Necrostatin-34
Based on 1 Customer Validation
Necrostatin-34 (Nec-34), a RIPK1 kinase inhibitor, stabilizes RIPK1 kinase in an inactive conformation by occupying a distinct binding pocket in the kinase domain.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 98.90%
- CAS. Nr.: 375835-43-1
- Formel: C18H16N4O2S2
- Molecular Weight:384.48
-
Speicherung:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
-
Apoptosis Compound Library
HY-L003
-
Immunology/Inflammation Compound Library
HY-L007
-
Kinase Inhibitor Library
HY-L009
-
NF-κB Signaling Compound Library
HY-L014
-
Anti-Cancer Compound Library
HY-L025
-
Heterocyclic Compound Library
HY-L138
-
Serine/Threonine Kinase Inhibitor Library
HY-L164
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
Protein Kinase Compound Library
HY-L196
-
High-Throughput Bioactive Compound Library
HY-L205
-
Posttranslational Modification Library
HY-L226
Biologische Aktivität
|
RIPK1 |
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| Jurkat | IC50 |
0.74 μM
Compound: Nec-34; N19
|
Cytotoxicity against human Jurkat cells assessed as cell viability measured for 48 hrs by Cell-titer glo luminescent based analysis
Cytotoxicity against human Jurkat cells assessed as cell viability measured for 48 hrs by Cell-titer glo luminescent based analysis
|
[PMID: 38199165] |
Necrostatin-34 (Nec-34) exhibits IC50 values of 667 nM and 134 nM for TNFα in FADD def-Jurkat cells and L939 cells, respectively[1].
Necrostatin-34 (Nec-34, 10 μM) inhibits the dimerization-induced RIPK1 activation as examined by phosphorylation of Ser166 (p-S166) of RIPK1, a biomarker for RIPK1 activation[1].
Necrostatin-34 (Nec-34) may block TNFα-induced complex II formation by inhibiting the activation of RIPK1 kinase[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:RIPK1 knockout L929 cells transfected with an expressing vector encoding an inducible and dimerizable RIPK1 fused with FKBP at the C-terminus.
-
Concentration:10 μM.
-
Incubation Time:30 min (and then 100 ng/mL TNFα was added for indicated periods of time).
-
Result:Downregulated p-S166 levels.
Chemical Information
-
CAS. Nr. 375835-43-1
-
Appearance Solid
-
Molecular Weight 384.48
-
Formel C18H16N4O2S2
-
Color Off-white to light yellow
-
SMILES
O=C(NC1=NC=CS1)CSC2=C(C#N)C(C3=CC=C(C)C=C3)CC(N2)=O
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Lösungsmittel & Löslichkeit
DMSO : 125 mg/mL (325.11 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (5.41 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (272 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.6009 mL | 13.0046 mL | 26.0092 mL | 65.0229 mL |
| 5 mM | 0.5202 mL | 2.6009 mL | 5.2018 mL | 13.0046 mL | |
| 10 mM | 0.2601 mL | 1.3005 mL | 2.6009 mL | 6.5023 mL | |
| 15 mM | 0.1734 mL | 0.8670 mL | 1.7339 mL | 4.3349 mL | |
| 20 mM | 0.1300 mL | 0.6502 mL | 1.3005 mL | 3.2511 mL | |
| 25 mM | 0.1040 mL | 0.5202 mL | 1.0404 mL | 2.6009 mL | |
| 30 mM | 0.0867 mL | 0.4335 mL | 0.8670 mL | 2.1674 mL | |
| 40 mM | 0.0650 mL | 0.3251 mL | 0.6502 mL | 1.6256 mL | |
| 50 mM | 0.0520 mL | 0.2601 mL | 0.5202 mL | 1.3005 mL | |
| 60 mM | 0.0433 mL | 0.2167 mL | 0.4335 mL | 1.0837 mL | |
| 80 mM | 0.0325 mL | 0.1626 mL | 0.3251 mL | 0.8128 mL | |
| 100 mM | 0.0260 mL | 0.1300 mL | 0.2601 mL | 0.6502 mL |
Necrostatin-34 Related Classifications
HY-132203 Related Classifications
Powered by Bioz