Onatasertib
Based on 3 publication(s) in Google Scholar
Onatasertib (CC-223) is a potent, selective, and orally bioavailable inhibitor of mTOR kinase, with an IC50 value for mTOR kinase of 16 nM. Onatasertib inhibits both mTORC1 and mTORC2.
For research use only. We do not sell to patients.
- Purity: 99.47%
- CAS No.: 1228013-30-6
- Formula: C21H27N5O3
- Molecular Weight:397.47
-
Storage:Powder -20°C, 3 years ; In solvent -80°C, 2 years , -20°C, 1 year
Publications Citing Use of MedChemExpress (MCE) Onatasertib
More-
WB
Biological Activity
|
mTOR 16 nM (IC50) |
mTORC1 |
mTORC2 |
DNA-PK 0.84 μM (IC50) |
PI3K-α 4 μM (IC50) |
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| Caco-2 | CC50 |
9.49 μM
Compound: CC-223
|
Toxicity against Caco-2 cells determined at 48 hours by intracellular ATP concentration using the CellTiter-Glo Luminescent Cell Viability Assay
Toxicity against Caco-2 cells determined at 48 hours by intracellular ATP concentration using the CellTiter-Glo Luminescent Cell Viability Assay
|
10.21203/rs.3.rs-23951/v1 |
| Caco-2 | IC50 |
16.78 μM
Compound: CC-223
|
Determination of IC50 values for inhibition of SARS-CoV-2 induced cytotoxicity of Caco-2 cells after 48 hours by high content imaging
Determination of IC50 values for inhibition of SARS-CoV-2 induced cytotoxicity of Caco-2 cells after 48 hours by high content imaging
|
10.21203/rs.3.rs-23951/v1 |
| PC-3 | IC50 |
0.01 μM
Compound: 37, CC-223
|
Inhibition of mTORC2 in human PC3 cells assessed as inhibition of Akt phosphorylation at S473 after 1 hr
Inhibition of mTORC2 in human PC3 cells assessed as inhibition of Akt phosphorylation at S473 after 1 hr
|
[PMID: 26083478] |
| PC-3 | IC50 |
0.03 μM
Compound: 37, CC-223
|
Inhibition of mTORC1 in human PC3 cells assessed as inhibition of S6 phosphorylation after 1 hr
Inhibition of mTORC1 in human PC3 cells assessed as inhibition of S6 phosphorylation after 1 hr
|
[PMID: 26083478] |
Onatasertib is a potent, selective, and orally bioavailable inhibitor of mTOR kinase, demonstrating inhibition of mTORC1 (pS6RP and p4EBP1) and mTORC2 [pAKT(S473)] in cellular systems. Onatasertib is selective for mTOR kinase with >200-fold selectivity over the related PI3K-α (IC50=4.0 μM). Of the PI3K related kinases tested, Onatasertib shows no significant inhibition of ATR or SMG1 and inhibits DNA-PK with an IC50 value of 0.84 μM. When screened in a single-point assay against a commercially available panel of 246 kinases, only three kinases other than mTOR are inhibited >80% at 10 μM by Onatasertib. Upon follow-up IC50 value determination, only two are inhibited by Onatasertib with IC50 values below 1 μM; FLT4 (0.651 μM) and cFMS (0.028 μM). The exquisite kinase selectivity of Onatasertib is confirmed upon evaluation in cellular systems using ActivX KiNavtiv profiling. Other than mTOR kinase, no kinase target is identified when HCT 116 or A549 cells are treated for 1 hour with 1 μM Onatasertib and assayed for kinase activity. Onatasertib shows a concentration-dependent reduction in each marker, with IC50 values of 31±2 nM for pS6RP, 405±47 nM for p4EBP1, and 11±10 nM for pAKT(S473) in western blot analysis. Inhibition of these pathway biomarkers is investigated in additional cell types from a variety of tissue origins. Onatasertib inhibits both mTORC1 (S6RP and 4EBP1) and mTORC2 [AKT(S473)] markers across the panel with IC50 ranges of 27 to 184 nM for pS6RP, 120 to 1,050 nM for p4EBP1 and 11 to 150 nM for pAKT(S473) [1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 1228013-30-6
-
Appearance Solid
-
Molecular Weight 397.47
-
Formula C21H27N5O3
-
Color Light yellow to yellow
-
SMILES
O=C1CNC2=NC=C(C3=CC=C(C(C)(O)C)N=C3)N=C2N1[C@H]4CC[C@H](OC)CC4
-
Synonyms
CC-223; ATG-008
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years In solvent -80°C 2 years -20°C 1 year
Publications (3)
-
Journal Impact Factor
-
Most Recent
-
Front Pharmacol
CC-223, NSC781406, and BGT226 Exerts a Cytotoxic Effect Against Pancreatic Cancer Cells via mTOR Signaling. [Abstract]2020 Nov 11;11:580407. PMID: 33343350 -
-
Oncotarget
2017 May 10;8(35):58469-58479. PMID: 28938571
Onatasertib purchased from MedChemExpress. Usage Cited in: Oncotarget. 2017 May 10;8(35):58469-58479. [Abstract]
CC223 blocks mTORC1 and mTORC2 activation in SKOV3 cells. SKOV3 cells are treated with CC223 (100 nM), cells are further cultured for implied time, mTOR-Raptor and mTOR-Rictor assembly is tested by Co-immunoprecipitation assay. Expressions of listed proteins are tested by the Western blotting assay.
Solvent & Solubility
DMSO : 50 mg/mL (125.80 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1.25 mg/mL (3.14 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 1.25 mg/mL (3.14 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocol
Counter screen against 246 protein kinases is outsourced and completed at a fixed CC-223 concentration (10 μM). Follow-up IC50 value determinations for ephrin type-B receptor 3 kinase (EPHB3), colony stimulating factor 1 receptor tyrosine kinase (CSF1R or cFMS), and FMS-related tyrosine kinase 4 (FLT4) are outsourced to Invitrogen[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
For other cell panel proliferation assays, CC-223 (1 nM, 100 nM and 1 μM) is spotted via an acoustic dispenser (EDC ATS-100) into an empty 384-well plate. Cells are diluted to desired densities and added directly to the compound-spotted plates. Cells are allowed to grow for 72 hours. Viability is assessed via Cell Titer-Glo. All data are normalized and represented as a percentage of the DMSO-treated cells. Results are then expressed as GI50 and/or IC50 values[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Mice[1]
Female 6- to 8-weeks-old CB17 SCID mice are inoculated s.c. with 2×106 PC-3 cells. When tumors reach approximately 125 mm3, mice are randomized and treated once daily, twice daily, or every 2 days orally with vehicle or various doses of CC-223, at a dose volume of 5 mL/kg. The twice-daily doses are administered with a 10 hours separation between the morning and evening doses. Tumor volumes are determined before the initiation of treatment and are considered as the starting volumes. Tumors are measured twice a week for the duration of the study. The long and short axes of each tumor are measured using a digital caliper in millimeters. The tumor volumes are calculated. The tumor volumes are expressed in cubic millimeters (mm3).
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Purity & Documentation
-
Data Sheet (281 KB)
-
SDS (396 KB)
- English - EN (396 KB)
- Français - FR (396 KB)
- Deutsch - DE (396 KB)
- Norwegian - NO (396 KB)
- Español - ES (396 KB)
- Swedish - SV (396 KB)
- Italian - IT (396 KB)
- Korean - KR (396 KB)
- Portuguese - PT (396 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.5159 mL | 12.5796 mL | 25.1591 mL | 62.8978 mL |
| 5 mM | 0.5032 mL | 2.5159 mL | 5.0318 mL | 12.5796 mL | |
| 10 mM | 0.2516 mL | 1.2580 mL | 2.5159 mL | 6.2898 mL | |
| 15 mM | 0.1677 mL | 0.8386 mL | 1.6773 mL | 4.1932 mL | |
| 20 mM | 0.1258 mL | 0.6290 mL | 1.2580 mL | 3.1449 mL | |
| 25 mM | 0.1006 mL | 0.5032 mL | 1.0064 mL | 2.5159 mL | |
| 30 mM | 0.0839 mL | 0.4193 mL | 0.8386 mL | 2.0966 mL | |
| 40 mM | 0.0629 mL | 0.3145 mL | 0.6290 mL | 1.5724 mL | |
| 50 mM | 0.0503 mL | 0.2516 mL | 0.5032 mL | 1.2580 mL | |
| 60 mM | 0.0419 mL | 0.2097 mL | 0.4193 mL | 1.0483 mL | |
| 80 mM | 0.0314 mL | 0.1572 mL | 0.3145 mL | 0.7862 mL | |
| 100 mM | 0.0252 mL | 0.1258 mL | 0.2516 mL | 0.6290 mL |