FTI-2153 TFA
Based on 1 Customer Validation
FTI-2153 TFA is a potent and highly selective inhibitor of farnesyltransferase (FTase), with an IC50 of 1.4 nM. FTI-2153 TFA is >3000-fold more potent at blocking H-Ras (IC50, 10 nM) than Rap1A processing. Anti-cancer activity.
For research use only. We do not sell to patients.
- Purity: 99.11%
- CAS No.: 2820151-01-5
- Formula: C27H31F3N4O5S
- Molecular Weight:580.62
-
Storage:
-20°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Biological Activity
FTI-2153, inhibits bipolar spindle formation during mitosis independently of transformation and Ras and p53 mutation status in two human lung cancer cell lines[2].
FTI-2153 increases the percentage of prometaphase cells with ring-like DNA morphology in transformed and non-transformed cells[2].
FTI-2153 (15 μM) inhibits T-24 and Calu-1 cell growth by 38 and 36%, respectively. NIH3T3, HFF and HT-1080 are less sensitive and are inhibited by only 8, 8 and 13%, respectively. A-549 and OVCAR3 cell growth is inhibited by 25 and 22%, respectively. Thus, even though T-24 and Calu-1 cells are equisensitive to FTI-2153 cell growth inhibition, FTI-2153 inhibits bipolar spindle formation only in Calu-1 cells. HFF and NIH3T3 cells are both resistant to FTI2153 growth inhibition, yet only NIH3T3 cells are resistant to FTI-2153 inhibition of bipolar spindle formation[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:NIH3T3, HFF, HT1080, T-24, OVCAR3, A-549 and Calu-1 CELLS.
-
Concentration:48 h.
-
Incubation Time:15 μM.
-
Result:When A-549 cells were treated with FTI-2153 (15 μM for 48 h), the proportion of cells at prometaphase increased relative to the other phases of mitosis.
FTI-2153 accumulated cells at prometaphase with a rosette-like morphology where chromosomes form a ring surrounding a monoaster of microtubules.
In all cells, except for T-24 and NIH3T3, FTI-2153 treatment increased the proportion of mitotic cells in prometaphase and decreased the percentage of cells in telophase/cytokinesis.
In HT1080 cells, the percentage of cells in prometaphase and telophase/ cytokinesis were 5 and 85% in control cells and 55 and 35% in Treated cells, respectively. Similarly results were also found in HFF cells. Calu-1 and A-549 cells, as described previously, had similarly large changes, whereas OVCAR3 had smaller changes. In contrast, FTI-2153 did not significantly affect the distribution of the different phases of mitosis in T-24 and NIH3T3 cells.
Chemical Information
-
CAS No. 2820151-01-5
-
Appearance Solid
-
Molecular Weight 580.62
-
Formula C27H31F3N4O5S
-
Color White to off-white
-
SMILES
CSCC[C@@H](C(OC)=O)NC(C1=CC=C(CNCC2=CN=CN2)C=C1C3=CC=CC=C3C)=O.OC(C(F)(F)F)=O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
-20°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Solvent & Solubility
DMSO : 90 mg/mL (155.01 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.25 mg/mL (3.88 mM); Clear solution
This protocol yields a clear solution of ≥ 2.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (22.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.25 mg/mL (3.88 mM); Clear solution
This protocol yields a clear solution of ≥ 2.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (22.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (276 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
[1]. Sun J, et al. Antitumor efficacy of a novel class of non-thiol-containing peptidomimetic inhibitors of farnesyltransferase and geranylgeranyltransferase I: combination therapy with the cytotoxic agents cisplatin, Taxol, and gemcitabine. Cancer Res. 1999 Oct 1;59(19):4919-26. [Content Brief]
[2]. N C Crespo, et al. The farnesyltransferase inhibitor, FTI-2153, inhibits bipolar spindle formation during mitosis independently of transformation and Ras and p53 mutation status. Cell Death Differ. 2002 Jul;9(7):702-9. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.7223 mL | 8.6115 mL | 17.2230 mL | 43.0574 mL |
| 5 mM | 0.3445 mL | 1.7223 mL | 3.4446 mL | 8.6115 mL | |
| 10 mM | 0.1722 mL | 0.8611 mL | 1.7223 mL | 4.3057 mL | |
| 15 mM | 0.1148 mL | 0.5741 mL | 1.1482 mL | 2.8705 mL | |
| 20 mM | 0.0861 mL | 0.4306 mL | 0.8611 mL | 2.1529 mL | |
| 25 mM | 0.0689 mL | 0.3445 mL | 0.6889 mL | 1.7223 mL | |
| 30 mM | 0.0574 mL | 0.2870 mL | 0.5741 mL | 1.4352 mL | |
| 40 mM | 0.0431 mL | 0.2153 mL | 0.4306 mL | 1.0764 mL | |
| 50 mM | 0.0344 mL | 0.1722 mL | 0.3445 mL | 0.8611 mL | |
| 60 mM | 0.0287 mL | 0.1435 mL | 0.2870 mL | 0.7176 mL | |
| 80 mM | 0.0215 mL | 0.1076 mL | 0.2153 mL | 0.5382 mL | |
| 100 mM | 0.0172 mL | 0.0861 mL | 0.1722 mL | 0.4306 mL |