MRX-2843
Based on 6 publication(s) in Google Scholar
MRX-2843 (UNC2371) is an orally active, ATP-competitive dual MERTK and FLT3 tyrosine kinases inhibitor (TKI) with enzymatic IC50s of 1.3 nM for MERTK and 0.64 nM for FLT3, respectively.
For research use only. We do not sell to patients.
- Purity: 99.92%
- CAS No.: 1429882-07-4
- Formula: C29H40N6O
- Molecular Weight:488.67
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
Publications Citing Use of MedChemExpress (MCE) MRX-2843
More-
Flow Cytometry
-
WB
-
RT-PCR
Biological Activity
MERTK, FLT3[1]
In the Kasumi-1 cell line, treatment with MRX-2843 results in dose-dependent inhibition of MERTK phosphorylation. Decreased phosphorylation is evident at concentrations as low as 10 nM, with near-complete abrogation of MERTK activation at 100 to 300 nM. Similarly, treatment of Kasumi-1 cells with MRX-2843 mediates inhibition of downstream signaling through pathways important for tumor cell survival and proliferation. MRX-2843 treatment results in a decrease in relative cell numbers, with an IC50 of 143.5±14.1 nM, indicating that MRX-2843 significantly inhibits tumor cell proliferation and/or survival. Similarly, there are 34.1%±5.6% and 67.1%±2.7% apoptotic and dead cells in NOMO-1 cultures treated with 150 nM or 300 nM MRX-2843, respectively, compare with 6.8%±0.7% in vehicle-treated cultures (P<0.001). Treatment with 50 nM and 100 nM MRX-2843 results in 62.3%±6.4% and 84.1%±7.8% inhibition of colony formation, respectively, in Kasumi-1 cultures (P<0.01). Similarly, in NOMO-1 cultures, colony formation is inhibited by 54.8%±18.1% in response to treatment with 100 nM MRX-2843 (P<0.001). In MOLM-14 cells, treatment with MRX-2843 inhibits phosphorylation of FLT3 and downstream signaling through STAT5, ERK1/2, and AKT. Activation of FLT3 and its signaling pathways is almost completely abrogated by treatment with 50 nM MRX-2843, indicating somewhat higher cellular potency against FLT3 relative to MERTK[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 1429882-07-4
-
Appearance Solid
-
Molecular Weight 488.67
-
Formula C29H40N6O
-
Color Off-white to light yellow
-
SMILES
O[C@H]1CC[C@H](N2C=C(C3=CC=C(CN4CCN(C)CC4)C=C3)C5=CN=C(NCCC6CC6)N=C52)CC1
-
Synonyms
UNC2371
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (6)
-
Journal Impact Factor
-
Most Recent
-
Cells
Inhibition of Mcl-1 Synergistically Enhances the Antileukemic Activity of Gilteritinib and MRX-2843 in Preclinical Models of FLT3-Mutated Acute Myeloid Leukemia. [Abstract]2022 Sep 3;11(17):2752. PMID: 36078163
MRX-2843 purchased from MedChemExpress. Usage Cited in: Cells. 2022 Sep 3;11(17):2752. [Abstract]
FLT3-ITD-positive MOLM-13 and MV4-11 cells treated with varying concentrations of AZD5991 (AZD), gilteritinib (gilt), or MRX-2843 (MRX) (10, 15, 20 nM), alone or in combination for 24 h were stained with annexin V-FITC/propidium iodide (PI) and analyzed using a flow cytometer.
MRX-2843 purchased from MedChemExpress. Usage Cited in: Cells. 2022 Sep 3;11(17):2752. [Abstract]
MOLM-13 cells were treated with AZD5991 (AZD), gilteritinib (gilt), or MRX-2843 (MRX) (15 nM), alone or in combination, for up to 24 h. Whole cell lysates were subjected to western blotting and probed with the indicated antibodies.
MRX-2843 purchased from MedChemExpress. Usage Cited in: Cells. 2022 Sep 3;11(17):2752. [Abstract]
MOLM-13 and MV4-11 cells were treated with AZD5991 (AZD), gilteritinib (gilt), or MRX-2843 (MRX) (15 nM), alone or in combination, for 3 h. Total RNA was extracted, and real-time RT-PCR was performed.
-
Vaccines
Small Molecule Inhibitors of MERTK and FLT3 Induce Cell Cycle Arrest in Human CD8+ T Cells. [Abstract]2021 Nov 8;9(11):1294. PMID: 34835225 -
Leuk Res
Combining the novel FLT3 and MERTK dual inhibitor MRX-2843 with venetoclax results in promising antileukemic activity against FLT3-ITD AML. [Abstract]2024 Sep:144:107547. PMID: 38968731 -
Head Neck
Dual Axl/MerTK inhibitor INCB081776 creates a proinflammatory tumor immune microenvironment and enhances anti-PDL1 efficacy in head and neck cancer. [Abstract]2023 May;45(5):1255-1271. PMID: 36939040 -
-
Solvent & Solubility
DMSO : 20 mg/mL (40.93 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 2 mg/mL (4.09 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 2 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2 mg/mL (4.09 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocol
Cell lines are cultured (10,000 cells/sample) in 0.35% Noble agar on a 0.5% Noble agar base layer and overlaid with cRPMI containing kinase inhibitor (including MRX-2843) or vehicle. The overlying medium is replaced 2 to 3 times per week, and vehicle treatment is assessed in duplicate. After 14 days or 21 days (Kasumi-1 cells only), colonies are stained with 1 mg/mL nitrotetrazolium blue for 4 hours and counted using a colony counter. Mononuclear cells are isolated from human cord blood and samples from acute myeloid leukemia (AML) patients. Patient samples are cultured in triplicate at a density of 1×106 cells/mL in MethoCult H4434 Classic Methylcellulose-Based Medium with Recombinant Cytokines for Human Cells containing MRX-2843 or vehicle. Colonies are counted after 10 days using the colony counter. Cord blood cells are incubated for 1 hour in serum-free Iscove’s modified Dulbecco’s medium (IMDM) supplemented with BIT 9500 Serum Substitute, low-density lipoproteins, and 2-ME, and then cultured in triplicate at a density of 2×106 cells/mL in Methocult H4434 methylcellulose containing MRX-2843 or vehicle. Colonies are manually counted in a blinded manner after 14 days[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Mice are used in this study. Established leukemia cell lines or mononuclear cells isolated from samples from patients with acute myeloid leukemia (AML) (1×106 to 2.5×106 per mouse) are suspended in PBS and injected into the tail veins of mice to establish xenografts. All mice are 4 to 6 months of age at the time of injection and are male, with the exception of the NOMO-1, MOLM-14:D835Y, and MOLM-14:F691L NSG xenografts, which are established in female mice. Myeloblasts are detected in peripheral blood (patient-derived xenografts) or bone marrow (MOLM-14 xenografts) samples after staining with a FITC-conjugated anti-human CD45 Ab. Samples are analyzed by flow cytometry using a Gallios flow cytometer and Kaluza software. After engraftment, the mice are weighed and treated once daily with MRX-2843, quizartinib, or vehicle administered by oral gavage in a volume of 10 mL/kg. When mice appear ill or lost more than 20% of their body weight, they are euthanized[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Purity & Documentation
-
Data Sheet (281 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.0464 mL | 10.2319 mL | 20.4637 mL | 51.1593 mL |
| 5 mM | 0.4093 mL | 2.0464 mL | 4.0927 mL | 10.2319 mL | |
| 10 mM | 0.2046 mL | 1.0232 mL | 2.0464 mL | 5.1159 mL | |
| 15 mM | 0.1364 mL | 0.6821 mL | 1.3642 mL | 3.4106 mL | |
| 20 mM | 0.1023 mL | 0.5116 mL | 1.0232 mL | 2.5580 mL | |
| 25 mM | 0.0819 mL | 0.4093 mL | 0.8185 mL | 2.0464 mL | |
| 30 mM | 0.0682 mL | 0.3411 mL | 0.6821 mL | 1.7053 mL | |
| 40 mM | 0.0512 mL | 0.2558 mL | 0.5116 mL | 1.2790 mL |