Targapremir-210
Based on 1 Customer Validation
Targapremir-210 (TGP-210) is a potent and selective miR-210 (miRNA-210, microRNA-210) inhibitor. Targapremir-210 inhibits pre-miR-210 processing with high binding affinity (Kd~200 nM). Targapremir-210 is a click chemistry reagent, it contains an Azide group and can undergo copper-catalyzed azide-alkyne cycloaddition reaction (CuAAc) with molecules containing Alkyne groups. It can also undergo strain-promoted alkyne-azide cycloaddition (SPAAC) reactions with molecules containing DBCO or BCN groups.
For research use only. We do not sell to patients.
- Purity: 98.20%
- CAS No.: 1049722-30-6
- Formula: C32H36N10O2
- Molecular Weight:592.69
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
Apoptosis Compound Library
HY-L003
-
Epigenetics Compound Library
HY-L005
-
Anti-Cancer Compound Library
HY-L025
-
Highly Selective Inhibitors Library
HY-L158
-
Highly Selective Activators Library
HY-L159
-
Cell Death Library
HY-L162
-
Bioactive Compound Library Max
HY-L181
-
Epigenetics Compound Library Mini
HY-L005M
-
Bioactive Compound Library
HY-L001
-
Non-Alcoholic Fatty Liver Disease (NAFLD) Compound Library
HY-L199
-
High-Throughput Bioactive Compound Library
HY-L205
-
Azide Compound Library
HY-L256
Biological Activity
IC50: 200 nM (miR-210, in MDA-MB-231 cells)[1].
Targapremir-210 decreases mature miR-210 levels in MDA-MB-231 cells cultured under hypoxic conditions, with an IC50 of ～200 nM[1].
Targapremir-210 (200 nM) induces MDA-MB-231 cells apoptosis is selective for the hypoxic environment. Targapremir-210 induces cells apoptosis under hypoxic conditions and does not induce apoptosis in MDA-MB-231 cells cultured in normoxia[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:NOD/SCID mice were subcutaneously transplanted cell suspension into breast fat pads[1].
-
Dosage:100 μL of 200 nM
-
Administration:Single i.p. injection 24 h post-transplantation
-
Result:Decreased tumor growth as assessed by luciferase signal intensity and mass of the resected tumor.
Chemical Information
-
CAS No. 1049722-30-6
-
Appearance Solid
-
Molecular Weight 592.69
-
Formula C32H36N10O2
-
Color Light yellow to yellow
-
SMILES
O=C(NCCCN=[N+]=[N-])CCCOC1=CC=CC(C2=NC3=CC=C(C4=NC5=CC=C(N6CCN(C)CC6)C=C5N4)C=C3N2)=C1
-
Synonyms
TGP-210
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Solvent & Solubility
DMSO : 250 mg/mL (421.81 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (3.51 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (3.51 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (270 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.6872 mL | 8.4361 mL | 16.8722 mL | 42.1806 mL |
| 5 mM | 0.3374 mL | 1.6872 mL | 3.3744 mL | 8.4361 mL | |
| 10 mM | 0.1687 mL | 0.8436 mL | 1.6872 mL | 4.2181 mL | |
| 15 mM | 0.1125 mL | 0.5624 mL | 1.1248 mL | 2.8120 mL | |
| 20 mM | 0.0844 mL | 0.4218 mL | 0.8436 mL | 2.1090 mL | |
| 25 mM | 0.0675 mL | 0.3374 mL | 0.6749 mL | 1.6872 mL | |
| 30 mM | 0.0562 mL | 0.2812 mL | 0.5624 mL | 1.4060 mL | |
| 40 mM | 0.0422 mL | 0.2109 mL | 0.4218 mL | 1.0545 mL | |
| 50 mM | 0.0337 mL | 0.1687 mL | 0.3374 mL | 0.8436 mL | |
| 60 mM | 0.0281 mL | 0.1406 mL | 0.2812 mL | 0.7030 mL | |
| 80 mM | 0.0211 mL | 0.1055 mL | 0.2109 mL | 0.5273 mL | |
| 100 mM | 0.0169 mL | 0.0844 mL | 0.1687 mL | 0.4218 mL |
Targapremir-210 Related Classifications
HY-15861 Related Classifications
Powered by Bioz