ASR-490
Based on 1 Customer Validation
ASR-490 reduces the viability of HCT116 and SW620 cells by downregulating Notch1 signaling. ASR-490 overcomes Notch1 overexpression and inhibits the growth of HCT/Notch1 transfectants. ASR-490 inhibits the tumor growth in control (pCMV/HCT116) and Notch1/HCT116 in xenotransplanted mice.
For research use only. We do not sell to patients.
- Purity: 99.20%
- CAS No.: 2690312-67-3
- Formula: C34H41NO7
- Molecular Weight:575.69
-
Storage:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
Notch1[1]
ASR-490 (0-1.6 µM; 24 h, 48 h) reduces the viability of HCT116 and SW620 cells in 24h (IC50 =750 nM in HCT116 cells, IC50 =1.2 µM in SW620 cells) and 48h (IC50 =600 nM in HCT116 cells, IC50 =850 nM in SW620 cells)[1]. ASR-490 (750 nM in HCT116 cells and 1.2 µM in SW620 cells, 24 h) shows apoptotic cell death and upregulation of the proapoptotic markers Bax and cleaved PARP Expression; inhibits the capability of colorectal cancer cells[1]. ASR-490 (HCT116 cells; 750 nM in 24 h, 600 nM in 48 h) overcomes Notch1 overexpression and inhibits the growth of HCT/Notch1 transfectants[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:HCT116, SW620 cells
-
Concentration:0-1.6 µM
-
Incubation Time:24 h, 48 h
-
Result:Reduced the viability of HCT116 and SW620 cells in 24h (IC50 =750 nM in HCT116 cells, IC50 =1.2 µM in SW620 cells) and 48h (IC50 =600 nM in HCT116 cells, IC50 =850 nM in SW620 cells).
-
Cell Line:HCT116, SW620 cells
-
Concentration:750 nM in HCT116 cells and 1.2 µM in SW620 cells
-
Incubation Time:24 h
-
Result:Showed apoptotic cell death and upregulation the proapoptotic markers Bax and cleaved PARP Expression, inhibited the capability of colorectal cancer cells.
-
Cell Line:HCT116 cells
-
Concentration:750 nM in 24 h, 600 nM in 48 h
-
Incubation Time:24 h, 48 h
-
Result:Overcome Notch1 overexpression and inhibited the growth of HCT/Notch1 transfectants.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Six- to 8-week-old BALB/c athymic nude mice (nu/nu) (pCMV/HCT116 and Notch1/HCT116 (C4) xenografts)[1].
-
Dosage:5 mg/kg
-
Administration:i.p., thrice a week for 4 weeks
-
Result:Inhibited the tumor growth in control (pCMV/HCT116) and Notch1/HCT116 in xenotransplanted mice.
Chemical Information
-
CAS No. 2690312-67-3
-
Appearance Solid
-
Molecular Weight 575.69
-
Formula C34H41NO7
-
Color White to light yellow
-
SMILES
C[C@]([C@](CC[C@@]12C)([H])[C@@]([C@]1([H])CC[C@]2([H])[C@@H]([C@@](OC3=O)([H])CC(C)=C3CO)C)([H])C4)(C5=O)[C@@]6([C@H](C=C5)OC(C7=CC=CC=N7)=O)[C@]4([H])O6
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 25 mg/mL (43.43 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.34 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (4.34 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (278 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.7370 mL | 8.6852 mL | 17.3705 mL | 43.4261 mL |
| 5 mM | 0.3474 mL | 1.7370 mL | 3.4741 mL | 8.6852 mL | |
| 10 mM | 0.1737 mL | 0.8685 mL | 1.7370 mL | 4.3426 mL | |
| 15 mM | 0.1158 mL | 0.5790 mL | 1.1580 mL | 2.8951 mL | |
| 20 mM | 0.0869 mL | 0.4343 mL | 0.8685 mL | 2.1713 mL | |
| 25 mM | 0.0695 mL | 0.3474 mL | 0.6948 mL | 1.7370 mL | |
| 30 mM | 0.0579 mL | 0.2895 mL | 0.5790 mL | 1.4475 mL | |
| 40 mM | 0.0434 mL | 0.2171 mL | 0.4343 mL | 1.0857 mL |