ATIC-IN-1 acetate
Based on 1 publication(s) in Google Scholar
ATIC-IN-1 (compound 14) acetate is an inhibitor targeting to Aminoimidazole carboxamide ribonucleotide transformylase/inosine monophosphate cyclohydrolase (ATIC) dimerization with a Ki value of 685 nM, whcich catalyzes de novo purine biosynthesis. ATIC dimerization is crucial for its aminoimidazole carboxamide ribonucleotide (AICAR) transformylase activity. ATIC-IN-1 acetate exhibits anti-tumor activity via reduction in cell numbers and cell division rates.
For research use only. We do not sell to patients.
- Purity: 99.96%
- CAS No.: 3067165-96-9
- Formula: C23H37N7O7
- Molecular Weight:523.58
-
Storage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) ATIC-IN-1 acetate
More
Biological Activity
ATIC-IN-1 acetate (10 μM, 50 μM) is a specific inhibitor, and shows nonspecific aggregate mechanism in the present of 1 mg/mL and 10 mg/mL BSA[1].
ATIC-IN-1 acetate (100-500 μM; 48 h) inhibits the proliferation of MCF-7 cells[1].
ATIC-IN-1 acetate (250 μM; 24-72 h) results the reduction of division rather than leads to cell death increase[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 3067165-96-9
-
Appearance Solid
-
Molecular Weight 523.58
-
Formula C23H37N7O7
-
Color White to off-white
-
SMILES
N=C(N)NCCC[C@H](NC(C)=O)C(N[C@H](C(N(CC)CC)=O)CC1=CC=C(C=C1)[N+]([O-])=O)=O.CC(O)=O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Am J Physiol Cell Physiol
Glycolytic metabolism and biomass production from glucose in human skeletal muscle growth. [Abstract]2025 Nov 1;329(5):C1560-C1576. PMID: 41071646
Solvent & Solubility
DMSO : 50 mg/mL (95.50 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 50 mg/mL (95.50 mM; Need ultrasonic)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.77 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (4.77 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Purity & Documentation
-
Data Sheet (272 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO / H2O | 1 mM | 1.9099 mL | 9.5496 mL | 19.0993 mL | 47.7482 mL |
| 5 mM | 0.3820 mL | 1.9099 mL | 3.8199 mL | 9.5496 mL | |
| 10 mM | 0.1910 mL | 0.9550 mL | 1.9099 mL | 4.7748 mL | |
| 15 mM | 0.1273 mL | 0.6366 mL | 1.2733 mL | 3.1832 mL | |
| 20 mM | 0.0955 mL | 0.4775 mL | 0.9550 mL | 2.3874 mL | |
| 25 mM | 0.0764 mL | 0.3820 mL | 0.7640 mL | 1.9099 mL | |
| 30 mM | 0.0637 mL | 0.3183 mL | 0.6366 mL | 1.5916 mL | |
| 40 mM | 0.0477 mL | 0.2387 mL | 0.4775 mL | 1.1937 mL | |
| 50 mM | 0.0382 mL | 0.1910 mL | 0.3820 mL | 0.9550 mL | |
| 60 mM | 0.0318 mL | 0.1592 mL | 0.3183 mL | 0.7958 mL | |
| 80 mM | 0.0239 mL | 0.1194 mL | 0.2387 mL | 0.5969 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
ATIC-IN-1 acetate Related Classifications
HY-150252A Related Classifications
Powered by Bioz