Ioversol
Based on 1 Customer Validation
Ioversol (MP-328) is a nonionic iodinated contrast medium (CM) that is used during a CT scan or x-ray in animal experiment. Ioversol does not damage the blood-brain barrier (BBB) in animal.
For research use only. We do not sell to patients.
- Purity: 98.0%
- CAS No.: 87771-40-2
- Formula: C18H24I3N3O9
- Molecular Weight:807.11
-
Storage:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Protocol
- Purity & Documentation
- References
-
Help & FAQs
Biological Activity
Ioversol (100 mg iodine/ml) exposure induces significantly increased lactate dehydrogenase release and decreased 3-(4,5-dimethyldiazol-2-yl)-2,5-diphenyl tetrazolium bromide conversion in NRK-52E cells. Ioversol significantly increases apoptosis and caspase-3 protein expression in the NRK-52E cells. Ioversol treatment induces a significant increase in [Ca2+]i and intracellular ROS[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 87771-40-2
-
Appearance Solid
-
Molecular Weight 807.11
-
Formula C18H24I3N3O9
-
Color White to off-white
-
SMILES
O=C(C1=C(I)C(N(C(CO)=O)CCO)=C(I)C(C(NCC(O)CO)=O)=C1I)NCC(O)CO
-
Synonyms
MP-328
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Solvent & Solubility
H2O : 500 mg/mL (619.49 mM; Need ultrasonic)
DMSO : ≥ 100 mg/mL (123.90 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (3.10 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (3.10 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Protocol
Cell viability is assessed by using the MTT uptake assay. The conversion of MTT, a tetrazolium salt, into formazan depends on the activity of a group of mitochondrial dehydrogenases and, thus, is an indicator of cell metabolic activity. The color of MTT tetrazole salt is measured with a spectrophotometer at the wavelength of 570 nm. Briefly, fresh MTT solution (10 mg/mL in 1× PBS) is added (1:20 volume of medium) after removing the medium and the cells are incubated for 1.5 h. The cells are lysed and purple formazan dissolved into the solution by overnight incubation with MTT lysis buffer. The results are expressed as the percentage of undamaged control cells, assuming the absorbance of control wells as 100%.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Purity & Documentation
-
Data Sheet (276 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
[1]. Yang D, et al. Selective inhibition of the reverse mode of Na(+)/Ca(2+) exchanger attenuates contrast-induced cell injury. Am J Nephrol. 2013;37(3):264-73. doi: 10.1159/000348526. Epub 2013 Mar 13. [Content Brief]
[2]. Heyman SN, et al. Effects of ioversol versus iothalamate on endothelin release and radiocontrast nephropathy. Invest Radiol. 1993 Apr;28(4):313-8. [Content Brief]
[3]. J Ueda, et al. Elimination of ioversol by hemodialysis. Acta Radiol. 1996 Sep;37(5):826-9. [Content Brief]
[4]. N Motoji , et al. Comparison of the effects of ioversol and other contrast media on the blood-brain barrier. Biol Pharm Bull. 1994 Feb;17(2):257-61. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO / H2O | 1 mM | 1.2390 mL | 6.1949 mL | 12.3899 mL | 30.9747 mL |
| 5 mM | 0.2478 mL | 1.2390 mL | 2.4780 mL | 6.1949 mL | |
| 10 mM | 0.1239 mL | 0.6195 mL | 1.2390 mL | 3.0975 mL | |
| 15 mM | 0.0826 mL | 0.4130 mL | 0.8260 mL | 2.0650 mL | |
| 20 mM | 0.0619 mL | 0.3097 mL | 0.6195 mL | 1.5487 mL | |
| 25 mM | 0.0496 mL | 0.2478 mL | 0.4956 mL | 1.2390 mL | |
| 30 mM | 0.0413 mL | 0.2065 mL | 0.4130 mL | 1.0325 mL | |
| 40 mM | 0.0310 mL | 0.1549 mL | 0.3097 mL | 0.7744 mL | |
| 50 mM | 0.0248 mL | 0.1239 mL | 0.2478 mL | 0.6195 mL | |
| 60 mM | 0.0206 mL | 0.1032 mL | 0.2065 mL | 0.5162 mL | |
| 80 mM | 0.0155 mL | 0.0774 mL | 0.1549 mL | 0.3872 mL | |
| 100 mM | 0.0124 mL | 0.0619 mL | 0.1239 mL | 0.3097 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Ioversol Related Classifications
HY-B1410 Related Classifications
Powered by Bioz