Sodium formate
Based on 1 Customer Validation
Sodium formate acts as a key promoter for heterogeneous nucleation of ZIF crystals and thin film synthesis. It is also recognized as a GRAS substance by the FDA, and serves as a cosmetic preservative and food additive. Sodium formate has low acute oral toxicity (acute oral LD50=7410 mg/kg and acute intravenous LD50=807 mg/kg in mice), with no heritable or carcinogenic effects, but exhibits embryonic developmental toxicity and teratogenicity at high concentrations. Sodium formate may cause moderate irritation to rabbit eyes, is relatively safe to the skin, and does not induce tumor formation in rats in vivo. Sodium formate is rapidly absorbed and oxidized to carbon dioxide in vivo, and forms DNA adducts in specific metabolic deficiency models or upon high-dose exposure.
商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。
- 純度: 99.7%
- CAS 番号: 141-53-7
- 分子式: HCOONa
- 分子量:68.01
-
保管条件:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
生物活性
-
化学情報
-
溶剤 & 溶解度
- 純度とドキュメンテーション
- 参考文献
-
Help & FAQs
-
Cell Cycle/DNA Damage Compound Library
HY-L004
-
Anti-Aging Compound Library
HY-L034
-
Food Additive Library
HY-L093
-
Human Metabolite Library
HY-L123
-
Highly Selective Inhibitors Library
HY-L158
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Cosmetic Ingredient Compound Library
HY-L221
DNA/RNA Synthesis アイソフォーム固有の製品をすべて表示
More
生物活性
Sodium formate (5.9-44.1 mM; 24 h) is embryotoxic and dysmorphogenic in a concentration-dependent manner in cultured CD-1 mouse embryos[2].
Sodium formate (1 mM; 6 h) completely attenuates the inhibitory effect of 5 mM MAA on DNA synthesis in CD-1 mouse embryos cultured in serum-free medium, with no independent effect on DNA synthesis[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:CD-1 Mouse In Vitro Embryos
-
Concentration:5.9, 11.8, 23.5, 29.4, 44.1 mM
-
Incubation Time:24 h
-
Result:Exhibited embryotoxic and dysmorphogenic effect in a concentration-dependent manner in cultured CD-1 mouse embryos.
Sodium formate (2,000 mg/kg; applied topically to skin; 24 h) does not cause death, skin reactions or systemic toxicity in Wistar rats, with an acute dermal LD50 greater than 2,000 mg/kg body weight[2].
Sodium formate (2,000 mg/kg; i.p.) induces free radical generation in male Fischer rats, and free radical adducts are detectable in bile and urine[2].
Sodium formate (5-100 mg/kg; i.p.) is rapidly oxidized to CO2 in mice; homozygous NEUT2 mice show reduced oxidative activity only at the low intraperitoneal dose of 5 mg/kg, while at the high intraperitoneal dose of 100 mg/kg, the oxidation rates of normal mice and homozygous NEUT2 mice are identical[2].
Sodium formate (0.1 mL; instilled intraocularly) causes moderate to severe conjunctival irritation and necrosis in New Zealand white rabbits, with all reactions fully resolving by day 17[2].
Topical application of sodium formate (24 h or 14 d) does not cause skin irritation when applied to abraded rabbit skin, nor does it induce local skin irritation or systemic toxicity when applied to the skin of Fischer 344/N rats[2].
Sodium formate (750 mg/kg; p.o.) does not increase the incidence of neural tube defects in fetuses of CD-1 mice at gestational day 8[2].
Sodium formate (59-945 mg/kg/d; daily; p.o.) exerts no maternal toxicity, embryonic toxicity or teratogenic effects in pregnant Wistar rats at gestational days 6-19, with a NOAEL of 945 mg/kg body weight per day[2].
Sodium formate (100-1,000 mg/kg/d; daily; p.o.) causes no maternal or reproductive toxicity in pregnant Himalayan rabbits at gestational days 6-28, with a NOAEL of 1,000 mg/kg/day[2].
[14C] Sodium formate (0.01-100 mg/kg; p.o.) induces dose-dependent formation of DNA and hemoglobin adducts in male Kunming mice. Among these, hepatic DNA adducts reach a peak at 24 h post-administration, while hemoglobin adducts enter a plateau phase between 24 h and 120 h post-administration[2].
Sodium formate (1% in drinking water; 1.5 years) does not induce tumor formation in Wistar rats[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Kunming mice (male; 8-10 mice per group)[2]
-
Dosage:0.01 mg/kg; 0.1 mg/kg; 1 mg/kg; 10 mg/kg; 100 mg/kg
-
Administration:oral; single dose
-
Result:Observed binding of 14C-formate to DNA and hemoglobin.
Showed both DNA and hemoglobin adduct formation were linearly correlated (r > 0.998) with dose in a log/log plot over the entire dose range.
Found liver DNA adduct formation was slightly higher than kidney DNA adduct formation, and DNA binding was ~100-fold higher than hemoglobin adduct formation.
In time course study, hemoglobin adducts peaked at 2 hours postdosing (~8 adducts/106 amino acid residues), decreased to ~2 adducts/106 amino acid residues by 6 hours, and reached a plateau of ~12 adducts/106 amino acid residues from 24 to 120 hours postdosing.
Found liver DNA adducts increased to ~8 adducts/104 nucleotides at 24 hours postdosing, then decreased to ~3 adducts/104 nucleotides by 72 hours postdosing.
化学情報
-
CAS 番号 141-53-7
-
性状 Solid
-
分子量 68.01
-
分子式 HCOONa
-
Color Off-white to gray
-
SMILES
O=CO[Na]
-
輸送条件
Room temperature in continental US; may vary elsewhere.
-
保管条件
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
溶剤 & 溶解度
H2O : ≥ 100 mg/mL (1470.37 mM)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
純度とドキュメンテーション
-
データシート (283 KB)
-
SDS (394 KB)
- English - EN (394 KB)
- Français - FR (394 KB)
- Deutsch - DE (394 KB)
- Norwegian - NO (394 KB)
- Español - ES (394 KB)
- Swedish - SV (394 KB)
- Italian - IT (394 KB)
- Korean - KR (394 KB)
- Portuguese - PT (394 KB)
-
取扱説明書 (2659 KB)
参考文献
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O | 1 mM | 14.7037 mL | 73.5186 mL | 147.0372 mL | 367.5930 mL |
| 5 mM | 2.9407 mL | 14.7037 mL | 29.4074 mL | 73.5186 mL | |
| 10 mM | 1.4704 mL | 7.3519 mL | 14.7037 mL | 36.7593 mL | |
| 15 mM | 0.9802 mL | 4.9012 mL | 9.8025 mL | 24.5062 mL | |
| 20 mM | 0.7352 mL | 3.6759 mL | 7.3519 mL | 18.3796 mL | |
| 25 mM | 0.5881 mL | 2.9407 mL | 5.8815 mL | 14.7037 mL | |
| 30 mM | 0.4901 mL | 2.4506 mL | 4.9012 mL | 12.2531 mL | |
| 40 mM | 0.3676 mL | 1.8380 mL | 3.6759 mL | 9.1898 mL | |
| 50 mM | 0.2941 mL | 1.4704 mL | 2.9407 mL | 7.3519 mL | |
| 60 mM | 0.2451 mL | 1.2253 mL | 2.4506 mL | 6.1265 mL | |
| 80 mM | 0.1838 mL | 0.9190 mL | 1.8380 mL | 4.5949 mL | |
| 100 mM | 0.1470 mL | 0.7352 mL | 1.4704 mL | 3.6759 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Sodium formate 関連分類
HY-W088065 関連分類
Powered by Bioz