RI(dl)-2 TFA
Based on 1 publication(s) in Google Scholar
RI(dl)-2 TFA is a potent and selective RAD51-mediated D-loop formation inhibitor with an IC50 of 11.1 μM. RI(dl)-2 TFA does not influence RAD51 binding to ssDNA and inhibits homologous recombination (HR) activity in human cells (IC50 of 3.0 μM).
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 98.8%
- 화학식: C19H17N3.(1.3)C2HF3O2
- 분자량:435.59
-
보관:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) RI(dl)-2 TFA
More
Biological Activity
IC50: 11.1 μM (RAD51-mediated D-loop formation)[1]
RI(dl)-2 stabilizes nucleoprotein filaments in a nonfunctional state, which are incapable of D-loop activity and simultaneously shielded from related (e.g., RAD52-mediated) pathways that promote single-strand annealing (SSA)[1].
RI(dl)-2 does not modulate the affinity of RAD51 to ssDNA or the stability of preformed RAD51-ssDNA complexes when challenged with high concentrations of salt[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
Appearance Solid
-
분자량 435.59
-
화학식 C19H17N3.(1.3)C2HF3O2
-
Color Purple to purplish red
-
SMILES
CCNC1=CC=C(C2=NC3=C(N4C2=CC=C4)C=CC=C3)C=C1.OC(C(F)(F)F)=O.[1.3]
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Nat Cell Biol
2025 Jan;27(1):59-72. PMID: 39805921
용액&용해도
DMSO : ≥ 50 mg/mL (114.79 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1.25 mg/mL (2.87 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 1.25 mg/mL (2.87 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (271 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.2957 mL | 11.4787 mL | 22.9574 mL | 57.3934 mL |
| 5 mM | 0.4591 mL | 2.2957 mL | 4.5915 mL | 11.4787 mL | |
| 10 mM | 0.2296 mL | 1.1479 mL | 2.2957 mL | 5.7393 mL | |
| 15 mM | 0.1530 mL | 0.7652 mL | 1.5305 mL | 3.8262 mL | |
| 20 mM | 0.1148 mL | 0.5739 mL | 1.1479 mL | 2.8697 mL | |
| 25 mM | 0.0918 mL | 0.4591 mL | 0.9183 mL | 2.2957 mL | |
| 30 mM | 0.0765 mL | 0.3826 mL | 0.7652 mL | 1.9131 mL | |
| 40 mM | 0.0574 mL | 0.2870 mL | 0.5739 mL | 1.4348 mL | |
| 50 mM | 0.0459 mL | 0.2296 mL | 0.4591 mL | 1.1479 mL | |
| 60 mM | 0.0383 mL | 0.1913 mL | 0.3826 mL | 0.9566 mL | |
| 80 mM | 0.0287 mL | 0.1435 mL | 0.2870 mL | 0.7174 mL | |
| 100 mM | 0.0230 mL | 0.1148 mL | 0.2296 mL | 0.5739 mL |
RI(dl)-2 TFA Related Classifications
HY-126972A Related Classifications
Powered by Bioz