Aristolochic acid C
Based on 1 Customer Validation
Aristolochic acid C is a derivative of Aristolochic acid. Aristolochic acid is a phospholipase A2 (PLA2) inhibitor, which disrupts cortical microtubule arrays and root growth in Arabidopsis.
For research use only. We do not sell to patients.
- Purity: 99.77%
- CAS No.: 4849-90-5
- Formula: C16H9NO7
- Molecular Weight:327.25
-
Storage:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
Natural Product Library
HY-L021
-
Anti-Cancer Compound Library
HY-L025
-
Anti-Cardiovascular Disease Compound Library
HY-L046
-
Phenols Library
HY-L057
-
Traditional Chinese Medicine Active Compound Library
HY-L065
-
Anti-Cancer Natural Product Library
HY-L107
-
Plant-Sourced Natural Product Library
HY-L115
-
Coagulation and Anti-coagulation Compound Library
HY-L136
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Natural Product Library Plus
HY-L021P
-
Natural Product and Natural Product-Like Compound Library
HY-L021M
-
Bioactive Compound Library
HY-L001
-
Miao Ethnicity Medicine Compound Library
HY-L190
-
RO5 Drug-like Natural Product Library
HY-L200
-
High-Throughput Bioactive Compound Library
HY-L205
-
High-Throughput Natural Product Library
HY-L206
-
Antitussive and Antiasthmatic Traditional Chinese Medicine Active Compound Library
HY-L223
-
Diarrhea-Related Traditional Chinese Medicine Active Compound Library
HY-L224
-
Mongolian Medicine Compound Library
HY-L238
-
Mass Spectrometry Natural Product Library
HY-L262
All Phospholipase Isoforms
More
Biological Activity
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| Neutrophil | IC50 |
>10 μg/mL
Compound: 6
|
Antiinflammatory activity in human neutrophils assessed as inhibition of fMLP/CB-induced elastase release after 5 mins
Antiinflammatory activity in human neutrophils assessed as inhibition of fMLP/CB-induced elastase release after 5 mins
|
[PMID: 21353775] |
| Neutrophil | IC50 |
>10 μg/mL
Compound: 6
|
Antiinflammatory activity in human neutrophils assessed as inhibition of fMLP/CB-induced superoxide anion generation after 5 mins
Antiinflammatory activity in human neutrophils assessed as inhibition of fMLP/CB-induced superoxide anion generation after 5 mins
|
[PMID: 21353775] |
Chemical Information
-
CAS No. 4849-90-5
-
Appearance Solid
-
Molecular Weight 327.25
-
Formula C16H9NO7
-
Color Light yellow to orange
-
SMILES
O=C(C1=C2C([N+]([O-])=O)=CC3=CC=C(O)C=C3C2=C(OCO4)C4=C1)O
-
Structure Classification
-
Initial Source
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Solvent & Solubility
DMSO : 125 mg/mL (381.97 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (6.36 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (275 KB)
-
SDS (584 KB)
- English - EN (584 KB)
- Français - FR (584 KB)
- Deutsch - DE (584 KB)
- Norwegian - NO (584 KB)
- Español - ES (584 KB)
- Swedish - SV (584 KB)
- Italian - IT (584 KB)
- Portuguese - PT (584 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.0558 mL | 15.2788 mL | 30.5577 mL | 76.3942 mL |
| 5 mM | 0.6112 mL | 3.0558 mL | 6.1115 mL | 15.2788 mL | |
| 10 mM | 0.3056 mL | 1.5279 mL | 3.0558 mL | 7.6394 mL | |
| 15 mM | 0.2037 mL | 1.0186 mL | 2.0372 mL | 5.0929 mL | |
| 20 mM | 0.1528 mL | 0.7639 mL | 1.5279 mL | 3.8197 mL | |
| 25 mM | 0.1222 mL | 0.6112 mL | 1.2223 mL | 3.0558 mL | |
| 30 mM | 0.1019 mL | 0.5093 mL | 1.0186 mL | 2.5465 mL | |
| 40 mM | 0.0764 mL | 0.3820 mL | 0.7639 mL | 1.9099 mL | |
| 50 mM | 0.0611 mL | 0.3056 mL | 0.6112 mL | 1.5279 mL | |
| 60 mM | 0.0509 mL | 0.2546 mL | 0.5093 mL | 1.2732 mL | |
| 80 mM | 0.0382 mL | 0.1910 mL | 0.3820 mL | 0.9549 mL | |
| 100 mM | 0.0306 mL | 0.1528 mL | 0.3056 mL | 0.7639 mL |
Powered by Bioz