Olmesartan medoxomil
Based on 1 Customer Validation
Olmesartan medoxomil is a potent and selective angiotensin AT1 receptor inhibitor with IC50 of 66.2 μM.
For research use only. We do not sell to patients.
- Purity: 98.95%
- CAS No.: 144689-63-4
- Formula: C29H30N6O6
- Molecular Weight:558.59
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
All Angiotensin Receptor Isoforms
More
Biological Activity
|
AT1 Receptor |
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| Vero C1008 | EC50 |
>40 μM
Compound: Olmesartan
|
Antiviral efficacy against SARS-CoV-2 (strain BavPat1) in Vero E6 cells assessed by inhibition of viral RNA replication measured by RT-PCR after 2 days
Antiviral efficacy against SARS-CoV-2 (strain BavPat1) in Vero E6 cells assessed by inhibition of viral RNA replication measured by RT-PCR after 2 days
|
10.1101/2020.04.03.023846 |
Inhibition of Arachidonic acid (AA) metabolism by angiotensin II receptor blockers (ARBs) is detected in a concentration-dependent manner with IC50 of Olmesartan (66.2 μM)[1]. Olmesartan medoxomil (OLM) is a potent and selective angiotensin AT1 receptor blocker[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 144689-63-4
-
Appearance Solid
-
Molecular Weight 558.59
-
Formula C29H30N6O6
-
Color White to yellow
-
SMILES
O=C(OCC1=C(OC(O1)=O)C)C2=C(N=C(N2CC3=CC=C(C=C3)C4=CC=CC=C4C5=NN=NN5)CCC)C(O)(C)C
-
Synonyms
CS 866
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Solvent & Solubility
DMSO : 50 mg/mL (89.51 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Ethanol : 12.5 mg/mL (22.38 mM; Need ultrasonic)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 2.08 mg/mL (3.72 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 2.08 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (3.72 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocol
Mice[3]
10 to 12-week old male db/db diabetic mice with background strain C57BL/KsJ and their age-matched non-diabetic lean control mice (C57BL) are used.10 non-diabetic control mice and 10 diabetic mice are fed with placebo (0.5% sodium CMC/saline solution), and 10 diabetic mice are fed with 20 mg/kg Olmesartan (MB5704) by daily gavage for 12 weeks. Mice are monitored for blood glucose, body weight and urine output every two weeks. After treatment, mice are euthanized and trunk blood is collected and is centrifuged to obtain plasma which is aliquoted and stored at -80°C. Kidney tissues are removed from mice. For protein extraction slices of the kidney tissue are frozen in liquid nitrogen, and stored at -80°C. Other parts of the kidney tissue are fixed with 4% paraformaldehyde and embedded in paraffin for immunostaining.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Purity & Documentation
-
Data Sheet (277 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
[1]. Senda A, et al. Effects of Angiotensin II Receptor Blockers on Metabolism of Arachidonic Acid via CYP2C8. Biol Pharm Bull. 2015;38(12):1975-9. [Content Brief]
[2]. Shah S, et al. Simultaneous Quantitative Analysis of Olmesartan Medoxomil and Amlodipine Besylate in Plasma by High-performance Liquid Chromatography Technique. J Young Pharm. 2012 Apr;4(2):88-94. [Content Brief]
[3]. Gu J, et al. Olmesartan Prevents Microalbuminuria in db/db Diabetic Mice Through Inhibition of Angiotensin II/p38/SIRT1-Induced Podocyte Apoptosis. Kidney Blood Press Res. 2016 Nov 21;41(6):848-864. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| Ethanol / DMSO | 1 mM | 1.7902 mL | 8.9511 mL | 17.9022 mL | 44.7555 mL |
| 5 mM | 0.3580 mL | 1.7902 mL | 3.5804 mL | 8.9511 mL | |
| 10 mM | 0.1790 mL | 0.8951 mL | 1.7902 mL | 4.4756 mL | |
| 15 mM | 0.1193 mL | 0.5967 mL | 1.1935 mL | 2.9837 mL | |
| 20 mM | 0.0895 mL | 0.4476 mL | 0.8951 mL | 2.2378 mL | |
| DMSO | 25 mM | 0.0716 mL | 0.3580 mL | 0.7161 mL | 1.7902 mL |
| 30 mM | 0.0597 mL | 0.2984 mL | 0.5967 mL | 1.4919 mL | |
| 40 mM | 0.0448 mL | 0.2238 mL | 0.4476 mL | 1.1189 mL | |
| 50 mM | 0.0358 mL | 0.1790 mL | 0.3580 mL | 0.8951 mL | |
| 60 mM | 0.0298 mL | 0.1492 mL | 0.2984 mL | 0.7459 mL | |
| 80 mM | 0.0224 mL | 0.1119 mL | 0.2238 mL | 0.5594 mL |