SU5408
Based on 6 publication(s) in Google Scholar
SU5408 (VEGFR2 Kinase Inhibitor I) is a potent and cell-permeable inhibitor of VEGFR2 kinase with an IC50 of 70 nM.
For research use only. We do not sell to patients.
- Purity: 98.0%
- CAS No.: 15966-93-5
- Formula: C18H18N2O3
- Molecular Weight:310.35
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
Publications Citing Use of MedChemExpress (MCE) SU5408
MoreAll VEGFR Isoforms
More
Biological Activity
|
VEGFR2 70 nM (IC50) |
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| BaF3 | IC50 |
2.6 μM
Compound: VEGFR2KI-I
|
Growth inhibition of mouse BA/F3 cells assessed as incorporation of [3H]thymidine incorporation after 72 hrs by liquid scintillation counting
Growth inhibition of mouse BA/F3 cells assessed as incorporation of [3H]thymidine incorporation after 72 hrs by liquid scintillation counting
|
[PMID: 20117004] |
| Sf9 | IC50 |
0.76 μM
Compound: VEGFR2KI-I
|
Inhibition of human recombinant His-tagged RET expressed in Sf9 insect cells
Inhibition of human recombinant His-tagged RET expressed in Sf9 insect cells
|
[PMID: 20117004] |
3-Substituted indolin-2-ones have been designed and synthesized as a novel class of tyrosine kinase inhibitors which exhibit selectivity toward different receptor tyrosine kinases (RTKs). These compounds have been evaluated for their relative inhibitory properties against a panel of RTKs in intact cells. SU5408 (VEGFR2 Kinase Inhibitor I) is found to be the most potent and selective VEGFR2 inhibitor among the compounds. SU5408 (VEGFR2 Kinase Inhibitor I) shows little or no effect against receptors for platelet-derived growth factor, epidermal growth factor, or insulin-like growth factor (IC50>100 μM)[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 15966-93-5
-
Appearance Solid
-
Molecular Weight 310.35
-
Formula C18H18N2O3
-
Color Yellow to orange
-
SMILES
O=C(C1=C(C)NC(/C=C2C(NC3=C\2C=CC=C3)=O)=C1C)OCC
-
Synonyms
VEGFR2 Kinase Inhibitor I
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (6)
-
Journal Impact Factor
-
Most Recent
-
Adv Sci (Weinh)
2025 May 31:e03505. PMID: 40448612 -
Sci Adv
Sulfated polysaccharide directs therapeutic angiogenesis via endogenous VEGF secretion of macrophages. [Abstract]2021 Feb 10;7(7):eabd8217. PMID: 33568481 -
Angiogenesis
D-Peptide analogues of Boc-Phe-Leu-Phe-Leu-Phe-COOH induce neovascularization via endothelial N-formyl peptide receptor 3. [Abstract]2020 Aug;23(3):357-369. PMID: 32152757 -
-
Nutr Diabetes
Non-pharmacological interventions of intermittent fasting and pulsed radiofrequency energy (PRFE) combination therapy promote diabetic wound healing. [Abstract]2024 Oct 7;14(1):83. PMID: 39375333 -
Stem Cells Int
Endothelial Cells Promote Migration of Mesenchymal Stem Cells via PDGF-BB/PDGFR β-Src-Akt in the Context of Inflammatory Microenvironment upon Bone Defect. [Abstract]2022 Sep 24:2022:2401693. PMID: 36193255
Solvent & Solubility
DMSO : 6 mg/mL (19.33 mM; Need ultrasonic and warming; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 0.77 mg/mL (2.48 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 0.77 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (7.7 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (276 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.2222 mL | 16.1108 mL | 32.2217 mL | 80.5542 mL |
| 5 mM | 0.6444 mL | 3.2222 mL | 6.4443 mL | 16.1108 mL | |
| 10 mM | 0.3222 mL | 1.6111 mL | 3.2222 mL | 8.0554 mL | |
| 15 mM | 0.2148 mL | 1.0741 mL | 2.1481 mL | 5.3703 mL |