BAN ORL 24
Based on 1 publication(s) in Google Scholar
BAN ORL 24 is a nociceptin/orphanin FQ (N/OFQ) peptide receptor (NOP) antagonist. BAN ORL 24 has antagonistic effect for nociceptin (NOP) receptor with KI value of 0.24 nM in CHO cell. BAN ORL 24 can be used for the research of cancer and analgesic.
For research use only. We do not sell to patients.
- Purity: 99.68%
- CAS No.: 1401463-54-4
- Formula: C27H37Cl2N3O2
- Molecular Weight:506.51
-
Storage:
-20°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
Publications Citing Use of MedChemExpress (MCE) BAN ORL 24
MoreAll Opioid Receptor Isoforms
More
Biological Activity
|
NOP Receptor/ORL1 |
BAN ORL 24 has antagonist for NOR and MOR (opioid receptor subtype) with IC50 values of 50 μM and 0.224 μM, respectively[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:C57BL/6 mice[3]
-
Dosage:10 mg/kg
-
Administration:10 mg/kg; i.v.
-
Result:Caused inhibition of BPRIM97-induced antinociception at 90-min postinjection.
Did not attenuate BPR1M97-induced antinociception in the tail-clip test after 30 min.
Chemical Information
-
CAS No. 1401463-54-4
-
Appearance Solid
-
Molecular Weight 506.51
-
Formula C27H37Cl2N3O2
-
Color White to off-white
-
SMILES
O=C([C@@H]1N(CC2=CC=CC=C2)CCC1)NCCCN3CCC4(CC3)OCC5=C4C=CC=C5.[H]Cl.[H]Cl
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
-20°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Neurotherapeutics
LY2940094, an NOPR antagonist, promotes oligodendrocyte generation and myelin recovery in an NOPR independent manner. [Abstract]2024 Jul 13:e00424. PMID: 39004556
Solvent & Solubility
DMSO : ≥ 150 mg/mL (296.14 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 100 mg/mL (197.43 mM; Need ultrasonic)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (9.87 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5 mg/mL (9.87 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 100 mg/mL (197.43 mM); Clear solution; Need ultrasonic
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Purity & Documentation
-
Data Sheet (278 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
[1]. Fischetti et al (2009) Pharmacological characterization of the nociceptin/orphanin FQ receptor non peptide antagonist compound 24. Eur.J.Pharmacol. 614 50. [Content Brief]
[2]. Tao Hou, et al. Label-free cell phenotypic study of opioid receptors and discovery of novel mu opioid ligands from natural products. J Ethnopharmacol [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 1.9743 mL | 9.8715 mL | 19.7429 mL | 49.3574 mL |
| 5 mM | 0.3949 mL | 1.9743 mL | 3.9486 mL | 9.8715 mL | |
| 10 mM | 0.1974 mL | 0.9871 mL | 1.9743 mL | 4.9357 mL | |
| 15 mM | 0.1316 mL | 0.6581 mL | 1.3162 mL | 3.2905 mL | |
| 20 mM | 0.0987 mL | 0.4936 mL | 0.9871 mL | 2.4679 mL | |
| 25 mM | 0.0790 mL | 0.3949 mL | 0.7897 mL | 1.9743 mL | |
| 30 mM | 0.0658 mL | 0.3290 mL | 0.6581 mL | 1.6452 mL | |
| 40 mM | 0.0494 mL | 0.2468 mL | 0.4936 mL | 1.2339 mL | |
| 50 mM | 0.0395 mL | 0.1974 mL | 0.3949 mL | 0.9871 mL | |
| 60 mM | 0.0329 mL | 0.1645 mL | 0.3290 mL | 0.8226 mL | |
| 80 mM | 0.0247 mL | 0.1234 mL | 0.2468 mL | 0.6170 mL | |
| 100 mM | 0.0197 mL | 0.0987 mL | 0.1974 mL | 0.4936 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.