Sulfobetaine-12
Based on 1 Customer Validation
Sulfobetaine-12is a zwitterionic surfactant, which means it has both positive and negative charges in its molecules. It is used as a detergent in various industries, including pharmaceuticals, cosmetics, and personal care products. Sulfobetaine-12Often used as a mild surfactant due to its non-irritating properties and ability to stabilize emulsions. Plus, it has antistatic properties that can be used to clean electronics and other static-prone surfaces.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.91%
- CAS No.: 14933-08-5
- Formule: C17H37NO3S
- Masse moléculaire:335.55
-
Stockage:
4°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
-
Help & FAQs
-
HY-W127621
Sulfobetaine-8
-
HY-W099575
Sulfobetaine-16
-
HY-Y1891
Tween 80
-
HY-141415
Tween 20
-
HY-W099581
Sulfobetaine-14
-
HY-125920
Lauroylsarcosine sodium
-
HY-W115819
Polysorbate 40
-
HY-126377
Sulfobetaine 10
-
HY-W099581R
Sulfobetaine-14 (Standard)
-
HY-B0942
Benzethonium chloride
-
HY-N1446C
Sorbitan monooleate
-
HY-W115818
Polyoxyethylene Sorbitan Monostearate
Activité biologique
Sulfobetaine-12 is a biochemical reagent that can be used as a biological material or organic compound for life science related research.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 14933-08-5
-
Appearance Solid
-
Masse moléculaire 335.55
-
Formule C17H37NO3S
-
Color White to off-white
-
SMILES
CCCCCCCCCCCC[N+](C)(C)CCCS(=O)(=O)[O-]
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
Solvant et solubilité
H2O : 50 mg/mL (149.01 mM; ultrasonic and warming and heat to 60°C)
DMSO : 50 mg/mL (149.01 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (7.45 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (7.45 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Pureté et documentation
-
Fiche technique (241 KB)
-
SDS (394 KB)
- English - EN (394 KB)
- Français - FR (394 KB)
- Deutsch - DE (394 KB)
- Norwegian - NO (394 KB)
- Español - ES (394 KB)
- Swedish - SV (394 KB)
- Italian - IT (394 KB)
- Korean - KR (394 KB)
- Portuguese - PT (394 KB)
-
Instruction de manipulation (2659 KB)
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 2.9802 mL | 14.9009 mL | 29.8018 mL | 74.5045 mL |
| 5 mM | 0.5960 mL | 2.9802 mL | 5.9604 mL | 14.9009 mL | |
| 10 mM | 0.2980 mL | 1.4901 mL | 2.9802 mL | 7.4505 mL | |
| 15 mM | 0.1987 mL | 0.9934 mL | 1.9868 mL | 4.9670 mL | |
| 20 mM | 0.1490 mL | 0.7450 mL | 1.4901 mL | 3.7252 mL | |
| 25 mM | 0.1192 mL | 0.5960 mL | 1.1921 mL | 2.9802 mL | |
| 30 mM | 0.0993 mL | 0.4967 mL | 0.9934 mL | 2.4835 mL | |
| 40 mM | 0.0745 mL | 0.3725 mL | 0.7450 mL | 1.8626 mL | |
| 50 mM | 0.0596 mL | 0.2980 mL | 0.5960 mL | 1.4901 mL | |
| 60 mM | 0.0497 mL | 0.2483 mL | 0.4967 mL | 1.2417 mL | |
| 80 mM | 0.0373 mL | 0.1863 mL | 0.3725 mL | 0.9313 mL | |
| 100 mM | 0.0298 mL | 0.1490 mL | 0.2980 mL | 0.7450 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Sulfobetaine-12 Related Classifications
HY-W127620 Related Classifications
Powered by Bioz