Isocorydine
Based on 1 Customer Validation
Isocorydine is isolated from Dicranostigma leptopodum (Maxim.) Fedde (DLF). Isocorydine combines with Doxorubicin (DOX) has a promising potential to eradicate hepatocellular carcinoma (HCC).
商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。
- 純度: 99.95%
- CAS 番号: 475-67-2
- 分子式: C20H23NO4
- 分子量:341.40
-
保管条件:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Endogenous Metabolite アイソフォーム固有の製品をすべて表示
More
生物活性
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HeLa | IC50 |
>200 μM
Compound: 1
|
Antiproliferative activity against human HeLa cells after 48 hrs by MTT assay
Antiproliferative activity against human HeLa cells after 48 hrs by MTT assay
|
[PMID: 29103873] |
| HepG2 | IC50 |
>200 μM
Compound: 1
|
Antiproliferative activity against human HepG2 cells after 48 hrs by MTT assay
Antiproliferative activity against human HepG2 cells after 48 hrs by MTT assay
|
[PMID: 29103873] |
| KB | IC50 |
>733 μM
Compound: Isocorydine
|
Cytotoxicity against human KB cells after 72 hrs
Cytotoxicity against human KB cells after 72 hrs
|
[PMID: 11141105] |
| MGC-803 | IC50 |
>200 μM
Compound: 1
|
Antiproliferative activity against human MGC803 cells after 48 hrs by MTT assay
Antiproliferative activity against human MGC803 cells after 48 hrs by MTT assay
|
[PMID: 29103873] |
Isocorydine (0-400 ug/ml; 48 hours) show a significant decrease in the IC50 for ICD and DOX, the CI values are 0.605, 0.644, 0.804, and 0.707 respectively for Huh-7, Hep-G2, SNU-449 and SNU-387[1]. Isocorydine (0-400 ug/ml; 48 hours) abrogates DOX-induced upregulation of mesenchymal markers and the downregulation of epithelial markers in human HCC cell lines[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:Huh-7, Hep-G2 , SNU-387, SNU-449 cells
-
Concentration:0-400 ug/ml
-
Incubation Time:24 hours
-
Result:Had a higher cytotoxicity in HCC cells in comparison to ICD or DOX alone.
-
Cell Line:Huh-7, Hep-G2 , SNU-387, SNU-449 cells
-
Concentration:
-
Incubation Time:24 hours
-
Result:Downregulated protein levels of Claundin-1 and E-cadherin.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Female nude mice[1]
-
Dosage:0.4 mg/ml
-
Administration:Injected intraperitoneally every 2 days for 2 weeks
-
Result:Combined treatment of isocorydine and DOX showed a promising potential to eradicate HCC.
化学情報
-
CAS 番号 475-67-2
-
性状 Solid
-
分子量 341.40
-
分子式 C20H23NO4
-
Color White to off-white
-
SMILES
COC1=C2C3=C(C=C1OC)CCN(C)[C@@]3([H])CC4=CC=C(OC)C(O)=C24
-
Structure Classification
-
Initial Source
-
輸送条件
Room temperature in continental US; may vary elsewhere.
-
保管条件
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
溶剤 & 溶解度
DMSO : 20 mg/mL (58.58 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (7.32 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2 mg/mL (5.86 mM); Clear solution
This protocol yields a clear solution of ≥ 2 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
純度とドキュメンテーション
-
データシート (278 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
取扱説明書 (2659 KB)
参考文献
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.9291 mL | 14.6456 mL | 29.2912 mL | 73.2279 mL |
| 5 mM | 0.5858 mL | 2.9291 mL | 5.8582 mL | 14.6456 mL | |
| 10 mM | 0.2929 mL | 1.4646 mL | 2.9291 mL | 7.3228 mL | |
| 15 mM | 0.1953 mL | 0.9764 mL | 1.9527 mL | 4.8819 mL | |
| 20 mM | 0.1465 mL | 0.7323 mL | 1.4646 mL | 3.6614 mL | |
| 25 mM | 0.1172 mL | 0.5858 mL | 1.1716 mL | 2.9291 mL | |
| 30 mM | 0.0976 mL | 0.4882 mL | 0.9764 mL | 2.4409 mL | |
| 40 mM | 0.0732 mL | 0.3661 mL | 0.7323 mL | 1.8307 mL | |
| 50 mM | 0.0586 mL | 0.2929 mL | 0.5858 mL | 1.4646 mL |