Leachianone A
Based on 1 Customer Validation
Leachianone A, isolated from Radix Sophorae, has anti-malarial, anti-inflammatory, and cytotoxic potent. Leachianone A induces apoptosis involved both extrinsic and intrinsic pathways.
For research use only. We do not sell to patients.
- Purity: 99.44%
- CAS No.: 97938-31-3
- Formula: C26H30O6
- Molecular Weight:438.51
-
Storage:
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Biological Activity
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HL-60 | IC50 |
11.3 μM
Compound: 4
|
Cytotoxicity against human HL60 cells after 96 hrs by MTT assay
Cytotoxicity against human HL60 cells after 96 hrs by MTT assay
|
[PMID: 10843587] |
| RAW264.7 | IC50 |
11.3 μM
Compound: 13
|
Antiinflammatory activity in mouse RAW264.7 cells assessed as inhibition of LPS-stimulated nitric oxide production after 24 hrs by Griess method
Antiinflammatory activity in mouse RAW264.7 cells assessed as inhibition of LPS-stimulated nitric oxide production after 24 hrs by Griess method
|
[PMID: 26073007] |
Leachianone A (0-20 μg/ml; 24-72 hours) exhibits a marked inhibition on the survival of HepG2 cells time- and dose-dependently manner, IC50 values are 6.9 μg/ml, 3.4 μg/ml and 2.8 μg/ml in cells with 24-, 48- and 72-hours treatment, respectively[1]. Leachianone A (10-30 μg/ml; 48 hours) indicates that at low concentration of LA (10 μg/ml), a substantial amount of cells is primarily in the early phase of apoptosis, at higher concentrations, induces a shift of the cell population to late apoptotic/ necrotic stage[1]. Leachianone A (10-30 μg/ml; 48 hours) decreases the precursor of caspase-3 in a dose-dependent manner, reduces the protein level of the pro-forms of upstream initiator caspases, caspases-8 and -9, decreases two downstream substrates, namely inhibitor of caspase-activated DNase(ICAD) and poly-ADP-ribose polymerase (PARP) in HepG2 cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:HepG2 cells
-
Concentration:0 μg/ml, 2 μg/ml, 4 μg/ml, 6 μg/ml, 8 μg/ml, 10 μg/ml, 12 μg/ml, 14 μg/ml, 16 μg/ml, 18 μg/ml, 20 μg/ml
-
Incubation Time:24-72 hours
-
Result:Inhibited HepG2 cells survival.
-
Cell Line:HepG2 cells
-
Concentration:48 hours
-
Incubation Time:10, 20, and 30 μg/ml
-
Result:Induced the proportion of annexin V-stained cells in both the early and late apoptotic stage.
-
Cell Line:HepG2 cells
-
Concentration:48 hours
-
Incubation Time:10, 20, and 30 μg/ml
-
Result:Decreased the protein expression of caspase-3, caspases-8 and -9, reduced ICAD and PARP protein expression.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Male nude mice with human hepatoma HepG2 cells[1]
-
Dosage:20 mg/kg; 30 mg/kg
-
Administration:Intravenously injection; 20 mg/kg, 30 mg/kg; once daily; 30 days
-
Result:Suppressed the tumor growth in vivo.
Chemical Information
-
CAS No. 97938-31-3
-
Appearance Solid
-
Molecular Weight 438.51
-
Formula C26H30O6
-
Color Off-white to light yellow
-
SMILES
O=C1C[C@@H](C2=CC=C(O)C=C2OC)OC3=C(C[C@H](C(C)=C)C/C=C(C)\C)C(O)=CC(O)=C13
-
Structure Classification
-
Initial Source
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Solvent & Solubility
DMSO : 100 mg/mL (228.04 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (278 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
[1]. Jeong GS, et al. Lavandulyl flavanones from Sophora flavescens protect mouse hippocampal cells against glutamate-induced neurotoxicity via the induction of heme oxygenase-1. Biol Pharm Bull. 2008 Oct;31(10):1964-7. [Content Brief]
[2]. Cheung CS, et al. Leachianone A as a potential anti-cancer drug by induction of apoptosis in human hepatoma HepG2 cells. Cancer Lett. 2007 Aug 18;253(2):224-35. Epub 2007 Mar 26. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.2804 mL | 11.4022 mL | 22.8045 mL | 57.0112 mL |
| 5 mM | 0.4561 mL | 2.2804 mL | 4.5609 mL | 11.4022 mL | |
| 10 mM | 0.2280 mL | 1.1402 mL | 2.2804 mL | 5.7011 mL | |
| 15 mM | 0.1520 mL | 0.7601 mL | 1.5203 mL | 3.8007 mL | |
| 20 mM | 0.1140 mL | 0.5701 mL | 1.1402 mL | 2.8506 mL | |
| 25 mM | 0.0912 mL | 0.4561 mL | 0.9122 mL | 2.2804 mL | |
| 30 mM | 0.0760 mL | 0.3801 mL | 0.7601 mL | 1.9004 mL | |
| 40 mM | 0.0570 mL | 0.2851 mL | 0.5701 mL | 1.4253 mL | |
| 50 mM | 0.0456 mL | 0.2280 mL | 0.4561 mL | 1.1402 mL | |
| 60 mM | 0.0380 mL | 0.1900 mL | 0.3801 mL | 0.9502 mL | |
| 80 mM | 0.0285 mL | 0.1425 mL | 0.2851 mL | 0.7126 mL | |
| 100 mM | 0.0228 mL | 0.1140 mL | 0.2280 mL | 0.5701 mL |