RF9 hydrochloride
Based on 1 Customer Validation
RF9 hydrochloride is a potent and selective Neuropeptide FF receptor antagonist, with Ki values of 58 and 75 nM for hNPFF1R and hNPFF2R, respectively.
For research use only. We do not sell to patients.
- Purity: 99.91%
- Formula: C26H39ClN6O3
- Molecular Weight:519.08
-
Storage:
-20°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
GPCR/G Protein Compound Library
HY-L006
-
Neuronal Signaling Compound Library
HY-L013
-
Anti-Cardiovascular Disease Compound Library
HY-L046
-
Endocrinology Compound Library
HY-L047
-
Neurotransmitter Receptor Compound Library
HY-L062
-
Anti-Obesity Compound Library
HY-L087
-
Membrane Protein-targeted Compound Library
HY-L149
-
Membrane Receptor-targeted Compound Library
HY-L150
-
Highly Selective Inhibitors Library
HY-L158
-
Multi-Target Compound Library
HY-L176
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Lactylation Compound Library
HY-L249
All Neuropeptide Y Receptor Isoforms
More
Biological Activity
|
hNPFF1R 58 nM (Ki) |
hNPFF2R 75 nM (Ki) |
RF9 (10 μM) pretrement completely blocks NPFF induced neurite outgrowth of Neuro 2A cells[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
RF9 (10 μg) infused alone does not result in a significant alteration of MAP or heart rate. Conversely, MAP and heart rate increases evoked by NPFF are significantly blocked when NPFF is applied in conjunction with RF9[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Rats[1]
-
Dosage:0.1 mg/kg.
-
Administration:S.C. 30 min before 0.3 mg/kg heroin or saline on basal nociceptive threshold in rats.
-
Result:Opposed to delaye heroin-induced hyperalgesia and associated tolerance.
Chemical Information
-
Appearance Solid
-
Molecular Weight 519.08
-
Formula C26H39ClN6O3
-
Color White to off-white
-
SMILES
NC(C(CC1=CC=CC=C1)NC([C@H](CCCNC(N)=N)NC(C23C[C@H](C4)CC(C[C@@H]4C3)C2)=O)=O)=O.Cl
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
-20°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvent & Solubility
DMSO : 50 mg/mL (96.32 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (4.01 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (4.01 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (277 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
[1]. Simonin F, et al. RF9, a potent and selective neuropeptide FF receptor antagonist, prevents opioid-induced tolerance associated with hyperalgesia. Proc Natl Acad Sci U S A. 2006 Jan 10;103(2):466-71. [Content Brief]
[2]. Ting Zhang, et al. Discovery of Two Novel Branched Peptidomimetics Containing endomorphin-2 and RF9 Pharmacophores: Synthesis and Neuropharmacological Evaluation. Bioorg Med Chem. 2019 Feb 15;27(4):630-643. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.9265 mL | 9.6324 mL | 19.2649 mL | 48.1621 mL |
| 5 mM | 0.3853 mL | 1.9265 mL | 3.8530 mL | 9.6324 mL | |
| 10 mM | 0.1926 mL | 0.9632 mL | 1.9265 mL | 4.8162 mL | |
| 15 mM | 0.1284 mL | 0.6422 mL | 1.2843 mL | 3.2108 mL | |
| 20 mM | 0.0963 mL | 0.4816 mL | 0.9632 mL | 2.4081 mL | |
| 25 mM | 0.0771 mL | 0.3853 mL | 0.7706 mL | 1.9265 mL | |
| 30 mM | 0.0642 mL | 0.3211 mL | 0.6422 mL | 1.6054 mL | |
| 40 mM | 0.0482 mL | 0.2408 mL | 0.4816 mL | 1.2041 mL | |
| 50 mM | 0.0385 mL | 0.1926 mL | 0.3853 mL | 0.9632 mL | |
| 60 mM | 0.0321 mL | 0.1605 mL | 0.3211 mL | 0.8027 mL | |
| 80 mM | 0.0241 mL | 0.1204 mL | 0.2408 mL | 0.6020 mL |
RF9 hydrochloride Related Classifications
HY-107382A Related Classifications
Powered by Bioz