Patamostat
Based on 1 Customer Validation
Patamostat (E-3123) is a potent protease inhibitor. Patamostat potently inhibits trypsin, plasmin and thrombin with IC50s of 39 nM, 950 nM and 1.9 μM, respectively. Patamostat may possess suppressing effects on pathogenesis and development of acute pancreatitis.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.13%
- CAS No.: 114568-26-2
- Formule: C20H20N4O4S
- Masse moléculaire:412.46
-
Stockage:
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
Targeted Diversity Library
HY-L099
-
Human Metabolite Library
HY-L123
-
Coagulation and Anti-coagulation Compound Library
HY-L136
-
Heterocyclic Compound Library
HY-L138
-
Protease Inhibitor Library
HY-L147
-
Serine/Threonine Kinase Inhibitor Library
HY-L164
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
Protein Kinase Compound Library
HY-L196
-
High-Throughput Bioactive Compound Library
HY-L205
-
Mass Spectrometry Human Metabolite Library
HY-L215
-
Immunology/Inflammation Compound Library
HY-L007
-
Metabolism/Protease Compound Library
HY-L012
Activité biologique
IC50: 39 nM (trypsin), 950 nM (plasmin) and 1.9 μM (thrombin)[1]
Patamostat (1.0-3.0 mg/kg; intravenous infusion) reduces the increases of serum trypsin and lipase activities in dogs with pancreatitis[1].
Patamostat (2 mg/kg per h; continuous infusion) improves almost all parameters, including mortality rate, serum and ascitic fluid amylase levels, plasma endotoxin and serum FDP levels, and distribution of lysosomal enzyme in male Wistar rats[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Male Wistar rats weighing about 350 g[2]
-
Dosage:2 mg/kg
-
Administration:Continuous infusion per h for 1 h
-
Result:Significantly improved the survival rate.
Chemical Information
-
CAS No. 114568-26-2
-
Appearance Solid
-
Masse moléculaire 412.46
-
Formule C20H20N4O4S
-
Color White to off-white
-
SMILES
O=C(OC1=CC=C(SCCN2C(CCC2=O)=O)C=C1)C3=CC=C(NC(N)=N)C=C3
-
Synonyms
E-3123
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Solvant et solubilité
DMSO : 100 mg/mL (242.45 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.06 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.06 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (271 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. K Miyamoto, et al. [Effects of E-3123, a New Protease Inhibitor, on Several Protease Activities and on Experimental Acute Pancreatitis]. Nihon Yakurigaku Zasshi. 1988 May;91(5):285-93. [Content Brief]
[2]. T Hirano, et al. Protective Effect of a Cephalosporin, Shiomarin, Plus a New Potent Protease Inhibitor, E3123, on Rat Taurocholate-Induced Pancreatitis. J Gastroenterol Hepatol. Jan-Feb 1993;8(1):52-9. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.4245 mL | 12.1224 mL | 24.2448 mL | 60.6119 mL |
| 5 mM | 0.4849 mL | 2.4245 mL | 4.8490 mL | 12.1224 mL | |
| 10 mM | 0.2424 mL | 1.2122 mL | 2.4245 mL | 6.0612 mL | |
| 15 mM | 0.1616 mL | 0.8082 mL | 1.6163 mL | 4.0408 mL | |
| 20 mM | 0.1212 mL | 0.6061 mL | 1.2122 mL | 3.0306 mL | |
| 25 mM | 0.0970 mL | 0.4849 mL | 0.9698 mL | 2.4245 mL | |
| 30 mM | 0.0808 mL | 0.4041 mL | 0.8082 mL | 2.0204 mL | |
| 40 mM | 0.0606 mL | 0.3031 mL | 0.6061 mL | 1.5153 mL | |
| 50 mM | 0.0485 mL | 0.2424 mL | 0.4849 mL | 1.2122 mL | |
| 60 mM | 0.0404 mL | 0.2020 mL | 0.4041 mL | 1.0102 mL | |
| 80 mM | 0.0303 mL | 0.1515 mL | 0.3031 mL | 0.7576 mL | |
| 100 mM | 0.0242 mL | 0.1212 mL | 0.2424 mL | 0.6061 mL |
Patamostat Related Classifications
HY-114080 Related Classifications
Powered by Bioz