IMB-XH1
Based on 1 Customer Validation
IMB-XH1 is an inhibitor of myeloid cell factor 1 (Mcl-1). IMB-XH1 is a non-competitive Delhi metallo-β-lactamase (NDM-1) inhibitor. The IC50s of IMB-XH1 against metallo-β-lactamases NDM-1, IMP-4, ImiS and L1 are 0.4637 μM, 3.980 μM, 0.2287 μM and 1.158 μM, respectively.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.0%
- CAS No.: 292057-76-2
- Formule: C19H15N3OS
- Masse moléculaire:333.41
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
Anti-Infection Compound Library
HY-L002
-
Apoptosis Compound Library
HY-L003
-
Anti-Cancer Compound Library
HY-L025
-
Antibacterial Compound Library
HY-L049
-
Anti-Blood Cancer Compound Library
HY-L079
-
Mitochondria-Targeted Compound Library
HY-L089
-
Heterocyclic Compound Library
HY-L138
-
Highly Selective Inhibitors Library
HY-L158
-
Anti-Hematopathy Compound Library
HY-L171
-
Anti-Ovarian Cancer Compound Library
HY-L173
-
Mitophagy Compound Library
HY-L180
-
Bioactive Compound Library Max
HY-L181
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
Voir tous les produits spécifiques à Isoform Beta-lactamase
More
Activité biologique
|
Mcl-1 |
IMB-XH1 (Compound 2) is a Mcl-1 inhibitor[1]. IMB-XH is screened out with the IC50 value of 0.4637 μM at the concentration of 20 μg/mL. IMB-XH1 (20 μg/mL) can increase the sensitivity of E. coli BL21 (DE3) (pET-30a(+)-NDM-1) to ampicillinby more than 8 times. IMB-XHI may have a broad spectrum of metallo-β-lactamases (MBLs) inhibitory activity. The combination of IMB-XH1 and Meropenem (MEM) may have potentials to treat infections caused by metallo-β-lactamases-positive, carbapenem-resistant Gram-negative pathogens[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 292057-76-2
-
Appearance Solid
-
Masse moléculaire 333.41
-
Formule C19H15N3OS
-
Color White to yellow
-
SMILES
OC1=C(N=CC=C2)C2=CC=C1C(NC3=CC=CC=N3)C4=CC=CS4
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Solvant et solubilité
DMSO : 33.33 mg/mL (99.97 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 2.08 mg/mL (6.24 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.08 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (6.24 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (278 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.9993 mL | 14.9966 mL | 29.9931 mL | 74.9828 mL |
| 5 mM | 0.5999 mL | 2.9993 mL | 5.9986 mL | 14.9966 mL | |
| 10 mM | 0.2999 mL | 1.4997 mL | 2.9993 mL | 7.4983 mL | |
| 15 mM | 0.2000 mL | 0.9998 mL | 1.9995 mL | 4.9989 mL | |
| 20 mM | 0.1500 mL | 0.7498 mL | 1.4997 mL | 3.7491 mL | |
| 25 mM | 0.1200 mL | 0.5999 mL | 1.1997 mL | 2.9993 mL | |
| 30 mM | 0.1000 mL | 0.4999 mL | 0.9998 mL | 2.4994 mL | |
| 40 mM | 0.0750 mL | 0.3749 mL | 0.7498 mL | 1.8746 mL | |
| 50 mM | 0.0600 mL | 0.2999 mL | 0.5999 mL | 1.4997 mL | |
| 60 mM | 0.0500 mL | 0.2499 mL | 0.4999 mL | 1.2497 mL | |
| 80 mM | 0.0375 mL | 0.1875 mL | 0.3749 mL | 0.9373 mL |
Powered by Bioz