Cenerimod
Based on 1 Customer Validation
Cenerimod (ACT-334441) is a potent, selective and orally active S1P1 receptor modulator, with an EC50 of 1 nM. Cenerimod shows more than 36 fold selctivity for hS1P1 over hS1P2, hS1P3, hS1P4, and hS1P5 receptor subtypes (EC50s=>10000, 228, 2134, and 36 nM, respectively). Cenerimod can attenuate murine experimental autoimmune encephalomyelitis (EAE) and murine sclerodermatous.
For research use only. We do not sell to patients.
- Purity: 99.43%
- CAS No.: 1262414-04-9
- Formula: C25H31N3O5
- Molecular Weight:453.53
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
Orally Active Compound Library
HY-L061
-
Targeted Diversity Library
HY-L099
-
Rare Diseases Drug Library
HY-L102
-
Heterocyclic Compound Library
HY-L138
-
Membrane Protein-targeted Compound Library
HY-L149
-
Membrane Receptor-targeted Compound Library
HY-L150
-
Highly Selective Activators Library
HY-L159
-
Multi-Target Compound Library
HY-L176
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Drug Repurposing Compound Library Plus
HY-L035P
-
Clinical Compound Library Plus
HY-L026P
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Lactylation Compound Library
HY-L249
-
GPCR/G Protein Compound Library
HY-L006
-
Immunology/Inflammation Compound Library
HY-L007
-
Clinical Compound Library
HY-L026
-
Drug Repurposing Compound Library
HY-L035
Biological Activity
|
S1PR1 1 nM (EC50) |
S1PR5 36 nM (EC50) |
S1PR5 228 nM (EC50) |
S1PR4 2134 nM (EC50) |
Cenerimod is a highly potent S1P1 receptor agonists in (35S)-GTPγS assays using HUVEC cell membrane preparations, with an EC50 of 2 nM[1].
Cenerimod activates G protein and increases Ca2+ signaling in CHO cells, with EC50s of 1 nM and 124 nM, respectively[1].
Cenerimod (5 μM; 24 h) inhibits collagen production in fibroblasts[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Cenerimod (6 mg/kg/day for 30 days; p.o.) attenuates disease in a mouse experimental autoimmune encephalitis (EAE) model[1].
Cenerimod (10 mg/kg/day for 42 days; p.o.) attenuates skin and lung fibrosis in Scl-cGVHD mice[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Male Wistar rats weighing 294-510 g[1]
-
Dosage:0.1, 0.3, 1, 3 and 10 mg/kg
-
Administration:A single p.o.
-
Result:Effectively and reversibly reduced the blood lymphocyte counts, with a plateau reached after a single oral dose of 1 mg/kg.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 1262414-04-9
-
Appearance Solid
-
Molecular Weight 453.53
-
Formula C25H31N3O5
-
Color White to yellow
-
SMILES
OC[C@H](O)COC1=C(C)C=C(C2=NOC(C3=CC(C4CCCC4)=NC(OC)=C3)=N2)C=C1CC
-
Synonyms
ACT-334441
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 100 mg/mL (220.49 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.51 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (273 KB)
-
SDS (584 KB)
- English - EN (584 KB)
- Français - FR (584 KB)
- Deutsch - DE (584 KB)
- Norwegian - NO (584 KB)
- Español - ES (584 KB)
- Swedish - SV (584 KB)
- Italian - IT (584 KB)
- Korean - KR (584 KB)
- Portuguese - PT (584 KB)
-
Handling Instructions (2659 KB)
References
[1]. Piali L, et, al. Cenerimod, a novel selective S1P 1 receptor modulator with unique signaling properties. Pharmacol Res Perspect. 2017 Dec;5(6):e00370. [Content Brief]
[2]. Kano M, et, al. Attenuation of murine sclerodermatous models by the selective S1P 1 receptor modulator cenerimod. Sci Rep. 2019 Jan 24;9(1):658. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.2049 mL | 11.0246 mL | 22.0493 mL | 55.1231 mL |
| 5 mM | 0.4410 mL | 2.2049 mL | 4.4099 mL | 11.0246 mL | |
| 10 mM | 0.2205 mL | 1.1025 mL | 2.2049 mL | 5.5123 mL | |
| 15 mM | 0.1470 mL | 0.7350 mL | 1.4700 mL | 3.6749 mL | |
| 20 mM | 0.1102 mL | 0.5512 mL | 1.1025 mL | 2.7562 mL | |
| 25 mM | 0.0882 mL | 0.4410 mL | 0.8820 mL | 2.2049 mL | |
| 30 mM | 0.0735 mL | 0.3675 mL | 0.7350 mL | 1.8374 mL | |
| 40 mM | 0.0551 mL | 0.2756 mL | 0.5512 mL | 1.3781 mL | |
| 50 mM | 0.0441 mL | 0.2205 mL | 0.4410 mL | 1.1025 mL | |
| 60 mM | 0.0367 mL | 0.1837 mL | 0.3675 mL | 0.9187 mL | |
| 80 mM | 0.0276 mL | 0.1378 mL | 0.2756 mL | 0.6890 mL | |
| 100 mM | 0.0220 mL | 0.1102 mL | 0.2205 mL | 0.5512 mL |
Cenerimod Related Classifications
HY-17606 Related Classifications
Powered by Bioz