ML-9
Based on 6 publication(s) in Google Scholar
ML-9 is a selective and potent inhibitor of Akt kinase, inhibits myosin light-chain kinase (MLCK) and stromal interaction molecule 1 (STIM1) activity. ML-9 inhibits inhibits MLCK, PKA and PKC activity with Ki values of 4, 32 and 54 μM, respectively. ML-9 induces autophagy by stimulating autophagosome formation and inhibiting their degradation.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 99.86%
- No. CAS: 105637-50-1
- Fòrmula: C15H18Cl2N2O2S
- Peso molecular:361.29
-
Almacenamiento:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
-
Anti-Cancer Compound Library
HY-L025
-
Cytoskeleton Compound Library
HY-L060
-
Mechanoreceptors Compound Library
HY-L095
-
Highly Selective Inhibitors Library
HY-L158
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
Protein Kinase Compound Library
HY-L196
-
High-Throughput Bioactive Compound Library
HY-L205
Publications Citing Use of MedChemExpress (MCE) ML-9
More
Actividad biológica
ML9 (0-100 μM; 0-24 hours) has no reduction in cardiomyocyte viability, 50-100 μM significantly induces cell death[2]. ML9 (50 μM; 1-4 hours) significantly increases cleaved caspase-3 levels, decreased STIM1 protein levels by about 42%[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:Neonatal rat ventricular myocytes (NRVM) cells
-
Concentration:0, 10, 50 and 100 μM
-
Incubation Time:0, 1, 4, 8 and 24 hours
-
Result:Decreased cell viability at 50-100 μM concentration.
-
Cell Line:Neonatal rat ventricular myocytes (NRVM) cells
-
Concentration:50 μM
-
Incubation Time:1, 4 and 8 hours
-
Result:Induced cardiomyocyte death through necrosis and apoptosis.
Chemical Information
-
No. CAS 105637-50-1
-
Appearance Solid
-
Peso molecular 361.29
-
Fòrmula C15H18Cl2N2O2S
-
Color Off-white to light yellow
-
SMILES
O=S(N1CCNCCC1)(C2=C3C=CC=C(Cl)C3=CC=C2)=O.[H]Cl
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (6)
-
Journal Impact Factor
-
Most Recent
-
Eur J Pharmacol
Novel mechanisms of metformin-induced vasorelaxation of mesenteric arterioles via endothelium-dependent hyperpolarization to treat murine colitis. [Abstract]2025 Sep 15:1003:177900. PMID: 40617384 -
Cell Calcium
Drug repurposing DMSO from an old solvent to a new candidate for the treatment of colitis and sepsis in male mice. [Abstract]2026 May 23:136:103155. PMID: 42235215 -
Cell Calcium
High-throughput assessment identifying major platelet Ca2+ entry pathways via tyrosine kinase-linked and G protein-coupled receptors. [Abstract]2023 Jun:112:102738. PMID: 37060673 -
Life Sci Alliance
JAK inhibition with tofacitinib rapidly increases contractile force in human skeletal muscle. [Abstract]2024 Aug 9;7(11):e202402885. PMID: 39122555 -
Heliyon
N,N,N',N'-Tetrakis(2-pyridylmethyl)ethylenediamine induces endothelium-dependent hyperpolarization-mediated vasorelaxation via store-operated calcium entry mechanism in healthy and intestinal inflammatory mice. [Abstract]2024 Jul 6;10(14):e33994. PMID: 39108891 -
Solvente y solubilidad
DMSO : 83.33 mg/mL (230.65 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : ≥ 5 mg/mL (13.84 mM)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (5.76 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (5.76 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (277 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
[1]. Ito S, et al. ML-9, a myosin light chain kinase inhibitor, reduces intracellular Ca2+ concentration in guinea pig trachealis.Eur J Pharmacol. 2004 Feb 23;486(3):325-33. [Content Brief]
[2]. Shaikh S, et al. The STIM1 inhibitor ML9 disrupts basal autophagy in cardiomyocytes by decreasing lysosome content.Toxicol In Vitro. 2018 Apr;48:121-127. [Content Brief]
[3]. Kondratskyi A1, et al.Identification of ML-9 as a lysosomotropic agent targeting autophagy and cell death.Cell Death Dis. 2014 Apr 24;5:e1193. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 2.7679 mL | 13.8393 mL | 27.6786 mL | 69.1965 mL |
| 5 mM | 0.5536 mL | 2.7679 mL | 5.5357 mL | 13.8393 mL | |
| 10 mM | 0.2768 mL | 1.3839 mL | 2.7679 mL | 6.9196 mL | |
| DMSO | 15 mM | 0.1845 mL | 0.9226 mL | 1.8452 mL | 4.6131 mL |
| 20 mM | 0.1384 mL | 0.6920 mL | 1.3839 mL | 3.4598 mL | |
| 25 mM | 0.1107 mL | 0.5536 mL | 1.1071 mL | 2.7679 mL | |
| 30 mM | 0.0923 mL | 0.4613 mL | 0.9226 mL | 2.3065 mL | |
| 40 mM | 0.0692 mL | 0.3460 mL | 0.6920 mL | 1.7299 mL | |
| 50 mM | 0.0554 mL | 0.2768 mL | 0.5536 mL | 1.3839 mL | |
| 60 mM | 0.0461 mL | 0.2307 mL | 0.4613 mL | 1.1533 mL | |
| 80 mM | 0.0346 mL | 0.1730 mL | 0.3460 mL | 0.8650 mL | |
| 100 mM | 0.0277 mL | 0.1384 mL | 0.2768 mL | 0.6920 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
ML-9 Related Classifications
HY-100932 Related Classifications
Powered by Bioz