2. Cell Cycle/DNA Damage
  3. DNA Alkylator/Crosslinker
  4. Ifosfamide

Ifosfamide is a CNS-penetrant alkylating chemotherapeutic agent with activity against a wide range of tumors.

For research use only. We do not sell to patients.

CAS No. : 3778-73-2

Size Price Stock Quantity
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO
ready for reconstitution
 In-stock
Solution
10 mM * 1 mL in DMSO In-stock
Solid
200 mg In-stock
500 mg In-stock
1 g   Get quote  
5 g   Get quote  

* Please select Quantity before adding items.

This product is a controlled substance and not for sale in your territory.

Customer Review

Based on 10 publication(s) in Google Scholar

Other Forms of Ifosfamide:

Ifosfamide Related Antibodies

Top Publications Citing Use of Products

    Ifosfamide purchased from MedChemExpress. Usage Cited in: Cell Res. 2020 Oct;30(10):833-853.  [Abstract]

    Normalized cell viability of GSCs in tri-culture and tetra-culture models following treatment with 50 μM of ifosfamide.

    Ifosfamide purchased from MedChemExpress. Usage Cited in: Cell Res. 2020 Oct;30(10):833-853.  [Abstract]

    Normalized cell viability of CW468 and 2907 GSCs following treatment with varying doses of ifosfamide (0.1-100 μM) in sphere culture. IC50 values were calculated using a variable slope nonlinear regression model.

    Ifosfamide purchased from MedChemExpress. Usage Cited in: Cell Res. 2020 Oct;30(10):833-853.  [Abstract]

    Bioluminescence imaging of mice bearing subcutaneous glioblastoma tumors derived from CW468 GSCs over a time course of treatment with ifosfamide (80 mg/kg) or vehicle.

    Ifosfamide purchased from MedChemExpress. Usage Cited in: Cell Res. 2020 Oct;30(10):833-853.  [Abstract]

    Normalized bioluminescent signal for each mouse over a time course of treatment with ifosfamide (80 mg/kg) or vehicle. Tumor growth for each mouse was plotted over time and normalized to the day 7 reading. *, p = 0.02. Two way mixed-effects ANOVA was used for statistical analysis.

    Ifosfamide purchased from MedChemExpress. Usage Cited in: Cell Res. 2020 Oct;30(10):833-853.  [Abstract]

    Normalized tumor growth rate per week plotted for each mouse over a time course of treatment with ifosfamide (80 mg/kg) or vehicle. **, p=0.006. Unpaired two-way t-test was used for statistical analysis

    • Biological Activity

    • Protocol

    • Purity & Documentation

    • References

    • Customer Review

    Description

    Ifosfamide is a CNS-penetrant alkylating chemotherapeutic agent with activity against a wide range of tumors.

    IC50 & Target

    DNA Alkylator[1]
    In Vitro

    Ifosfamide is an alkylating chemotherapeutic agent with activity against a wide range of tumors[1].
    Ifosfamide is activated by the cytochrome P450 family. Ifosfamide (0-5 mM) suppresses the viability of CYP2B1-expressing C8III-1 cells, while it is cytotoxic to the non-CYP2B1-expressing CrFK cells only at high concentration (5 mM)[2].
    CYP BM3 mutants activates Ifosfamide, and Ifosfamide shows inhibitory activity against human U2OS cells[3].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    Ifosfamide Related Antibodies
    In Vivo

    Ifosfamide (50 mg/kg, i.p.) treatment before mating increases percentage of post-implantation loss and resorbs fetuses in pregnant rats. Ifosfamide also (50 mg/kg, i.p.) decreases the progesterone in the serum of pregnant rats. However, Ifosfamide causes no obvious difference with the control rats at 25 mg/kg. Ifosfamide (25, 50 mg/kg, i.p.) induces apoptosis and histological changes in the placentas and prenatal rats, most sensitive fetal organs are the brain, liver and kidney[1].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
    Clinical Trial
    Molecular Weight

    261.09

    Formula

    C7H15Cl2N2O2P
    CAS No.
    Appearance

    Solid

    Color

    White to off-white

    SMILES

    ClCCN1P(OCCC1)(NCCCl)=O
    Shipping

    Room temperature in continental US; may vary elsewhere.
    Storage

    4°C, protect from light

    *In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)

    Solvent & Solubility
    In Vitro: 

    DMSO : ≥ 125 mg/mL (478.76 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

    *"≥" means soluble, but saturation unknown.

    Preparing
    Stock Solutions
    Concentration Solvent Mass 1 mg 5 mg 10 mg
    1 mM 3.8301 mL 19.1505 mL 38.3010 mL
    5 mM 0.7660 mL 3.8301 mL 7.6602 mL
    View the Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

    • Molarity Calculator

    • Dilution Calculator

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    Mass
    =
    Concentration
    ×
    Volume
    ×
    Molecular Weight *

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    This equation is commonly abbreviated as: C1V1 = C2V2

    Concentration (start)

    C1

    ×
    Volume (start)

    V1

    =
    Concentration (final)

    C2

    ×
    Volume (final)

    V2

    In Vivo:

    Select the appropriate dissolution method based on your experimental animal and administration route.

    For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
    To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
    The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

    • Protocol 1

      Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

      Solubility: ≥ 2.08 mg/mL (7.97 mM); Clear solution

      This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

      Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
    • Protocol 2

      Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

      Solubility: ≥ 2.08 mg/mL (7.97 mM); Clear solution

      This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

      Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.

    For the following dissolution methods, please prepare the working solution directly. It is recommended to prepare fresh solutions and use them promptly within a short period of time.
    The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

    • Protocol 1

      Add each solvent one by one:  0.5% CMC-Na/saline water

      Solubility: 25 mg/mL (95.75 mM); Clear solution; Need ultrasonic

    In Vivo Dissolution Calculator
    Please enter the basic information of animal experiments:

    Dosage

    mg/kg

    Animal weight
    (per animal)

    g

    Dosing volume
    (per animal)

    μL

    Number of animals

    Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
    Please enter your animal formula composition:
    %
    DMSO +
    % 
    +
    %
    Tween-80 +
    %
    Saline
    Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
    The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
    Calculation results:
    Working solution concentration: mg/mL
    Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).

    *In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)

    The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
    Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
     If the continuous dosing period exceeds half a month, please choose this protocol carefully.
    Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
    Purity & Documentation

    Purity: 99.89%

    SDS (644 KB)

    COA (249 KB) HNMR (255 KB) RP-HPLC (206 KB) MS (69 KB)

    Handling Instructions (2659 KB)
    References
    Cell Assay
    [2]

    In a 3-cm dish, 4 × 104 cells are seeded in 2 mL of medium. The next day, Ifosfamide is added to final concentrations from 0 to 5 mM. After six additional days the medium is removed, the cells washed with PBS, and either stained or counted[2].

    MCE has not independently confirmed the accuracy of these methods. They are for reference only.
    Animal Administration
    [1]

    Rats[1]
    Prior to mating, female rats are divided into four groups of eight: group 1, untreated negative controls; group 2, rats injected i.p. with 1 mL 0.9% NaCl; group 3, rats injected i.p. with 25 mg/kg Ifosfamide; group 4, rats injected i.p. with 50 mg/kg Ifosfamide. After injection of Ifosfamide once daily for 5 consecutive days, three females are placed in a cage with one untreated male for up to 1 week. Vaginal smears are examined daily to determine pregnancy. The first 24 h period following mating is designated day one of pregnancy if sperm are detected. The pregnant females are housed singly and observed daily for signs of toxicity and abortion. All pregnant animals are sacrificed by decapitation on day 18 of gestation. Cardiac blood (2.5 -3 mL/rat) is collected in nonheparinized test tubes, centrifuged at 3,000× g for 30 min and the serum is decanted and stored at -70°C until used for hormone assay. After blood collection, uteri and both ovaries are removed, washed in saline solution and the corpora lutea of pregnancy are counted visually, and the number of implantation sites, resorption sites and viable fetuses are counted in each uterine horn. Each fetus is removed from its umbilical cord, weighed and the crown rump (CR) length is measured. Fetuses are examined for external malformation and the placental weights are recorded. Fetuses and placentas of control and treated groups are fixed in 10% neutral buffered formalin for immunohistochemical and histological examination[1].

    MCE has not independently confirmed the accuracy of these methods. They are for reference only.
    References

    Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

    Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
    DMSO 1 mM 3.8301 mL 19.1505 mL 38.3010 mL 95.7524 mL
    5 mM 0.7660 mL 3.8301 mL 7.6602 mL 19.1505 mL
    10 mM 0.3830 mL 1.9150 mL 3.8301 mL 9.5752 mL
    15 mM 0.2553 mL 1.2767 mL 2.5534 mL 6.3835 mL
    20 mM 0.1915 mL 0.9575 mL 1.9150 mL 4.7876 mL
    25 mM 0.1532 mL 0.7660 mL 1.5320 mL 3.8301 mL
    30 mM 0.1277 mL 0.6383 mL 1.2767 mL 3.1917 mL
    40 mM 0.0958 mL 0.4788 mL 0.9575 mL 2.3938 mL
    50 mM 0.0766 mL 0.3830 mL 0.7660 mL 1.9150 mL
    60 mM 0.0638 mL 0.3192 mL 0.6383 mL 1.5959 mL
    80 mM 0.0479 mL 0.2394 mL 0.4788 mL 1.1969 mL
    100 mM 0.0383 mL 0.1915 mL 0.3830 mL 0.9575 mL
    • No file chosen (Maximum size is: 1024 Kb)
    • If you have published this work, please enter the PubMed ID.
    • Your name will appear on the site.

    Ifosfamide Related Classifications

    Help & FAQs
    • Do most proteins show cross-species activity?

      Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

    Keywords:

    Ifosfamide3778-73-2DNA Alkylator/CrosslinkerInhibitorinhibitorinhibit

    Your Recently Viewed Products:

    Inquiry Online

    Your information is safe with us. * Required Fields.

    Product Name

    		  

    Requested Quantity *

    Applicant Name *

    		 

    Salutation

    Email Address *

    		 

    Phone Number *

    Department

    		 

    Organization Name *

    City

    State

    Country or Region *

    		      

    Remarks

    Bulk Inquiry

    Inquiry Information

    Product Name:
    Ifosfamide
    Cat. No.:
    HY-17419
    Quantity:
    MCE Japan Authorized Agent:

    Customer Review

    Thank You for Your Feedback!

    Request for HNMR Report

    Please fill out this form to request the QC report. We will send it to your Email address shortly.

    Your information is safe with us. * Required Fields.

    Product Name

    		  

    Lot #

    Applicant Name *

    		 

    Email Address *

    Phone Number

    		 

    Department *

    Organization Name *

    		 

    Country or Region *

    Remarks

    SAFETY DATA SHEET (SDS)

    English - EN (644 KB) Français - FR (644 KB) Deutsch - DE (644 KB) Norwegian - NO (644 KB) Español - ES (644 KB) Swedish - SV (644 KB) Italian - IT (644 KB) Korean - KR (644 KB) Portuguese - PT (644 KB)

    Request for HNMR Report

    We have received your request and will respond to you as soon as possible.