Factor D inhibitor 6
Based on 1 Customer Validation
Factor D inhibitor 6 is a potent, highly selective and orally active factor D (FD) inhibitor with an IC50 of 30 nM and a Kd of 6 nM. Factor D inhibitor 6 is inactive against factor B, lassical and lectin complement-pathway activation, and a broad assay panel of receptors, ion channels, kinases and proteases.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 99.18%
- CAS No.: 1386455-51-1
- 화학식: C23H22ClFN6O3
- 분자량:484.91
-
보관:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
Biological Activity
Factor D inhibitor 6 (compound 6) effectively blocks both alternative pathway (AP)-mediated hemolysis in 10% human serum (IC50 = 6 nM) and AP-induced membrane-attack complex (MAC) formation in lepirudinanticoagulated 50% human whole blood (IC50 = 0.14 μM)[1].
Factor D inhibitor 6 (compound 6) shows modest inhibition of murine FD (IC50 = 0.86 μM)[1].
Factor D inhibitor 6 (compound 6) inhibits both hemolysis and component 3 (C3) deposition on the surface of red blood cells (RBCs) with an IC50 value of 70 nM, consistent with inhibition of the AP amplification loop[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:C57Bl/6 mice induced by lipopolysaccharide (LPS)[1]
-
Dosage:1 mg/kg, 3 mg/kg, 10 mg/kg
-
Administration:Oral gavage; once
-
Result:Dosed-ependently inhibited complement activation, with full inhibition at 10 mg/kg.
Chemical Information
-
CAS No. 1386455-51-1
-
Appearance Solid
-
분자량 484.91
-
화학식 C23H22ClFN6O3
-
Color White to off-white
-
SMILES
O=C([C@H]1N(C(CN2N=C(C(N)=O)C3=C2C=NC=C3)=O)[C@]4([H])C[C@]4([H])C1)N[C@@H](C5=CC=CC(Cl)=C5F)C
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
용액&용해도
DMSO : 250 mg/mL (515.56 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (4.29 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (4.29 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (282 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.0622 mL | 10.3112 mL | 20.6224 mL | 51.5560 mL |
| 5 mM | 0.4124 mL | 2.0622 mL | 4.1245 mL | 10.3112 mL | |
| 10 mM | 0.2062 mL | 1.0311 mL | 2.0622 mL | 5.1556 mL | |
| 15 mM | 0.1375 mL | 0.6874 mL | 1.3748 mL | 3.4371 mL | |
| 20 mM | 0.1031 mL | 0.5156 mL | 1.0311 mL | 2.5778 mL | |
| 25 mM | 0.0825 mL | 0.4124 mL | 0.8249 mL | 2.0622 mL | |
| 30 mM | 0.0687 mL | 0.3437 mL | 0.6874 mL | 1.7185 mL | |
| 40 mM | 0.0516 mL | 0.2578 mL | 0.5156 mL | 1.2889 mL | |
| 50 mM | 0.0412 mL | 0.2062 mL | 0.4124 mL | 1.0311 mL | |
| 60 mM | 0.0344 mL | 0.1719 mL | 0.3437 mL | 0.8593 mL | |
| 80 mM | 0.0258 mL | 0.1289 mL | 0.2578 mL | 0.6444 mL | |
| 100 mM | 0.0206 mL | 0.1031 mL | 0.2062 mL | 0.5156 mL |
Factor D inhibitor 6 Related Classifications
HY-122700 Related Classifications
Powered by Bioz