Praeruptorin B
Based on 1 Customer Validation
Praeruptorin B is an inhibitor of sterol regulatory element-binding proteins (SREBPs).
For research use only. We do not sell to patients.
- Purity: 99.95%
- CAS No.: 73069-28-0
- Formula: C24H26O7
- Molecular Weight:426.46
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
SREBP[1].
Praeruptorin B inhibits the SREBPs activity and decreases intracellular lipid levels. Praeruptorin B is found to powerfully decrease the SRE-luciferase activity, and this effect is dose dependent. Praeruptorin B shows negligible cytotoxicity, even at the higher concentration. Praeruptorin B also significantlytly down-regulates the expression of SREBP-1c and SREBP-2[1]. Praeruptorin B also exhibits significant inhibition on the activity of UGT1A9[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 73069-28-0
-
Appearance Solid
-
Molecular Weight 426.46
-
Formula C24H26O7
-
Color White to off-white
-
SMILES
O=C1C=CC2=CC=C3C([C@H](OC(/C(C)=C\C)=O)[C@H](OC(/C(C)=C\C)=O)C(C)(C)O3)=C2O1
-
Synonyms
Praeruptorin D
-
Structure Classification
-
Initial Source
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 25 mg/mL (58.62 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (5.86 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocol
HepG2 cells and HL-7702 cells are used in the study. Cell proliferation is determined by the MTT assays. The HepG2 cells are seeded in 96-well plates with 2.0×104 cells per well in DMEM containing 10% FBS for 24 h. Cells are further treated with Praeruptorin B (0, 2.5, 5, 10, 20, 40, 80 μM) for 18 h[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Mice[1]
Sixweek-old male C57BL/6J mice are housed in colony cages and maintained on a light/dark cycle. On a caloric basis, the HFD contains 60% fat, 20.6% carbohydrate and 19.4% protein, whereas the normal diet contains 13% fat, 60% carbohydrate and 27% protein. The mice are randomly divided into the following four groups (n=6 per group): vehicle-treated chow group, vehicle-treated HFD group, lovastatin-treated HFD group (30 mg per kg per day) and Praeruptorin B-treated HFD group (25 or 50 mg per kg per day). HFD-fed mice are gavaged with Praeruptorin B or lovastatin dissolved in 0.5% CMC-Na for 6 weeks[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Purity & Documentation
-
Data Sheet (280 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3449 mL | 11.7244 mL | 23.4489 mL | 58.6221 mL |
| 5 mM | 0.4690 mL | 2.3449 mL | 4.6898 mL | 11.7244 mL | |
| 10 mM | 0.2345 mL | 1.1724 mL | 2.3449 mL | 5.8622 mL | |
| 15 mM | 0.1563 mL | 0.7816 mL | 1.5633 mL | 3.9081 mL | |
| 20 mM | 0.1172 mL | 0.5862 mL | 1.1724 mL | 2.9311 mL | |
| 25 mM | 0.0938 mL | 0.4690 mL | 0.9380 mL | 2.3449 mL | |
| 30 mM | 0.0782 mL | 0.3908 mL | 0.7816 mL | 1.9541 mL | |
| 40 mM | 0.0586 mL | 0.2931 mL | 0.5862 mL | 1.4656 mL | |
| 50 mM | 0.0469 mL | 0.2345 mL | 0.4690 mL | 1.1724 mL |