Atipamezole
Based on 9 publication(s) in Google Scholar
Atipamezole (MPV 1248) is a potent α2-adrenoceptor antagonist with a Ki of 1.6 nM.
For research use only. We do not sell to patients.
- Purity: 99.97%
- CAS No.: 104054-27-5
- Formula: C14H16N2
- Molecular Weight:212.29
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
Publications Citing Use of MedChemExpress (MCE) Atipamezole
More- Sci Transl Med. 2023 Jan 18;15(679):eabq4064. [Abstract]
- Protein Cell. 2019 Mar;10(3):178-195. [Abstract]
- Int Immunopharmacol. 2025 Dec 19:170:116069. [Abstract]
- Front Cell Dev Biol. 2021 Mar 11:9:636327. [Abstract]
- Exp Mol Pathol. 2021 Feb;118:104587. [Abstract]
- Brain Res. 2020 Sep 15;1743:146949. [Abstract]
- Eur J Neurosci. 2021 Apr 27. [Abstract]
- bioRxiv. 2024 November 03.
- Research Square Preprint. 2022 May.
All Adrenergic Receptor Isoforms
More
Biological Activity
|
α adrenergic receptor |
The affinity of atipamezole for α2-adrenoceptors and its α2/α1 selectivity ratio are considerably higher than yohimbine. Atipamezole is not selective for subtypes of α2-adrenoceptors. It has negligible affinity for 5-HT1, 5-HT2 and I2 bindings sites[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 104054-27-5
-
Appearance Solid
-
Molecular Weight 212.29
-
Formula C14H16N2
-
Color White to off-white
-
SMILES
CCC1(C2=CN=CN2)CC3=C(C=CC=C3)C1
-
Synonyms
MPV 1248
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (9)
-
Journal Impact Factor
-
Most Recent
-
Sci Transl Med
S-217622, a SARS-CoV-2 main protease inhibitor, decreases viral load and ameliorates COVID-19 severity in hamsters. [Abstract]2023 Jan 18;15(679):eabq4064. PMID: 36327352 -
Protein Cell
Identification of serotonin 2A receptor as a novel HCV entry factor by a chemical biology strategy. [Abstract]2019 Mar;10(3):178-195. PMID: 29542010 -
Int Immunopharmacol
Repurposing the anesthetic dexmedetomidine: a novel antidote for sulfur mustard analog-induced acute lung injury via multi-mechanism modulation. [Abstract]2025 Dec 19:170:116069. PMID: 41421231 -
Front Cell Dev Biol
Protective Effects of Dexmedetomidine on the Vascular Endothelial Barrier Function by Inhibiting Mitochondrial Fission via ER/Mitochondria Contact. [Abstract]2021 Mar 11:9:636327. PMID: 33777946 -
Exp Mol Pathol
Up-regulation of miRNA-151-3p enhanced the neuroprotective effect of dexmedetomidine against β-amyloid by targeting DAPK-1 and TP53. [Abstract]2021 Feb;118:104587. PMID: 33275947 -
Brain Res
Blockade of adenosine A1 receptor in nucleus tractus solitarius attenuates baroreflex sensitivity response to dexmedetomidine in rats. [Abstract]2020 Sep 15;1743:146949. PMID: 32522627 -
Eur J Neurosci
Dexmedetomidine protects SH-SY5Y cells against MPP+ -induced declining of mitochondrial membrane potential and cell cycle deficits. [Abstract]2021 Apr 27. PMID: 33905578 -
-
Solvent & Solubility
DMSO : 100 mg/mL (471.05 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (11.78 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (11.78 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (276 KB)
-
SDS (396 KB)
- English - EN (396 KB)
- Français - FR (396 KB)
- Deutsch - DE (396 KB)
- Norwegian - NO (396 KB)
- Español - ES (396 KB)
- Swedish - SV (396 KB)
- Italian - IT (396 KB)
- Korean - KR (396 KB)
- Portuguese - PT (396 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 4.7105 mL | 23.5527 mL | 47.1054 mL | 117.7634 mL |
| 5 mM | 0.9421 mL | 4.7105 mL | 9.4211 mL | 23.5527 mL | |
| 10 mM | 0.4711 mL | 2.3553 mL | 4.7105 mL | 11.7763 mL | |
| 15 mM | 0.3140 mL | 1.5702 mL | 3.1404 mL | 7.8509 mL | |
| 20 mM | 0.2355 mL | 1.1776 mL | 2.3553 mL | 5.8882 mL | |
| 25 mM | 0.1884 mL | 0.9421 mL | 1.8842 mL | 4.7105 mL | |
| 30 mM | 0.1570 mL | 0.7851 mL | 1.5702 mL | 3.9254 mL | |
| 40 mM | 0.1178 mL | 0.5888 mL | 1.1776 mL | 2.9441 mL | |
| 50 mM | 0.0942 mL | 0.4711 mL | 0.9421 mL | 2.3553 mL | |
| 60 mM | 0.0785 mL | 0.3925 mL | 0.7851 mL | 1.9627 mL | |
| 80 mM | 0.0589 mL | 0.2944 mL | 0.5888 mL | 1.4720 mL | |
| 100 mM | 0.0471 mL | 0.2355 mL | 0.4711 mL | 1.1776 mL |