Mifamurtide sodium
Based on 6 publication(s) in Google Scholar
Mifamurtide sodium (MTP-PE sodium), an analog of the muramyl dipeptide (MDP), is a nonspecific immunomodulator by stimulating the immune response activating macrophages and monocytes. Mifamurtide sodium is a specific ligand for NOD2 and acts as an insulin sensitizer. Mifamurtide sodium has potential for use in rare disease and osteosarcoma research.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.92%
- CAS No.: 90825-43-7
- Formule: C59H108N6NaO19P
- Masse moléculaire:1259.48
-
Stockage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
HY-B1521
Aluminum Hydroxide
-
HY-N0139
Troxerutin
-
HY-W116335A
Dried aluminum hydroxide gel,United States Pharmacopeia (USP) Reference Standard
-
HY-119684
Maresin 2
-
HY-117432
JC-171
-
HY-120048
NBC19
-
HY-153554
NLRP3-IN-18
-
HY-N0139R
Troxerutin (Standard)
-
HY-110051
DPP4-In hydrochloride
-
HY-131040
NLRP3-IN-NBC6
Publications Citing Use of MedChemExpress (MCE) Mifamurtide sodium
More
Activité biologique
|
NOD2 |
Mifamurtide sodium (MTP-PE sodium; 100 µM) induces a reduction of MG63 cells number when co-cultured with macrophages[3].
Mifamurtide sodium (100 µM) increases both the M1 polarization marker iNOS and the M2 polarization marker CD206 mRNAs; both pro-inflammatory (IL-1β, IL-6) and anti-inflammatory (IL-4, IL-10) cytokines. Mifamurtide sodium increases the iron transporter DMT1 protein[3].
L-mifamurtide sodium (5, 5000 nM; for 48 hours) alone has no direct effect on the proliferation rate of the two osteosarcoma cell lines MOS-J and KHOS in vitro or in vivo[1].
Mifamurtide sodium acts as a nonspecific immunomodulator by activating macrophages and monocytes related to the upregulation of tumoricidal activity and secretion of pro-inflammatory cytokines including tumor necrosis factor (TNF)-a, interleukin (IL)-1, IL-6, IL-8, IL-12, nitric oxide (NO), prostaglandin E2 (PGE2) and PGD2[3].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Mifamurtide sodium (50 μg/mouse) improves glucose tolerance during endotoxemia in mice. Mifamurtide sodium (equivalent to 20 μg MDP; 4 times per week for 5 weeks) improves glucose tolerance in HFD-fed mice without altering body mass[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:C57BL/6, BALB/c mice with KHOS osteosarcoma cells[1]
-
Dosage:1 mg/kg
-
Administration:IV; twice per week for 4 weeks
-
Result:Caused a trend of diminished spontaneous lung metastasis dissemination in xenogeneic (KHOS) and syngeneic (MOS-J) models.
Chemical Information
-
CAS No. 90825-43-7
-
Appearance Solid
-
Masse moléculaire 1259.48
-
Formule C59H108N6NaO19P
-
Color White to off-white
-
SMILES
CCCCCCCCCCCCCCCC(OC[C@@H](OC(CCCCCCCCCCCCCCC)=O)COP(OCCNC([C@@H](NC(CC[C@@H](NC([C@@H](NC([C@H](O[C@]([C@H](O)[C@H](O)CO)([H])[C@@H](NC(C)=O)C=O)C)=O)C)=O)C(N)=O)=O)C)=O)(O[Na])=O)=O
-
Synonyms
MTP-PE sodium; L-MTP-PE sodium; CGP 19835 sodium
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (6)
-
Journal Impact Factor
-
Most Recent
-
J Extracell Vesicles
Extracellular Vesicles Containing MDP Derived from Lactobacillus rhamnosus GG Inhibit HSV-2 Infection by Activating the NOD2-IFN-I Signalling Pathway. [Abstract]2025 Aug;14(8):e70152. PMID: 40825575 -
J Clin Invest
2024 Oct 1;134(22):e179527. PMID: 39545417 -
AAPS PharmSciTech
Long-Circulating and Targeted Liposomes Co-loading Cisplatin and Mifamurtide: Formulation and Delivery in Osteosarcoma Cells. [Abstract]2024 Nov 26;25(8):272. PMID: 39592553 -
-
-
Solvant et solubilité
DMSO : 50 mg/mL (39.70 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (3.97 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 5 mg/mL (3.97 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (274 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Kevin Biteau, et al. L-MTP-PE and zoledronic acid combination in osteosarcoma: preclinical evidence of positive therapeutic combination for clinical transfer. Am J Cancer Res. 2016 Feb 15;6(3):677-89. [Content Brief]
[2]. Joseph F Cavallari, et al. Muramyl Dipeptide-Based Postbiotics Mitigate Obesity-Induced Insulin Resistance via IRF4. Cell Metab. 2017 May 2;25(5):1063-1074.e3. [Content Brief]
[3]. Francesca Punzo, et al. Mifamurtide and TAM-like macrophages: effect on proliferation, migration and differentiation of osteosarcoma cells. Oncotarget. 2020 Feb 18;11(7):687-698. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 0.7940 mL | 3.9699 mL | 7.9398 mL | 19.8495 mL |
| 5 mM | 0.1588 mL | 0.7940 mL | 1.5880 mL | 3.9699 mL | |
| 10 mM | 0.0794 mL | 0.3970 mL | 0.7940 mL | 1.9849 mL | |
| 15 mM | 0.0529 mL | 0.2647 mL | 0.5293 mL | 1.3233 mL | |
| 20 mM | 0.0397 mL | 0.1985 mL | 0.3970 mL | 0.9925 mL | |
| 25 mM | 0.0318 mL | 0.1588 mL | 0.3176 mL | 0.7940 mL | |
| 30 mM | 0.0265 mL | 0.1323 mL | 0.2647 mL | 0.6616 mL |
Mifamurtide sodium Related Classifications
HY-13682B Related Classifications
Powered by Bioz