TA-01
Based on 1 Customer Validation
TA-01 is a potent CK1 and p38 MAPK inhibitor, with IC50s of 6.4 nM, 6.8 nM, 6.7 nM for CK1ε, CK1δ and p38 MAPK, respectively. TA-01 acts as a cardiogenic inhibitor.
For research use only. We do not sell to patients.
- Purity: 99.86%
- CAS No.: 1784751-18-3
- Formula: C20H12F3N3
- Molecular Weight:351.32
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
Biological Activity
|
CK1δ 6.8 nM (IC50) |
p38 MAP kinase 6.7 nM (IC50) |
TA-01 is a potent CK1 and p38 MAPK inhibitor, with IC50s of 6.4 nM, 6.8 nM, 6.7 nM for CK1ε, CK1δ and p38 MAPK, respectively. TA-01 (5 μM) is not cytotoxic, completely inhibits cardiogenesis, but induces cardiogenesis at lower concentration[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 1784751-18-3
-
Appearance Solid
-
Molecular Weight 351.32
-
Formula C20H12F3N3
-
Color White to off-white
-
SMILES
FC(C=C1)=CC=C1C2=C(C3=CC=NC=C3)NC(C4=C(F)C=CC=C4F)=N2
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Solvent & Solubility
DMSO : 50 mg/mL (142.32 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (7.12 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocol
Compounds (TA-01) are dissolved in DMSO and tested at 10 μM concentrations against a panel of 97 kinases, which are related to stem cell differentiation and cell signaling pathways. Kinome profiling is carried out by kinase profiling service[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
HES-3, H7 and IPS are harvested and seeded at 1.1 × 106 cells/mL as EBs in ultra-low attachment 12-well plates in bSFS medium: DMEM supplemented with 2 mM l-glutamine, 0.182 mM sodium pyruvate, 1% non-essential amino acids, 0.1 mM β-mercaptoethanol, 5.6 mg/L transferrin, 20 μg/L sodium selenite, 0.25% (w/vol) Bovine Serum Albumin and 0.25% (w/vol) Hysoy. Cells are incubated at 37°C and 5% CO2 to allow EB formation. The medium is refreshed after 1 day and then every 2-3 days. Cells are stimulated with the respective compounds (TA-01) dissolved in DMSO (1 μL DMSO/mL of media) starting from day 1 or day 4, until day 8. CHIR99021 is applied for the first 24 h only[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Purity & Documentation
-
Data Sheet (281 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.8464 mL | 14.2320 mL | 28.4641 mL | 71.1602 mL |
| 5 mM | 0.5693 mL | 2.8464 mL | 5.6928 mL | 14.2320 mL | |
| 10 mM | 0.2846 mL | 1.4232 mL | 2.8464 mL | 7.1160 mL | |
| 15 mM | 0.1898 mL | 0.9488 mL | 1.8976 mL | 4.7440 mL | |
| 20 mM | 0.1423 mL | 0.7116 mL | 1.4232 mL | 3.5580 mL | |
| 25 mM | 0.1139 mL | 0.5693 mL | 1.1386 mL | 2.8464 mL | |
| 30 mM | 0.0949 mL | 0.4744 mL | 0.9488 mL | 2.3720 mL | |
| 40 mM | 0.0712 mL | 0.3558 mL | 0.7116 mL | 1.7790 mL | |
| 50 mM | 0.0569 mL | 0.2846 mL | 0.5693 mL | 1.4232 mL | |
| 60 mM | 0.0474 mL | 0.2372 mL | 0.4744 mL | 1.1860 mL | |
| 80 mM | 0.0356 mL | 0.1779 mL | 0.3558 mL | 0.8895 mL | |
| 100 mM | 0.0285 mL | 0.1423 mL | 0.2846 mL | 0.7116 mL |