trans-Tranilast
Based on 1 Customer Validation
trans-Tranilast (trans-MK-341) is an isomer of Tranilast (HY-B0195), and an anti-allergy agent used in studies of bronchial asthma, allergic rhinitis, and atopic dermatitis.
For research use only. We do not sell to patients.
- Purity: 99.63%
- CAS No.: 70806-55-2
- Formula: C18H17NO5
- Molecular Weight:327.34
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
GPCR/G Protein Compound Library
HY-L006
-
Immunology/Inflammation Compound Library
HY-L007
-
FDA-Approved Drug Library
HY-L022
-
Anti-Cancer Compound Library
HY-L025
-
Drug Repurposing Compound Library
HY-L035
-
Covalent Screening Library
HY-L036
-
Anti-Cardiovascular Disease Compound Library
HY-L046
-
Neurotransmitter Receptor Compound Library
HY-L062
-
FDA Approved & Pharmacopeial Drug Library
HY-L066
-
Angiogenesis-Related Compound Library
HY-L088
-
FDA-Approved Anticancer Drug Library
HY-L122
-
Anti-Prostate Cancer Compound Library
HY-L124
-
Off-patent Drug Library
HY-L141
-
Antihypertensive Compound Library
HY-L145
-
Membrane Protein-targeted Compound Library
HY-L149
-
Membrane Receptor-targeted Compound Library
HY-L150
-
Cysteine Targeted Covalent Library
HY-L153
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Covalent Screening Library Plus
HY-L036P
-
Drug Repurposing Compound Library Plus
HY-L035P
-
FDA-Approved Drug Library Plus
HY-L022P
-
FDA-Approved Drug Library Mini
HY-L022M
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Lactylation Compound Library
HY-L249
All Angiotensin Receptor Isoforms
More
Biological Activity
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HEK293 | IC50 |
126 μM
Compound: 11
|
Antagonist activity at human TRPA1 expressed in HEK293 cells assessed as inhibition of CA-induced increase in calcium influx incubated for 10 mins prior to CA addition by Fluo-4-AM dye based fluorescence assayy
Antagonist activity at human TRPA1 expressed in HEK293 cells assessed as inhibition of CA-induced increase in calcium influx incubated for 10 mins prior to CA addition by Fluo-4-AM dye based fluorescence assayy
|
[PMID: 30878828] |
| L02 | IC50 |
82.3 μM
Compound: 1; TR
|
Antiproliferative activity against human LO2 cells assessed as inhibition of cell growth incubated for 72 hrs by CCK-8 assay
Antiproliferative activity against human LO2 cells assessed as inhibition of cell growth incubated for 72 hrs by CCK-8 assay
|
[PMID: 36037790] |
| RBL-2H3 | IC50 |
0.49 mM
Compound: Tranilast
|
Inhibition of rat RBL2H3 cell degranulation assessed as inhibition of beta-hexosamidase release after 10 mins by microplate reader assay
Inhibition of rat RBL2H3 cell degranulation assessed as inhibition of beta-hexosamidase release after 10 mins by microplate reader assay
|
[PMID: 12398545] |
| RBL-2H3 | IC50 |
0.49 mM
Compound: Tranilast
|
Inhibition of beta-hexosaminidase in anti-DNP IgE sensitized rat RBL2H3 cells after 10 mins
Inhibition of beta-hexosaminidase in anti-DNP IgE sensitized rat RBL2H3 cells after 10 mins
|
[PMID: 15387643] |
trans-Tranilast is readily trans-formed by photo-irradiation to N-(cis-3,4-dimethoxycinnamoyl)anthranilic acid (cis-isomer) and acyclobutane derivative (dimer)[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 70806-55-2
-
Appearance Solid
-
Molecular Weight 327.34
-
Formula C18H17NO5
-
Color White to off-white
-
SMILES
O=C(O)C1=CC=CC=C1NC(/C=C/C2=CC(OC)=C(OC)C=C2)=O
-
Synonyms
trans-MK-341; trans-SB 252218
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Solvent & Solubility
DMSO : 100 mg/mL (305.49 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (7.64 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (274 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.0549 mL | 15.2746 mL | 30.5493 mL | 76.3732 mL |
| 5 mM | 0.6110 mL | 3.0549 mL | 6.1099 mL | 15.2746 mL | |
| 10 mM | 0.3055 mL | 1.5275 mL | 3.0549 mL | 7.6373 mL | |
| 15 mM | 0.2037 mL | 1.0183 mL | 2.0366 mL | 5.0915 mL | |
| 20 mM | 0.1527 mL | 0.7637 mL | 1.5275 mL | 3.8187 mL | |
| 25 mM | 0.1222 mL | 0.6110 mL | 1.2220 mL | 3.0549 mL | |
| 30 mM | 0.1018 mL | 0.5092 mL | 1.0183 mL | 2.5458 mL | |
| 40 mM | 0.0764 mL | 0.3819 mL | 0.7637 mL | 1.9093 mL | |
| 50 mM | 0.0611 mL | 0.3055 mL | 0.6110 mL | 1.5275 mL | |
| 60 mM | 0.0509 mL | 0.2546 mL | 0.5092 mL | 1.2729 mL | |
| 80 mM | 0.0382 mL | 0.1909 mL | 0.3819 mL | 0.9547 mL | |
| 100 mM | 0.0305 mL | 0.1527 mL | 0.3055 mL | 0.7637 mL |
Powered by Bioz