SRS16-86
Based on 1 Customer Validation
SRS16-86 is a potent inhibitor of ferroptosis. SRS16-86 is more stable than more stable to metabolism and plasma than Ferrostatin-1 in vivo. SRS16-86 can be used for renal ischemia-reperfusion injury (IRI) and spinal cord injury (SCI) research.
For research use only. We do not sell to patients.
- Purity: 98.0%
- CAS No.: 1793052-96-6
- Formula: C26H32N4O2
- Molecular Weight:432.56
-
Storage:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
Immunology/Inflammation Compound Library
HY-L007
-
Ferroptosis Compound Library
HY-L051
-
Targeted Diversity Library
HY-L099
-
Heterocyclic Compound Library
HY-L138
-
Cell Death Library
HY-L162
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
Biological Activity
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HT-1080 | IC50 |
350 nM
Compound: 4; SRS16-86
|
Antiferroptotic activity in human HT1080 cells assessed as inhibition of erastin-induced cell death by cell based assay
Antiferroptotic activity in human HT1080 cells assessed as inhibition of erastin-induced cell death by cell based assay
|
[PMID: 26696014] |
SRS16-86 (1 μM; 24 hours; in the presence or absence of erastin) inhibits ferroptosis in? HT-1080 cells and NIH 3T3 cells[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Renal IRI model
-
Dosage:2 mg/kg; 15 min before the onset of surgery
-
Administration:Intraperitoneal injection; 2 mg/kg; 15 min before the onset of surgery
-
Result:Was protective from renal IRI.
-
Animal Model:Renal IRI model
-
Dosage:2 mg/kg
-
Administration:Combination with Necrostatin-1/Sanglifehrin A; 2 mg/kg; 4 weeks
-
Result:Further increased the protective effect of [Necrostatin-1/Sanglifehrin A] combination therapy in renal IRI model.
Chemical Information
-
CAS No. 1793052-96-6
-
Appearance Solid
-
Molecular Weight 432.56
-
Formula C26H32N4O2
-
Color Yellow to orange
-
SMILES
O=C(C1=CC(/N=C\C2=CN=CN=C2)=C(C=C1)NC3(C[C@H](C4)C5)C[C@H]5C[C@H]4C3)OC(C)(C)C
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Solvent & Solubility
DMSO : 33.33 mg/mL (77.05 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.78 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (5.78 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (279 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
[1]. Sam Hofmans, et al. Novel Ferroptosis Inhibitors with Improved Potency and ADME Properties. J Med Chem. 2016 Mar 10;59(5):2041-53. [Content Brief]
[2]. Andreas Linkermann, et al. Synchronized renal tubular cell death involves ferroptosis.Proc Natl Acad Sci U S A. 2014 Nov 25;111(47):16836-41. [Content Brief]
[3]. Yan Zhang, et al. Ferroptosis inhibitor SRS 16-86 attenuates ferroptosis and promotes functional recovery in contusion spinal cord injury. Brain Res. 2019 Mar 1;1706:48-57. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3118 mL | 11.5591 mL | 23.1182 mL | 57.7955 mL |
| 5 mM | 0.4624 mL | 2.3118 mL | 4.6236 mL | 11.5591 mL | |
| 10 mM | 0.2312 mL | 1.1559 mL | 2.3118 mL | 5.7795 mL | |
| 15 mM | 0.1541 mL | 0.7706 mL | 1.5412 mL | 3.8530 mL | |
| 20 mM | 0.1156 mL | 0.5780 mL | 1.1559 mL | 2.8898 mL | |
| 25 mM | 0.0925 mL | 0.4624 mL | 0.9247 mL | 2.3118 mL | |
| 30 mM | 0.0771 mL | 0.3853 mL | 0.7706 mL | 1.9265 mL | |
| 40 mM | 0.0578 mL | 0.2890 mL | 0.5780 mL | 1.4449 mL | |
| 50 mM | 0.0462 mL | 0.2312 mL | 0.4624 mL | 1.1559 mL | |
| 60 mM | 0.0385 mL | 0.1927 mL | 0.3853 mL | 0.9633 mL |
SRS16-86 Related Classifications
HY-135430 Related Classifications
Powered by Bioz