Fibrinogen Binding Inhibitor Peptide
Based on 1 Customer Validation
Fibrinogen Binding Inhibitor Peptide is a dodecapeptide (HHLGGAKQAGDV, H12), which is a fibrinogen γ-chain carboxy-terminal sequence (γ400-411). Fibrinogen Binding Inhibitor Peptide is a specific binding site of the ligand for activated glycoprotein (GP) IIb/IIIa.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 99.86%
- No. CAS: 89105-94-2
- Fòrmula: C50H80N18O16
- Peso molecular:1189.28
-
Almacenamiento:
Sealed storage, away from moisture.
Powder -80°C, 2 years , -20°C, 1 year* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
Actividad biológica
Glycoprotein (GP) IIb/IIIa, which exists on the membrane of platelets, changes its form from inactive to active when platelets adhere to collagen exposed on sites of vascular injury. In the circulation, platelet aggregation is mediated by fibrinogen by bridging adjacent platelets through GPIIb/IIIa in an activation-dependent manner. A dodecapeptide HHLGGAKQAGDV (H12), corresponding to the fibrinogen γ-chain carboxy-terminal sequence (γ400-411), is a specific binding site of the ligand for activated GPIIb/IIIa
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
No. CAS 89105-94-2
-
Appearance Solid
-
Peso molecular 1189.28
-
Fòrmula C50H80N18O16
-
Color White to off-white
-
Sequence
His-His-Leu-Gly-Gly-Ala-Lys-Gln-Ala-Gly-Asp-Val
-
Sequence Shortening
HHLGGAKQAGDV
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Sealed storage, away from moisture
Powder -80°C 2 years -20°C 1 year * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvente y solubilidad
H2O : 100 mg/mL (84.08 mM; Need ultrasonic)
DMSO : 100 mg/mL (84.08 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (2.10 mM); Suspended solution
This protocol yields a suspended solution of ≥ 2.5 mg/mL (saturation unknown). Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (2.10 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Pureza y Documentación
-
Ficha de datos (271 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 0.8408 mL | 4.2042 mL | 8.4084 mL | 21.0211 mL |
| 5 mM | 0.1682 mL | 0.8408 mL | 1.6817 mL | 4.2042 mL | |
| 10 mM | 0.0841 mL | 0.4204 mL | 0.8408 mL | 2.1021 mL | |
| 15 mM | 0.0561 mL | 0.2803 mL | 0.5606 mL | 1.4014 mL | |
| 20 mM | 0.0420 mL | 0.2102 mL | 0.4204 mL | 1.0511 mL | |
| 25 mM | 0.0336 mL | 0.1682 mL | 0.3363 mL | 0.8408 mL | |
| 30 mM | 0.0280 mL | 0.1401 mL | 0.2803 mL | 0.7007 mL | |
| 40 mM | 0.0210 mL | 0.1051 mL | 0.2102 mL | 0.5255 mL | |
| 50 mM | 0.0168 mL | 0.0841 mL | 0.1682 mL | 0.4204 mL | |
| 60 mM | 0.0140 mL | 0.0701 mL | 0.1401 mL | 0.3504 mL | |
| 80 mM | 0.0105 mL | 0.0526 mL | 0.1051 mL | 0.2628 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Fibrinogen Binding Inhibitor Peptide Related Classifications
HY-P1507 Related Classifications
Powered by Bioz