SR-318
Based on 1 publication(s) in Google Scholar
SR-318, a chemical probe, is a potent and highly selective p38 MAPK inhibitor with IC50s of 5 nM, 32 nM and 6.11 μM for p38α, p38β and p38α/β, respectively. SR-318 potently inhibits the TNF-α release in whole blood with an IC50 of 283 nM. SR-318 has anti-cancer and anti-inflammatory activity.
For research use only. We do not sell to patients.
- Purity: 98.17%
- CAS No.: 2413286-32-3
- Formula: C27H33N5O2
- Molecular Weight:459.58
-
Storage:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Publications Citing Use of MedChemExpress (MCE) SR-318
More
Biological Activity
|
p38α 5 nM (IC50) |
p38β 32 nM (IC50) |
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HEK293 | IC50 |
0.01 μM
Compound: 93; SR-318
|
Inhibition of p38-beta (unknown origin) expressed in human HEK293 cells incubated for 2 hrs followed by NanoBRET NanoGlo Substrate addition by NanoBRET assay
Inhibition of p38-beta (unknown origin) expressed in human HEK293 cells incubated for 2 hrs followed by NanoBRET NanoGlo Substrate addition by NanoBRET assay
|
[PMID: 31702918] |
| HEK293 | IC50 |
0.91 μM
Compound: 93; SR-318
|
Inhibition of ZAK (unknown origin) expressed in human HEK293 cells incubated for 2 hrs followed by NanoBRET NanoGlo Substrate addition by NanoBRET assay
Inhibition of ZAK (unknown origin) expressed in human HEK293 cells incubated for 2 hrs followed by NanoBRET NanoGlo Substrate addition by NanoBRET assay
|
[PMID: 31702918] |
| HEK293 | IC50 |
10 μM
Compound: 93; SR-318
|
Inhibition of MYLK4 (unknown origin) expressed in human HEK293 cells incubated for 2 hrs followed by NanoBRET NanoGlo Substrate addition by NanoBRET assay
Inhibition of MYLK4 (unknown origin) expressed in human HEK293 cells incubated for 2 hrs followed by NanoBRET NanoGlo Substrate addition by NanoBRET assay
|
[PMID: 31702918] |
| HEK293 | IC50 |
14 μM
Compound: 93; SR-318
|
Inhibition of RSK4 kinase domain 1 (unknown origin) expressed in human HEK293 cells incubated for 2 hrs followed by NanoBRET NanoGlo Substrate addition by NanoBRET assay
Inhibition of RSK4 kinase domain 1 (unknown origin) expressed in human HEK293 cells incubated for 2 hrs followed by NanoBRET NanoGlo Substrate addition by NanoBRET assay
|
[PMID: 31702918] |
| HEK293 | IC50 |
3 μM
Compound: 93; SR-318
|
Inhibition of DDR1 (unknown origin) expressed in human HEK293 cells incubated for 2 hrs followed by NanoBRET NanoGlo Substrate addition by NanoBRET assay
Inhibition of DDR1 (unknown origin) expressed in human HEK293 cells incubated for 2 hrs followed by NanoBRET NanoGlo Substrate addition by NanoBRET assay
|
[PMID: 31702918] |
| HEK293 | IC50 |
5.6 μM
Compound: 93; SR-318
|
Inhibition of DDR2 (unknown origin) expressed in human HEK293 cells incubated for 2 hrs followed by NanoBRET NanoGlo Substrate addition by NanoBRET assay
Inhibition of DDR2 (unknown origin) expressed in human HEK293 cells incubated for 2 hrs followed by NanoBRET NanoGlo Substrate addition by NanoBRET assay
|
[PMID: 31702918] |
| HEK293 | IC50 |
8.5 μM
Compound: 93; SR-318
|
Inhibition of KIT (unknown origin) expressed in human HEK293 cells incubated for 2 hrs followed by NanoBRET NanoGlo Substrate addition by NanoBRET assay
Inhibition of KIT (unknown origin) expressed in human HEK293 cells incubated for 2 hrs followed by NanoBRET NanoGlo Substrate addition by NanoBRET assay
|
[PMID: 31702918] |
SR-318 presents a potent and selective type-II inhibitor of p38α/β that can be used as a chemical probe for targeting this particular inactive state of these two p38 isoforms[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 2413286-32-3
-
Appearance Solid
-
Molecular Weight 459.58
-
Formula C27H33N5O2
-
Color White to off-white
-
SMILES
O=C(C1=C(N)N(C2=CC=CC=C2)N=C1)NCC3=CC=C(C(NCCCC4CCCCC4)=O)C=C3
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Nat Commun
Human iPSC-based Modeling of Pulmonary Fibrosis Reveals p300/CBP Inhibition Suppresses Alveolar Transitional Cell State. [Abstract]2026 Feb 12;17(1):1214. PMID: 41680175
Solvent & Solubility
DMSO : 125 mg/mL (271.99 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (4.53 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (4.53 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (270 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.1759 mL | 10.8795 mL | 21.7590 mL | 54.3975 mL |
| 5 mM | 0.4352 mL | 2.1759 mL | 4.3518 mL | 10.8795 mL | |
| 10 mM | 0.2176 mL | 1.0879 mL | 2.1759 mL | 5.4397 mL | |
| 15 mM | 0.1451 mL | 0.7253 mL | 1.4506 mL | 3.6265 mL | |
| 20 mM | 0.1088 mL | 0.5440 mL | 1.0879 mL | 2.7199 mL | |
| 25 mM | 0.0870 mL | 0.4352 mL | 0.8704 mL | 2.1759 mL | |
| 30 mM | 0.0725 mL | 0.3626 mL | 0.7253 mL | 1.8132 mL | |
| 40 mM | 0.0544 mL | 0.2720 mL | 0.5440 mL | 1.3599 mL | |
| 50 mM | 0.0435 mL | 0.2176 mL | 0.4352 mL | 1.0879 mL | |
| 60 mM | 0.0363 mL | 0.1813 mL | 0.3626 mL | 0.9066 mL | |
| 80 mM | 0.0272 mL | 0.1360 mL | 0.2720 mL | 0.6800 mL | |
| 100 mM | 0.0218 mL | 0.1088 mL | 0.2176 mL | 0.5440 mL |