Simufilam hydrochloride
Based on 1 publication(s) in Google Scholar
Simufilam hydrochloride (PTI-125 hydrochloride) is an orally active FLNA modulator. Simufilam hydrochloride restores NMDAR signaling and Arc expression. Simufilam hydrochloride inhibits overactive mTOR signaling by restoring the normal conformation of FLNA, improves insulin sensitivity, reduces Aβ42-induced neuroinflammation and tau protein hyperphosphorylation. Simufilam hydrochloride can be used for research of Alzheimer's disease.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.85%
- CAS. Nr.: 2480226-07-9
- Formel: C15H22ClN3O
- Molecular Weight:295.81
-
Speicherung:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications Citing Use of MedChemExpress (MCE) Simufilam hydrochloride
MoreAlle iGluR Isoform-spezifische Produkte anzeigen
More
Biologische Aktivität
Simufilam (1 nM; 1 h) hydrochloride reduces FLNA-α7nAChR/TLR4 associations, dissociates Aβ42-α7nAChR complexes, restores α7nAChR/NMDAR/IR function, and decreases tau phosphorylation in postmortem human AD brain slices[2].
Simufilam (1 pM-1 nM; 1 h) hydrochloride dose-dependently reduces FLNA-α7nAChR/TLR4 associations, Aβ42-α7nAChR complexes, tau phosphorylation, and tau nitration, while restoring NMDAR signaling and Arc expression in postmortem human AD hippocampal slices[3].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Simufilam hydrochloride (30 mg/kg/d; p.o.; 2 months) reduces FLNA-α7nAChR/TLR4 associations, tau phosphorylation, Aβ42 deposits, and NFTs, improves NMDAR/IR function and synaptic plasticity, and enhances spatial/working memory and nesting behavior in 3xTg AD mice[3].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS. Nr. 2480226-07-9
-
Appearance Solid
-
Molecular Weight 295.81
-
Formel C15H22ClN3O
-
Color White to off-white
-
SMILES
O=C1N(CC2=CC=CC=C2)C3(CCN(C)CC3)NC1.[H]Cl
-
Synonyms
PTI-125 hydrochloride
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
J Neurooncol
Single-cell RNA-seq reveals diverse molecular signatures associated with Methotrexate resistance in primary central nervous system lymphoma cells. [Abstract]2025 Mar;172(1):163-173. PMID: 39636551
Lösungsmittel & Löslichkeit
DMSO : 125 mg/mL (422.57 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 100 mg/mL (338.05 mM; Need ultrasonic)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (8.45 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (8.45 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Reinheit & Dokumentation
-
Data Sheet (277 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
Verweise
[1]. Wang HY, et al. Simufilam suppresses overactive mTOR and restores its sensitivity to insulin in Alzheimer's disease patient lymphocytes. Front Aging. 2023 Jun 29;4:1175601. [Content Brief]
[2]. Wang HY, et al. Reducing amyloid-related Alzheimer's disease pathogenesis by a small molecule targeting filamin A. J Neurosci. 2012 Jul 18;32(29):9773-84. [Content Brief]
[3]. Wang HY, et al. PTI-125 binds and reverses an altered conformation of filamin A to reduce Alzheimer's disease pathogenesis. Neurobiol Aging. 2017 Jul;55:99-114. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 3.3805 mL | 16.9027 mL | 33.8055 mL | 84.5137 mL |
| 5 mM | 0.6761 mL | 3.3805 mL | 6.7611 mL | 16.9027 mL | |
| 10 mM | 0.3381 mL | 1.6903 mL | 3.3805 mL | 8.4514 mL | |
| 15 mM | 0.2254 mL | 1.1268 mL | 2.2537 mL | 5.6342 mL | |
| 20 mM | 0.1690 mL | 0.8451 mL | 1.6903 mL | 4.2257 mL | |
| 25 mM | 0.1352 mL | 0.6761 mL | 1.3522 mL | 3.3805 mL | |
| 30 mM | 0.1127 mL | 0.5634 mL | 1.1268 mL | 2.8171 mL | |
| 40 mM | 0.0845 mL | 0.4226 mL | 0.8451 mL | 2.1128 mL | |
| 50 mM | 0.0676 mL | 0.3381 mL | 0.6761 mL | 1.6903 mL | |
| 60 mM | 0.0563 mL | 0.2817 mL | 0.5634 mL | 1.4086 mL | |
| 80 mM | 0.0423 mL | 0.2113 mL | 0.4226 mL | 1.0564 mL | |
| 100 mM | 0.0338 mL | 0.1690 mL | 0.3381 mL | 0.8451 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.