Remlifanserin
Based on 1 Customer Validation
Remlifanserin (ACP-204) is a highly selective 5-HT2A inverse agonist. Remlifanserin is applicable to research related to Alzheimer's disease psychosis.
商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。
- 純度: 98.29%
- CAS 番号: 2289704-13-6
- 分子式: C24H29F2N3O2
- 分子量:429.50
-
保管条件:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
5-HT Receptor アイソフォーム固有の製品をすべて表示
More
生物活性
|
5-HT2A Receptor |
Remlifanserin modulates symptoms of AD and indirectly alleviates neuroinflammation and oxidative stress responses[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
化学情報
-
CAS 番号 2289704-13-6
-
性状 Solid
-
分子量 429.50
-
分子式 C24H29F2N3O2
-
Color White to off-white
-
SMILES
O=C(N(C1CCN(CC1)C)CC2=CC=C(C=C2F)F)NCC3=CC=C(C=C3)OC4CC4
-
別名
ACP-204
-
輸送条件
Room temperature in continental US; may vary elsewhere.
-
保管条件
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
溶剤 & 溶解度
DMSO : 200 mg/mL (465.66 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (11.64 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
純度とドキュメンテーション
-
データシート (269 KB)
-
SDS (254 KB)
- English - EN (254 KB)
- Français - FR (254 KB)
- Deutsch - DE (254 KB)
- Norwegian - NO (254 KB)
- Español - ES (254 KB)
- Swedish - SV (254 KB)
- Italian - IT (254 KB)
- Korean - KR (254 KB)
- Portuguese - PT (254 KB)
-
取扱説明書 (2659 KB)
参考文献
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3283 mL | 11.6414 mL | 23.2829 mL | 58.2072 mL |
| 5 mM | 0.4657 mL | 2.3283 mL | 4.6566 mL | 11.6414 mL | |
| 10 mM | 0.2328 mL | 1.1641 mL | 2.3283 mL | 5.8207 mL | |
| 15 mM | 0.1552 mL | 0.7761 mL | 1.5522 mL | 3.8805 mL | |
| 20 mM | 0.1164 mL | 0.5821 mL | 1.1641 mL | 2.9104 mL | |
| 25 mM | 0.0931 mL | 0.4657 mL | 0.9313 mL | 2.3283 mL | |
| 30 mM | 0.0776 mL | 0.3880 mL | 0.7761 mL | 1.9402 mL | |
| 40 mM | 0.0582 mL | 0.2910 mL | 0.5821 mL | 1.4552 mL | |
| 50 mM | 0.0466 mL | 0.2328 mL | 0.4657 mL | 1.1641 mL | |
| 60 mM | 0.0388 mL | 0.1940 mL | 0.3880 mL | 0.9701 mL | |
| 80 mM | 0.0291 mL | 0.1455 mL | 0.2910 mL | 0.7276 mL | |
| 100 mM | 0.0233 mL | 0.1164 mL | 0.2328 mL | 0.5821 mL |