Doripenem monohydrate
Based on 7 publication(s) in Google Scholar
Doripenem (S 4661) monohydrate, a 1β-methyl parenteral carbapenem, has very broad-spectrum activity against Gram-positive and Gram-negative aerobic bacteria.
For research use only. We do not sell to patients.
- Purity: 99.86%
- CAS No.: 364622-82-2
- Formula: C15H26N4O7S2
- Molecular Weight:438.52
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
Publications Citing Use of MedChemExpress (MCE) Doripenem monohydrate
More- Molecules. 2025 Mar 9;30(6):1224. [Abstract]
- Antimicrob Agents Chemother. 2023 Jun 15;67(6):e0160322. [Abstract]
- Antimicrob Agents Chemother. 2018 May 25;62(6):e00282-18. [Abstract]
- J Antimicrob Chemother. 2025 Nov 5:dkaf408. [Abstract]
- Microbiol Spectr. 2023 Jun 15;11(3):e0069223. [Abstract]
- Microbiol Spectr. 2023 Feb 14;11(1):e0303822. [Abstract]
- Biomed Res Int. 2018 Jul 2:2018:3579832. [Abstract]
All Antibiotic Isoforms
More
Biological Activity
|
β-lactam |
Doripenem (10, 50, 150 mg/kg; 0.2-ml volumes; subcutaneously 2 h) monohydrate has a T1/2 of 0.41 hours, a CL of 673.9 mL/h•kg for mice with 10 mg/kg[1].
Pharmacokinetic Parameters of Doripenem in mice[1].
| SC (10 mg/kg) | SC (50 mg/kg) | SC (150 mg/kg) | |
| Tmax (h) | 0.25 | 0.38 | 0.22 |
| Cmax (μg/mL) | 16.3 | 59.7 | 194.4 |
| AUC0-24 (ng∗h /mL) | 13.5 | 62.4 | 168 |
| t1/2 (h) | 0.41 | 0.34 | 0.44 |
| CL (mL/h/kg) | 673.9 | 783.3 | 850.5 |
| V (mL/kg) | 400.7 | 384.7 | 545.8 |
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Specific-pathogen-free, female ICR mice weighing approximately 25 g with P. aeruginosa-infected thighs[1]
-
Dosage:MIC range of 2 to 16 μg/ml
-
Administration:Subcutaneous; 1-h and 4-h infusion; 0.2 ml injections
-
Result:Demonstrated antibacterial killing for P. aeruginosa.
Chemical Information
-
CAS No. 364622-82-2
-
Appearance Solid
-
Molecular Weight 438.52
-
Formula C15H26N4O7S2
-
Color Light yellow to yellow
-
SMILES
O=C(C(N12)=C(S[C@@H]3CN[C@H](CNS(=O)(N)=O)C3)[C@H](C)[C@]2([H])[C@@H]([C@H](O)C)C1=O)O.O
-
Synonyms
S 4661 monohydrate
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (7)
-
Journal Impact Factor
-
Most Recent
-
Molecules
Seeking Correlation Among Porin Permeabilities and Minimum Inhibitory Concentrations Through Machine Learning: A Promising Route to the Essential Molecular Descriptors. [Abstract]2025 Mar 9;30(6):1224. PMID: 40142001 -
Antimicrob Agents Chemother
Penicillin-Binding Protein 5/6 Acting as a Decoy Target in Pseudomonas aeruginosa Identified by Whole-Cell Receptor Binding and Quantitative Systems Pharmacology. [Abstract]2023 Jun 15;67(6):e0160322. PMID: 37199612 -
Antimicrob Agents Chemother
First Penicillin-Binding Protein Occupancy Patterns of β-Lactams and β-Lactamase Inhibitors in Klebsiella pneumoniae. [Abstract]2018 May 25;62(6):e00282-18. PMID: 29712652 -
J Antimicrob Chemother
Unravelling the triad of penicillin-binding proteins, β-lactamase activity, and mRNA dynamics in Pseudomonas aeruginosa AmpC induction. [Abstract]2025 Nov 5:dkaf408. PMID: 41206063 -
Microbiol Spectr
Penicillin-Binding Protein Occupancy Dataset for 18 β-Lactams and 4 β-Lactamase Inhibitors in Neisseria gonorrhoeae. [Abstract]2023 Jun 15;11(3):e0069223. PMID: 37093051 -
Microbiol Spectr
PBP Target Profiling by β-Lactam and β-Lactamase Inhibitors in Intact Pseudomonas aeruginosa: Effects of the Intrinsic and Acquired Resistance Determinants on the Periplasmic Drug Availability. [Abstract]2023 Feb 14;11(1):e0303822. PMID: 36475840 -
Biomed Res Int
In Vitro Activity of β-Lactams in Combination with β-Lactamase Inhibitors against Mycobacterium tuberculosis Clinical Isolates. [Abstract]2018 Jul 2:2018:3579832. PMID: 30065936
Solvent & Solubility
DMSO : 50 mg/mL (114.02 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 10 mg/mL (22.80 mM; Need ultrasonic)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 3 mg/mL (6.84 mM); Clear solution
This protocol yields a clear solution of ≥ 3 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (30.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 3 mg/mL (6.84 mM); Clear solution
This protocol yields a clear solution of ≥ 3 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (30.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 33.33 mg/mL (76.01 mM); Clear solution; Need ultrasonic
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (280 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
[1]. Aryun Kim, et al. In vivo pharmacodynamic profiling of doripenem against Pseudomonas aeruginosa by simulating human exposures. Antimicrob Agents Chemother. 2008 Jul;52(7):2497-502. [Content Brief]
[2]. Jones RN, et al. Doripenem (S-4661), a novel carbapenem: comparative activity against contemporary pathogens including bactericidal action and preliminary in vitro methods evaluations. J Antimicrob Chemother. 2004 Jul;54(1):144-54. Epub 2004 Jun 9. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 2.2804 mL | 11.4020 mL | 22.8040 mL | 57.0099 mL |
| 5 mM | 0.4561 mL | 2.2804 mL | 4.5608 mL | 11.4020 mL | |
| 10 mM | 0.2280 mL | 1.1402 mL | 2.2804 mL | 5.7010 mL | |
| 15 mM | 0.1520 mL | 0.7601 mL | 1.5203 mL | 3.8007 mL | |
| 20 mM | 0.1140 mL | 0.5701 mL | 1.1402 mL | 2.8505 mL | |
| DMSO | 25 mM | 0.0912 mL | 0.4561 mL | 0.9122 mL | 2.2804 mL |
| 30 mM | 0.0760 mL | 0.3801 mL | 0.7601 mL | 1.9003 mL | |
| 40 mM | 0.0570 mL | 0.2850 mL | 0.5701 mL | 1.4252 mL | |
| 50 mM | 0.0456 mL | 0.2280 mL | 0.4561 mL | 1.1402 mL | |
| 60 mM | 0.0380 mL | 0.1900 mL | 0.3801 mL | 0.9502 mL | |
| 80 mM | 0.0285 mL | 0.1425 mL | 0.2850 mL | 0.7126 mL | |
| 100 mM | 0.0228 mL | 0.1140 mL | 0.2280 mL | 0.5701 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.