Procyclidine hydrochloride
Based on 1 Customer Validation
Procyclidine (Tricyclamol, (±)-Procyclidine) hydrochloride , an anticholinergic agent, is a muscarinic receptor antagonist that also has the properties of an N-methyl-D-aspartate (NMDA) antagonist. Procyclidine hydrochloride can be used in studies of Parkinson's disease and related psychiatric disorders such as Soman-induced epilepsy.
For research use only. We do not sell to patients.
- Purity: 98.11%
- CAS No.: 1508-76-5
- Formula: C19H30ClNO
- Molecular Weight:323.90
-
Storage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
All iGluR Isoforms
More
Biological Activity
|
NMDA Receptor |
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Male Sprague-Dawley rats, Dunkin-Hartley male guinea pigs[1]
-
Dosage:0.3-6.0 mg/kg
-
Administration:Subcutaneous injection; once
-
Result:Increased protection, resulting in 1.92, 2.24, 3.95 and 5.07 fold in rats, 3.00, 3.25, 4.50 and 4.70 fold in guinea pigs at the doses of 0.3, 1.0, 3.0 or 6.0 mg/kg, respectively.
Protected the neurological integrity of the brain and prevented Soman-induced severe brain damage in the hippocampus, cortex, amygdala and thalamus.
Chemical Information
-
CAS No. 1508-76-5
-
Appearance Solid
-
Molecular Weight 323.90
-
Formula C19H30ClNO
-
Color White to off-white
-
SMILES
OC(C1=CC=CC=C1)(C2CCCCC2)CCN3CCCC3.[H]Cl
-
Synonyms
Tricyclamol hydrochloride; (±)-Procyclidine hydrochloride
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvent & Solubility
DMSO : 50 mg/mL (154.37 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 5.56 mg/mL (17.17 mM; ultrasonic and warming and heat to 60°C)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (7.72 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (6.42 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (276 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
[1]. Yun-Bae Kim, et al. Effects of combinational prophylactics composed of physostigmine and procyclidine on soman-induced lethality, seizures and brain injuries. Environ Toxicol Pharmacol. 2002 Jan;11(1):15-21. [Content Brief]
[2]. Ulrich Ettinger, et al. Effects of procyclidine on eye movements in schizophrenia. Neuropsychopharmacology. 2003 Dec;28(12):2199-208. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 3.0874 mL | 15.4369 mL | 30.8737 mL | 77.1843 mL |
| 5 mM | 0.6175 mL | 3.0874 mL | 6.1747 mL | 15.4369 mL | |
| 10 mM | 0.3087 mL | 1.5437 mL | 3.0874 mL | 7.7184 mL | |
| 15 mM | 0.2058 mL | 1.0291 mL | 2.0582 mL | 5.1456 mL | |
| DMSO | 20 mM | 0.1544 mL | 0.7718 mL | 1.5437 mL | 3.8592 mL |
| 25 mM | 0.1235 mL | 0.6175 mL | 1.2349 mL | 3.0874 mL | |
| 30 mM | 0.1029 mL | 0.5146 mL | 1.0291 mL | 2.5728 mL | |
| 40 mM | 0.0772 mL | 0.3859 mL | 0.7718 mL | 1.9296 mL | |
| 50 mM | 0.0617 mL | 0.3087 mL | 0.6175 mL | 1.5437 mL | |
| 60 mM | 0.0515 mL | 0.2573 mL | 0.5146 mL | 1.2864 mL | |
| 80 mM | 0.0386 mL | 0.1930 mL | 0.3859 mL | 0.9648 mL | |
| 100 mM | 0.0309 mL | 0.1544 mL | 0.3087 mL | 0.7718 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.