Benpyrine
Based on 3 publication(s) in Google Scholar
Benpyrine is a highly specific and orally active TNF-α inhibitor with a KD value of 82.1 μM. Benpyrine tightly binds to TNF-α and blocks its interaction with TNFR1, with an IC50 value of 0.109 µM. Benpyrine has the potential for TNF-α mediated inflammatory and autoimmune disease research.
For research use only. We do not sell to patients.
- Purity: 99.26%
- CAS No.: 2550398-89-3
- Formula: C16H16N6O
- Molecular Weight:308.34
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
Publications Citing Use of MedChemExpress (MCE) Benpyrine
More
Biological Activity
KD: 82.1 μM (TNF-α)[1]
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| RAW264.7 | IC50 |
>100 μM
Compound: 7
|
Toxicity in mouse RAW264.7 cells at 5 to 20 uM
Toxicity in mouse RAW264.7 cells at 5 to 20 uM
|
[PMID: 32667202] |
Benpyrine (5-20 μM; 14 hours; RAW264.7 cells) pretreatment results in a dose-dependent decrease in the phosphorylation of IκBα in RAW264.7 cells (stimulated with 10 ng/mL TNF-α or 1 μg/mL LPS). Benpyrine abolishes the TNF-α-induced nuclear translocation of NF-κB/p65 in RAW264.7 cells[1].
?
Benpyrine only blocks cell death induced by TNF-αWT and Y119A, and increases the cell survival rate up to 80%. Benpyrine does not obviously affect L57A- and Y59L-induced cytotoxicity in L929 cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:RAW264.7 cells
-
Concentration:5 µM, 10 µM, 20 µM
-
Incubation Time:14 hours
-
Result:Resulted in a dose-dependent decrease in the phosphorylation of IκBα.
? Endotoxemia murine model shows that Benpyrine (25 mg/kg) could attenuate TNF-α-induced inflammation, thereby reducing liver and lung injury[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Balb/c mice (18-20 g) injected with collagen[1]
-
Dosage:25 mg/kg, 50 mg/kg
-
Administration:Oral gavage; daily; for 2 weeks
-
Result:Relieved the symptoms of collagen-induced arthritis in mice.
Chemical Information
-
CAS No. 2550398-89-3
-
Appearance Solid
-
Molecular Weight 308.34
-
Formula C16H16N6O
-
Color White to yellow
-
SMILES
O=C(N(CC1=CC=CC=C1)C2)C[C@@H]2NC3=C4C(NC=N4)=NC=N3
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (3)
-
Journal Impact Factor
-
Most Recent
-
Leukemia
Leukemia-driven expansion of type 3 innate lymphoid cell facilitates a pro-tumoral microenvironment in acute myeloid leukemia. [Abstract]2025 Dec 22. PMID: 41430399 -
Aging (Albany NY)
SCFAs promote intestinal double-negative T cells to regulate the inflammatory response mediated by NLRP3 inflammasome. [Abstract]2021 Sep 7;13(17):21470-21482. PMID: 34491906 -
Solvent & Solubility
DMSO : 12.5 mg/mL (40.54 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1.25 mg/mL (4.05 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 1.25 mg/mL (4.05 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (280 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.2432 mL | 16.2159 mL | 32.4317 mL | 81.0793 mL |
| 5 mM | 0.6486 mL | 3.2432 mL | 6.4863 mL | 16.2159 mL | |
| 10 mM | 0.3243 mL | 1.6216 mL | 3.2432 mL | 8.1079 mL | |
| 15 mM | 0.2162 mL | 1.0811 mL | 2.1621 mL | 5.4053 mL | |
| 20 mM | 0.1622 mL | 0.8108 mL | 1.6216 mL | 4.0540 mL | |
| 25 mM | 0.1297 mL | 0.6486 mL | 1.2973 mL | 3.2432 mL | |
| 30 mM | 0.1081 mL | 0.5405 mL | 1.0811 mL | 2.7026 mL | |
| 40 mM | 0.0811 mL | 0.4054 mL | 0.8108 mL | 2.0270 mL |