Erythromycylamine
Based on 1 Customer Validation
Erythromycylamine is a macrolide antibiotic. Erythromycylamine has antibacterial activity against most Gram-positive cocci and M. catarrhalis.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 97.0%
- CAS. Nr.: 26116-56-3
- Formel: C37H70N2O12
- Molecular Weight:734.96
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Alle Antibiotic Isoform-spezifische Produkte anzeigen
More
Biologische Aktivität
Chemical Information
-
CAS. Nr. 26116-56-3
-
Appearance Solid
-
Molecular Weight 734.96
-
Formel C37H70N2O12
-
Color White to off-white
-
SMILES
C[C@@H]([C@@H]([C@H](C(O[C@@H]([C@@](O)([C@@H]([C@H]([C@H]([C@@H](C[C@]1(O)C)C)N)C)O)C)CC)=O)C)O[C@H]2C[C@](C)([C@H]([C@@H](O2)C)O)OC)[C@H]1O[C@H]3[C@@H]([C@H](C[C@H](O3)C)N(C)C)O
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (136.06 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (3.40 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (3.40 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (280 KB)
-
SDS (396 KB)
- English - EN (396 KB)
- Français - FR (396 KB)
- Deutsch - DE (396 KB)
- Norwegian - NO (396 KB)
- Español - ES (396 KB)
- Swedish - SV (396 KB)
- Italian - IT (396 KB)
- Korean - KR (396 KB)
- Portuguese - PT (396 KB)
-
Handling Instructions (2659 KB)
Verweise
[1]. Naik S, et al. In vitro activities of several new macrolide antibiotics against Mycobacterium avium complex. Antimicrob Agents Chemother. 1989 Sep;33(9):1614-6. [Content Brief]
[2]. Fernandes CJ, et al. Multi-centre collaborative study for the in vitro evaluation of new macrolides dirithromycin and erythromycylamine. Australian Group for Antimicrobial Resistance (AGAR). Pathology. 1995 Jan;27(1):74-8. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.3606 mL | 6.8031 mL | 13.6062 mL | 34.0155 mL |
| 5 mM | 0.2721 mL | 1.3606 mL | 2.7212 mL | 6.8031 mL | |
| 10 mM | 0.1361 mL | 0.6803 mL | 1.3606 mL | 3.4015 mL | |
| 15 mM | 0.0907 mL | 0.4535 mL | 0.9071 mL | 2.2677 mL | |
| 20 mM | 0.0680 mL | 0.3402 mL | 0.6803 mL | 1.7008 mL | |
| 25 mM | 0.0544 mL | 0.2721 mL | 0.5442 mL | 1.3606 mL | |
| 30 mM | 0.0454 mL | 0.2268 mL | 0.4535 mL | 1.1338 mL | |
| 40 mM | 0.0340 mL | 0.1701 mL | 0.3402 mL | 0.8504 mL | |
| 50 mM | 0.0272 mL | 0.1361 mL | 0.2721 mL | 0.6803 mL | |
| 60 mM | 0.0227 mL | 0.1134 mL | 0.2268 mL | 0.5669 mL | |
| 80 mM | 0.0170 mL | 0.0850 mL | 0.1701 mL | 0.4252 mL | |
| 100 mM | 0.0136 mL | 0.0680 mL | 0.1361 mL | 0.3402 mL |