BMS-986202
Based on 1 publication(s) in Google Scholar
BMS-986202 is a potent, selective and orally active Tyk2 inhibitor that binds to Tyk2 JH2 with an IC50 value of 0.19 nM and a Ki of 0.02 nM. BMS-986202 is remarkably selective over other kinases including Jak family members. BMS-986202 is also a weak inhibitor of CYP2C19 with an IC50 value of 14 μM. BMS-986202 can be used for IL-23-driven acanthosis, anti-CD40-induced colitis, and spontaneous lupus research. BMS-986202 is a de novo deuterium.
For research use only. We do not sell to patients.
- Purity: 99.29%
- CAS No.: 1771691-34-9
- Formula: C22H18D3FN6O3
- Molecular Weight:439.46
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) BMS-986202
More
Biological Activity
|
Tyk2 JH2 0.19 nM (IC50) |
Tyk2 JH2 0.02 nM (Ki) |
CYP2C19 14 μM (IC50) |
Stable heavy isotopes of hydrogen, carbon, and other elements have been incorporated into drug molecules, largely as tracers for quantitation during the drug development process. Deuteration has gained attention because of its potential to affect the pharmacokinetic and metabolic profiles of drugs[1].
Potential advantages of deuterated compounds:
(1) Extend the half-life in vivo. Deuterated compounds may be able to prolong the pharmacokinetic characteristics of the compound, that is, prolong the half-life in vivo. This can improve compound safety, efficacy and tolerability, and increase ease of administration.
(2) Improve oral bioavailability. Deuterated compounds may reduce the degree of unwanted metabolism (first-pass metabolism) in the gut wall and liver, allowing a greater proportion of the unmetabolized drug to reach its target site of action. High bioavailability determines its activity at low doses and better tolerance.
(3) Improve metabolic characteristics. Deuterated compounds may reduce the formation of toxic or reactive metabolites and improve drug metabolism.
(4) Improve drug safety. Deuterated compounds may reduce or eliminate adverse side effects of pharmaceutical compounds and are safe.
(5) Preserve the therapeutic properties. Deuterated compounds are expected to retain similar biochemical potency and selectivity to hydrogen analogs in previous studies.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
BMS-986202 (Compound 7; 0.4-10 mg/kg; p.o.) treatment inhibits IL-12/IL-18-induced IFNγ production in mice. BMS-986202 dose-dependently inhibits IFNγ production by 46% and 80% at doses of 2 mg/kg and 10 mg/kg, respectively[1].
BMS-986202 (Compound 7; 7-10 mg/kg; p.o.) is stable in liver microsomes, with half lives of greater than 120 min in mouse, rat, monkey, and humans and 89 min in dog. The serum protein binding for BMS-986202 in these species ranges from 89.3% to 96.0%, leaving a good range of free fraction of drug available. BMS-986202 shows the oral bioavailability up to 62-100%[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:C57BL/6 female mice (9-11 weeks) injected with IL-23[1]
-
Dosage:3 mg/kg, 10 mg/kg, and 30 mg/kg
-
Administration:Oral administration; daily; for 9 days
-
Result:Inhibited ear swelling in a dose-responsive manner in IL-23-induced acanthosis in mice.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
1. This compound can be used as a tracer
2. This compound can be used as an internal standard for quantitative analysis by NMR, GC-MS, or LC-MS.
Chemical Information
-
CAS No. 1771691-34-9
-
Unlabeled Cas 2892337-22-1
-
Appearance Solid
-
Molecular Weight 439.46
-
Formula C22H18D3FN6O3
-
Color White to yellow
-
SMILES
O=C(NC1=NC=C(C(NC2=CC=CC(C3=NC=C(C=N3)F)=C2OC)=C1)C(NC([2H])([2H])[2H])=O)C4CC4
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (1)
-
Journal Impact Factor
-
Most Recent
Solvent & Solubility
DMSO : 250 mg/mL (568.88 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (4.73 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (277 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.2755 mL | 11.3776 mL | 22.7552 mL | 56.8880 mL |
| 5 mM | 0.4551 mL | 2.2755 mL | 4.5510 mL | 11.3776 mL | |
| 10 mM | 0.2276 mL | 1.1378 mL | 2.2755 mL | 5.6888 mL | |
| 15 mM | 0.1517 mL | 0.7585 mL | 1.5170 mL | 3.7925 mL | |
| 20 mM | 0.1138 mL | 0.5689 mL | 1.1378 mL | 2.8444 mL | |
| 25 mM | 0.0910 mL | 0.4551 mL | 0.9102 mL | 2.2755 mL | |
| 30 mM | 0.0759 mL | 0.3793 mL | 0.7585 mL | 1.8963 mL | |
| 40 mM | 0.0569 mL | 0.2844 mL | 0.5689 mL | 1.4222 mL | |
| 50 mM | 0.0455 mL | 0.2276 mL | 0.4551 mL | 1.1378 mL | |
| 60 mM | 0.0379 mL | 0.1896 mL | 0.3793 mL | 0.9481 mL | |
| 80 mM | 0.0284 mL | 0.1422 mL | 0.2844 mL | 0.7111 mL | |
| 100 mM | 0.0228 mL | 0.1138 mL | 0.2276 mL | 0.5689 mL |
BMS-986202 Related Classifications
HY-131968 Related Classifications
Powered by Bioz