VF dsDNA Green Dye

1. Product Introduction
This product is a solution prepared with anhydrous DMSO. For a reaction volume of 200 μL, the 0.1 mL specification can detect 200 samples; the 1 mL specification can detect 2,000 samples.
2. Reagent Preparation
Dilute the product with 1×TE (10 mM Tris-HCl, 1 mM EDTA, pH 7.5) at a ratio of 1:200.
For a detection system with a final volume of 200 μL, if you need to prepare working solutions for 20 samples, add 10 μL of VF dsDNA Green Dye to 1.99 mL of 1×TE.
Note: Because the reagent is easily adsorbed onto glass surfaces, it should be prepared in a plastic container.
3. Experimental Method
3.1 Preparation of Standard Working Solution
Add purified double-stranded DNA preparation (e.g., Calf thymus DNA (HY-109517)) to 1 mL of ddH2O to prepare a 1 mg/mL standard solution.
3.2 Preparation of Dye Working Solution
Add 5 μL of VF dsDNA Green Dye solution to 995 μL of TE solution.
Note: Dilute VF dsDNA Green Dye 200-fold with 1×TE. Prepare fresh each time and protect from light.
3.3 Standard Solution Dilution
3.3.1 Stock Solution Dilution: Dilute the 1 mg/mL standard solution to 100 ng/mL with TE solution.
3.3.2 Serial Dilution: Add 800 μL (100 ng/mL) of the standard solution to 200 μL of TE solution to obtain a concentration of 80 ng/mL; add 500 μL (80 ng/mL) of the standard solution to 500 μL of TE solution to obtain a concentration of 40 ng/mL; repeat this serial dilution process to prepare 20 ng/mL, 10 ng/mL, 5.0 ng/mL, and 2.5 ng/mL solutions.
3.3.3 Preparation of Standard Curve: Mix 100 μL each of the serially diluted standard solutions and the dye working solution, and incubate at room temperature in the dark for 5 min. The fluorescence value of the sample was detected using a fluorometer with an excitation wavelength of 480 nm and an emission wavelength of 520 nm. A standard curve was prepared by plotting linear regression between the fluorescence intensity corresponding to the concentration (ng/mL) of the standard solution.
3.4 The fluorescence value of the test sample was measured, and the concentration of the test sample was calculated based on the standard curve.

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.