BIIB129
Based on 1 Customer Validation
BIIB129 is a covalent, selective, small molecule inhibitor of Bruton's tyrosine kinase (BTK) capable of penetrating the blood-brain barrier. BIIB129 inhibits the activity of BTK by covalently binding to Cys481 in BTK, thereby affecting the function of B cells and myeloid cells. BIIB129 can be used in multiple sclerosis (MS) research.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.54%
- CAS No.: 2770960-52-4
- Formule: C19H22N6O2
- Masse moléculaire:366.42
-
Stockage:
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Activité biologique
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| Microglia | EC50 |
1.5 mg/kg
Compound: 25; BI1B129
|
Inhibition of po dosed FcR binding anti-MOG antibodies treated mouse microglial proliferation administered twice daily
Inhibition of po dosed FcR binding anti-MOG antibodies treated mouse microglial proliferation administered twice daily
|
[PMID: 38712838] |
| Monocyte | IC50 |
3 nM
Compound: 25; BI1B129
|
Inhibition of FcgammaR-mediated TNF secretion in monocytes (unknown origin)
Inhibition of FcgammaR-mediated TNF secretion in monocytes (unknown origin)
|
[PMID: 38712838] |
| Neutrophil | IC50 |
3.2 nM
Compound: 25; BI1B129
|
Inhibition of FcgammaR-mediated ROS production in neutrophils (unknown origin)
Inhibition of FcgammaR-mediated ROS production in neutrophils (unknown origin)
|
[PMID: 38712838] |
| PBMC | IC50 |
13 nM
Compound: 25; BI1B129
|
Inhibition of anti-IgD induced B-cell activation in human PBMCs
Inhibition of anti-IgD induced B-cell activation in human PBMCs
|
[PMID: 38712838] |
| T-cell | IC50 |
1.9 nM
Compound: 25; BI1B129
|
Inhibition of OVA332 to 339 specific T-cells (unknown origin) proliferation assessed as reduction in B-cell mediated antigen presentation to T cells
Inhibition of OVA332 to 339 specific T-cells (unknown origin) proliferation assessed as reduction in B-cell mediated antigen presentation to T cells
|
[PMID: 38712838] |
| TMD8 | IC50 |
0.82 nM
Compound: 25; BI1B129
|
Inhibition of human TMD8 cells proliferation incubated for 35 to 72 hrs by CellTiter-Glo luminescent cell viability assay
Inhibition of human TMD8 cells proliferation incubated for 35 to 72 hrs by CellTiter-Glo luminescent cell viability assay
|
[PMID: 38712838] |
| TMD8 | IC50 |
7.1 nM
Compound: 25; BI1B129
|
Antiproliferative activity against human TMD8 cells by CellTiter-Glo luminescent cell viability assay
Antiproliferative activity against human TMD8 cells by CellTiter-Glo luminescent cell viability assay
|
[PMID: 38712838] |
Chemical Information
-
CAS No. 2770960-52-4
-
Appearance Solid
-
Masse moléculaire 366.42
-
Formule C19H22N6O2
-
Color White to off-white
-
SMILES
CN(N=C1)C=C1C2=CN3C(C(O[C@]4(C[C@H](C4)N(C)C(C=C)=O)C)=N2)=CC=N3
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Solvant et solubilité
DMSO : 50 mg/mL (136.46 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.82 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (276 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.7291 mL | 13.6455 mL | 27.2911 mL | 68.2277 mL |
| 5 mM | 0.5458 mL | 2.7291 mL | 5.4582 mL | 13.6455 mL | |
| 10 mM | 0.2729 mL | 1.3646 mL | 2.7291 mL | 6.8228 mL | |
| 15 mM | 0.1819 mL | 0.9097 mL | 1.8194 mL | 4.5485 mL | |
| 20 mM | 0.1365 mL | 0.6823 mL | 1.3646 mL | 3.4114 mL | |
| 25 mM | 0.1092 mL | 0.5458 mL | 1.0916 mL | 2.7291 mL | |
| 30 mM | 0.0910 mL | 0.4549 mL | 0.9097 mL | 2.2743 mL | |
| 40 mM | 0.0682 mL | 0.3411 mL | 0.6823 mL | 1.7057 mL | |
| 50 mM | 0.0546 mL | 0.2729 mL | 0.5458 mL | 1.3646 mL | |
| 60 mM | 0.0455 mL | 0.2274 mL | 0.4549 mL | 1.1371 mL | |
| 80 mM | 0.0341 mL | 0.1706 mL | 0.3411 mL | 0.8528 mL | |
| 100 mM | 0.0273 mL | 0.1365 mL | 0.2729 mL | 0.6823 mL |