Lefamulin acetate
Based on 4 publication(s) in Google Scholar
Lefamulin (BC-3781) acetate is an orally active antibiotic. Lefamulin acetate inhibits protein synthesis by binding to the peptidyl transferase center of the 50S bacterial ribosome. Lefamulin acetate has anti-inflammatory activity. Lefamulin acetate can be used in the research of bacterial infections, such as bacterial pneumonia.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.66%
- CAS No.: 1350636-82-6
- Formule: C30H49NO7S
- Masse moléculaire:567.78
-
Stockage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) Lefamulin acetate
MoreVoir tous les produits spécifiques à Isoform Antibiotic
More
Activité biologique
Lefamulin (0-1 mg/L) acetate shows inhibitory activity against C. trachomatis, N. gonorrhoeae, and M. genitalium[2].
Lefamulin acetate shows potent activity against all M. pneumoniae strains with MIC values of ≤0.008 μg/mL[3].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:C. trachomatis, N. gonorrhoeae, and M. genitalium
-
Concentration:0-1 mg/L
-
Incubation Time:
-
Result:Inhibited bacterial activity with MIC50s of 0.02 mg/L, 0.063 mg/L and 0.12 mg/L respectively.
Lefamulin (1.25-160 mg/kg, s.c.) acetate shows antibacterial effect in S. pneumoniae or S. aureus challenged lung infection mice[5].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:LPS-induced lung neutrophilia mouse model[4]
-
Dosage:10-140 mg/kg
-
Administration:Subcutaneous injection (s.c.)
-
Result:Reduced BALF neutrophil cell counts.
Reduced pro-inflammatory cytokine (TNF-α, IL-6, IL-1β, and GM-CSF), chemokine (CXCL-1, CXCL-2, and CCL-2) and MMP-9 levels in mouse lung tissue.
Chemical Information
-
CAS No. 1350636-82-6
-
Appearance Solid
-
Masse moléculaire 567.78
-
Formule C30H49NO7S
-
Color White to off-white
-
SMILES
CC(O)=O.C[C@@H]1[C@]23[C@](C(CC3)=O)([H])[C@]([C@@H](C[C@](C)([C@H]1O)C=C)OC(CS[C@H]4[C@@H](C[C@@H](CC4)N)O)=O)([C@@H](CC2)C)C
-
Synonyms
BC-3781 acetate
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (4)
-
Journal Impact Factor
-
Most Recent
-
Microorganisms
In Vitro Synergistic Effect of Lefamulin with Doxycycline, Rifampin, and Quinupristin/Dalfopristin Against Enterococci. [Abstract]2024 Dec 6;12(12):2515. PMID: 39770718 -
Antimicrob Agents Chemother
2021 Sep 17;65(10):e0061921. PMID: 34252305 -
J Antimicrob Chemother
Phenotypic antibiotic resistance of Mycoplasma genitalium and its variation between different macrolide resistance-associated mutations. [Abstract]2025 Feb 3;80(2):465-471. PMID: 39656801 -
Pathology
In vitro activity of recently introduced Gram-positive-specific antimicrobial agents against Australian methicillin-resistant Staphylococcus aureus isolates. [Abstract]2026 Feb 6:S0031-3025(26)00393-4. PMID: 41760492
Solvant et solubilité
DMSO : ≥ 100 mg/mL (176.12 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : < 0.1 mg/mL (insoluble)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.40 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (4.40 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 2.5 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 100 mg/mL (176.12 mM); Clear solution; Need ultrasonic
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (281 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Veve MP, et al. Lefamulin: Review of a Promising Novel Pleuromutilin Antibiotic. Pharmacotherapy. 2018 Sep;38(9):935-946. doi: 10.1002/phar.2166. Epub 2018 Aug 20. [Content Brief]
[2]. Susanne Paukner, et al. Antimicrob Agents Chemother. 2018 Apr 26;62(5):e02380-17. [Content Brief]
[3]. Ken B Waites, et al. In Vitro Activities of Lefamulin and Other Antimicrobial Agents against Macrolide-Susceptible and Macrolide-Resistant Mycoplasma pneumoniae from the United States, Europe, and China. Antimicrob Agents Chemother. 2017 Jan 24;61(2):e02008-16. [Content Brief]
[4]. Michael Hafner, et al. Anti-inflammatory activity of lefamulin versus azithromycin and dexamethasone in vivo and in vitro in a lipopolysaccharide-induced lung neutrophilia mouse model. PLoS One. 2021 Sep 29;16(9): e0237659. [Content Brief]
[5]. Wolfgang W Wicha, et al. Pharmacokinetics/pharmacodynamics of lefamulin in a neutropenic murine pneumonia model with Staphylococcus aureus and Streptococcus pneumonia. J Antimicrob Chemother. 2019 Apr 1;74(Suppl 3):iii11-iii18. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.7612 mL | 8.8062 mL | 17.6125 mL | 44.0311 mL |
| 5 mM | 0.3522 mL | 1.7612 mL | 3.5225 mL | 8.8062 mL | |
| 10 mM | 0.1761 mL | 0.8806 mL | 1.7612 mL | 4.4031 mL | |
| 15 mM | 0.1174 mL | 0.5871 mL | 1.1742 mL | 2.9354 mL | |
| 20 mM | 0.0881 mL | 0.4403 mL | 0.8806 mL | 2.2016 mL | |
| 25 mM | 0.0704 mL | 0.3522 mL | 0.7045 mL | 1.7612 mL | |
| 30 mM | 0.0587 mL | 0.2935 mL | 0.5871 mL | 1.4677 mL | |
| 40 mM | 0.0440 mL | 0.2202 mL | 0.4403 mL | 1.1008 mL | |
| 50 mM | 0.0352 mL | 0.1761 mL | 0.3522 mL | 0.8806 mL | |
| 60 mM | 0.0294 mL | 0.1468 mL | 0.2935 mL | 0.7339 mL | |
| 80 mM | 0.0220 mL | 0.1101 mL | 0.2202 mL | 0.5504 mL | |
| 100 mM | 0.0176 mL | 0.0881 mL | 0.1761 mL | 0.4403 mL |
Lefamulin acetate Related Classifications
HY-16908A Related Classifications
Powered by Bioz