NVS-CECR2-1
Based on 1 publication(s) in Google Scholar
NVS-CECR2-1, a non-BET family Bromodomain (BRD) inhibitor, is a potent and selective cat eye syndrome chromosome region, candidate 2 (CECR2) inhibitor. NVS-CECR2-1 binds to CECR2 BRD with high affinity (IC50=47 nM; KD=80 nM). NVS-CECR2-1 exhibits cytotoxic activity and induces apoptosis against various cancer cells by targeting CECR2 as well as via CECR2-independent mechanism. NVS-CECR2-1 is a chemical probe.
For research use only. We do not sell to patients.
- Purity: 99.40%
- CAS No.: 1992047-61-6
- Formula: C27H37N5O2S
- Molecular Weight:495.68
-
Storage:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Publications Citing Use of MedChemExpress (MCE) NVS-CECR2-1
More
Biological Activity
|
CECR2 47 nM (IC50) |
CECR2 80 nM (Kd) |
BRD4 >37 μM (IC50) |
BRD7 5.5 μM (IC50) |
BRD9 2.3 μM (IC50) |
NVS-CECR2-1 (1-4 μM; 72 hours) decreases the viability of all cancer cells[1].
NVS-CECR2-1 (1-6 μM; 72 hours) increases apoptosis in a dose-dependent manner[1].
NVS-CECR2-1 (10 μM; 2 hours) inhibits chromatin binding of CECR2 BRD within SW48 cells. NVS-CECR2-1 (5, 10, 15 μM; 2 hours) dissociates CECR2 from chromatin in a dose-dependent manner without affecting BRG1[1].
NVS-CECR2-1 (0.5-4 μM; 10 days) inhibits the clonogenic ability of SW48 cells in a dose dependent manner and its IC50 value is estimated to be 0.64 μM[1].
NVS-CECR2-1 inhibits chromatin binding of CECR2 BRD and displaces CECR2 from chromatin within cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:Colon (SW48, HT29 and HCT116), lung (H460), uroepithelium (SV-HUC-1), cervix (HeLa) and bone (U2OS), human embryonic kidney (HEK) 293 T cells
-
Concentration:1, 1.5, 2, 2.5, 3, 4 μM
-
Incubation Time:72 hours
-
Result:Decreased the viability of all cancer cells analyzed in a dose dependent manner.
Showed a dose-dependent cytotoxicity on HEK 293 T cells.
-
Cell Line:SW48 cells
-
Concentration:0.5, 1, 1.5, 2, 4, 6 μM
-
Incubation Time:72 hours
-
Result:Increased apoptosis in a dose-dependent manner, with more than 80% cells undergoing apoptosis at 6 μM, and had virtually no effect on necrosis.
Chemical Information
-
CAS No. 1992047-61-6
-
Appearance Solid
-
Molecular Weight 495.68
-
Formula C27H37N5O2S
-
Color White to off-white
-
SMILES
CC1(C)CC(N2C=CC3=C2C=CC(C4=CC(NC5CC5)=NC(S(=O)(CCC)=O)=N4)=C3)CC(C)(C)N1
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Nat Commun
Human iPSC-based Modeling of Pulmonary Fibrosis Reveals p300/CBP Inhibition Suppresses Alveolar Transitional Cell State. [Abstract]2026 Feb 12;17(1):1214. PMID: 41680175
Solvent & Solubility
DMSO : 66.67 mg/mL (134.50 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (276 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.0174 mL | 10.0872 mL | 20.1743 mL | 50.4358 mL |
| 5 mM | 0.4035 mL | 2.0174 mL | 4.0349 mL | 10.0872 mL | |
| 10 mM | 0.2017 mL | 1.0087 mL | 2.0174 mL | 5.0436 mL | |
| 15 mM | 0.1345 mL | 0.6725 mL | 1.3450 mL | 3.3624 mL | |
| 20 mM | 0.1009 mL | 0.5044 mL | 1.0087 mL | 2.5218 mL | |
| 25 mM | 0.0807 mL | 0.4035 mL | 0.8070 mL | 2.0174 mL | |
| 30 mM | 0.0672 mL | 0.3362 mL | 0.6725 mL | 1.6812 mL | |
| 40 mM | 0.0504 mL | 0.2522 mL | 0.5044 mL | 1.2609 mL | |
| 50 mM | 0.0403 mL | 0.2017 mL | 0.4035 mL | 1.0087 mL | |
| 60 mM | 0.0336 mL | 0.1681 mL | 0.3362 mL | 0.8406 mL | |
| 80 mM | 0.0252 mL | 0.1261 mL | 0.2522 mL | 0.6304 mL | |
| 100 mM | 0.0202 mL | 0.1009 mL | 0.2017 mL | 0.5044 mL |