AS-604850
Based on 1 publication(s) in Google Scholar
AS-604850 is a potent, selective and ATP-competitive PI3Kγ inhibitor with an IC50 value of 0.25 μM and a Ki value of 0.18 μM. AS-604850 shows isoform selective inhibitor of PI3Kγ with over 30-fold selectivity for PI3Kδ and β, and 18-fold selectivity over PI3Kα, respectively.
For research use only. We do not sell to patients.
- Purity: 99.32%
- CAS No.: 648449-76-7
- Formula: C11H5F2NO4S
- Molecular Weight:285.22
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Publications Citing Use of MedChemExpress (MCE) AS-604850
More
Biological Activity
|
PI3Kγ 0.25 μM (IC50) |
PI3Kγ 0.18 μM (Ki) |
PI3Kα 4.5 μM (IC50) |
AS-604850 inhibits C5a-mediated PKB phosphorylation with an IC50 of 10 μM in RAW264 mouse macrophages[1].
AS-604850 blocks PKB phosphorylation induced by MCP-1 and has little or no effect after stimulation with CSF-1 in in primary monocytes from Pik3cg+/+ or Pik3cg–/– mice[1].
AS-604850 (0-30 μM; 15 minutes; primary monocytes from Pik3cg+/+ mice) treatment inhibits MCP-1-mediated phosphorylation of PKB and its downstream substrates GSK3α andβ in a concentration-dependent manner. MCP-1-induced phosphorylation of p44/42 ERK (ERK1/2) MAPKs is also reduced, in a concentration dependent manner in primary monocytes from Pik3cg+/+ mice[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:Primary monocytes from Pik3cg+/+ mice
-
Concentration:0 μM, 1 μM, 3 μM, 10 μM, 30 μM
-
Incubation Time:15 minutes
-
Result:Inhibited MCP-1-mediated phosphorylation of PKB and its downstream substrates GSK3α andβ in a concentration-dependent manner. MCP-1-induced phosphorylation of p44/42 ERK (ERK1/2) MAPKs was also reduced, in a concentrationdependent manner in primary monocytes from Pik3cg+/+ mice.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Balb/C or C3H mice with human recombinant RANTES or thioglycollate[1]
-
Dosage:10 mg/kg, 30 mg/kg or 100 mg/kg
-
Administration:Oral administration; for 4.5 or 4.25 hours
-
Result:Reduced RANTES-induced peritoneal neutrophil recruitment with an ED50 value of 42.4 mg/kg. In the thioglycollate-induced peritonitis model, resulted in a 31% reduction of neutrophil recruitment.
Chemical Information
-
CAS No. 648449-76-7
-
Appearance Solid
-
Molecular Weight 285.22
-
Formula C11H5F2NO4S
-
Color White to off-white
-
SMILES
O=C(NC/1=O)SC1=C\C2=CC=C(OC(F)(F)O3)C3=C2
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Molecules
In Vitro and in Vivo Activity of mTOR Kinase and PI3K Inhibitors Against Leishmania donovani and Trypanosoma brucei. [Abstract]2020 Apr 23;25(8):1980. PMID: 32340370
Solvent & Solubility
DMSO : 250 mg/mL (876.52 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : < 0.1 mg/mL (insoluble)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (7.29 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (276 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.5061 mL | 17.5303 mL | 35.0607 mL | 87.6516 mL |
| 5 mM | 0.7012 mL | 3.5061 mL | 7.0121 mL | 17.5303 mL | |
| 10 mM | 0.3506 mL | 1.7530 mL | 3.5061 mL | 8.7652 mL | |
| 15 mM | 0.2337 mL | 1.1687 mL | 2.3374 mL | 5.8434 mL | |
| 20 mM | 0.1753 mL | 0.8765 mL | 1.7530 mL | 4.3826 mL | |
| 25 mM | 0.1402 mL | 0.7012 mL | 1.4024 mL | 3.5061 mL | |
| 30 mM | 0.1169 mL | 0.5843 mL | 1.1687 mL | 2.9217 mL | |
| 40 mM | 0.0877 mL | 0.4383 mL | 0.8765 mL | 2.1913 mL | |
| 50 mM | 0.0701 mL | 0.3506 mL | 0.7012 mL | 1.7530 mL | |
| 60 mM | 0.0584 mL | 0.2922 mL | 0.5843 mL | 1.4609 mL | |
| 80 mM | 0.0438 mL | 0.2191 mL | 0.4383 mL | 1.0956 mL | |
| 100 mM | 0.0351 mL | 0.1753 mL | 0.3506 mL | 0.8765 mL |