SRT 1460
Based on 6 publication(s) in Google Scholar
SRT 1460, a potent Sirtuin-1 (SIRT1) activator with an EC1.5 value of 2.9 μM, shows good selectivity for activation of SIRT1 versus SIRT2 and SIRT3 (EC1.5>300 μM), and is more potent than Resveratrol and the closest sirtuin homologues.
For research use only. We do not sell to patients.
- Purity: 98.16%
- CAS No.: 925432-73-1
- Formula: C26H29N5O4S
- Molecular Weight:507.60
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
Publications Citing Use of MedChemExpress (MCE) SRT 1460
More
Biological Activity
|
SIRT1 2.9 μM (EC1.5) |
SRT 1460 (2-6 μM; 72 hours) inhibits cell viability in a dose-dependent manner, with all pancreatic cancer cells being more sensitive than the control HPDE cell. The IC50s of those cells are: Patu8988t, 1.62±0.13 μM; SU86.86, 2.31±0.23 μM; Panc-1, 0.66 ±0.02 μM; HPDE, 2.39±0.29 μM[2].
SRT 1460 (5 μM; 16 hours) increases expression of the autophagy marker LC3-II[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:Patu8988t (pancreatic cancer cells), Panc-1 (pancreatic cancer cells), SU86.86 (pancreatic cancer cells), HPDE cells
-
Concentration:2 μM, 4 μM, 6 μM
-
Incubation Time:72 hours
-
Result:Inhibited cell viability in a dose-dependent manner, with all pancreatic cancer cells being more sensitive than the control HPDE cell. The IC50s of those cells were: Patu8988t, 1.62±0.13 μM; SU86.86, 2.31±0.23 μM; Panc-1, 0.66 ±0.02 μM; HPDE, 2.39±0.29 μM.
-
Cell Line:Patu8988t cells
-
Concentration:5 μM
-
Incubation Time:16 hours
-
Result:SRT1460 increased expression of the autophagy marker LC3-II.
Chemical Information
-
CAS No. 925432-73-1
-
Appearance Solid
-
Molecular Weight 507.60
-
Formula C26H29N5O4S
-
Color Off-white to light yellow
-
SMILES
O=C(NC1=CC=CC=C1C2=CN3C(SC=C3CN4CCNCC4)=N2)C5=CC(OC)=C(OC)C(OC)=C5
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (6)
-
Journal Impact Factor
-
Most Recent
-
Phytomedicine
Puerarin suppresses macrophage M1 polarization to alleviate renal inflammatory injury through antagonizing TLR4/MyD88-mediated NF-κB p65 and JNK/FoxO1 activation. [Abstract]2024 Sep:132:155813. PMID: 38905846 -
Cell Biol Toxicol
S100A2 activation promotes interstitial fibrosis in kidneys by FoxO1-mediated epithelial-mesenchymal transition. [Abstract]2024 Oct 9;40(1):86. PMID: 39382800 -
Int Immunopharmacol
Fraxetin attenuates DNA damage and inflammation in cisplatin-induced nephrotoxicity via FoxO1 activation. [Abstract]2025 Jan 6:147:114010. PMID: 39765000 -
Eur J Pharmacol
Restoration of ARA metabolic disorders in vascular smooth muscle cells alleviates intimal hyperplasia. [Abstract]2024 Sep 10:176824. PMID: 39265882 -
Cell Signal
Hsa-miR-34a-5p reverses multidrug resistance in gastric cancer cells by targeting the 3'-UTR of SIRT1 and inhibiting its expression. [Abstract]2021 Aug:84:110016. PMID: 33894312 -
J Toxicol
Empagliflozin Alleviates Arsenic Trioxide-Induced Nephrotoxicity by Activating the SIRT1/Akt/Nrf2 Pathway. [Abstract]2026 Feb 13:2026:5808911. PMID: 41695613
Solvent & Solubility
DMSO : 10 mg/mL (19.70 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1.25 mg/mL (2.46 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (280 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
[1]. Milne JC, et al. Small molecule activators of SIRT1 as therapeutics for the treatment of type 2 diabetes. Nature. 2007 Nov 29; 450(7170): 712–716. [Content Brief]
[2]. Chini CC, et al. SIRT1-Activating Compounds (STAC) Negatively Regulate Pancreatic Cancer Cell Growth and Viability Through a SIRT1 Lysosomal-Dependent Pathway. Clin Cancer Res. 2016 May 15;22(10):2496-507. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.9701 mL | 9.8503 mL | 19.7006 mL | 49.2514 mL |
| 5 mM | 0.3940 mL | 1.9701 mL | 3.9401 mL | 9.8503 mL | |
| 10 mM | 0.1970 mL | 0.9850 mL | 1.9701 mL | 4.9251 mL | |
| 15 mM | 0.1313 mL | 0.6567 mL | 1.3134 mL | 3.2834 mL |