Dihydrocoumarin
Based on 1 Customer Validation
Dihydrocoumarin is a compound found in Melilotus officinalis. Dihydrocoumarin is a yeast Sir2p inhibitor. Dihydrocoumarin also inhibits human SIRT1 and SIRT2 with IC50s of 208 μM and 295 μM, respectively.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.68%
- CAS No.: 119-84-6
- Formule: C9H8O2
- Masse moléculaire:148.16
-
Stockage:Pure form -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Activité biologique
|
hSIRT1 208 μM (IC50) |
hSIRT2 295 μM (IC50) |
Dihydrocoumarin induces a concentration-dependent inhibition of SIRT1 (IC50 of 208 μM) in an in vitro enzymatic assay. A decrease in SIRT1 deacetylase activity is observed even at micromolar doses (85±5.8 and 73±13.7% activity at 1.6 μM and 8 μM, respectively). The microtubule SIRT2 deacetylase is also inhibited with a similar dose dependency (IC50 of 295 μM)[1].
Dihydrocoumarin (1-5 mM) increases cytotoxicity in the TK6 cell line in a dose-dependent manner following a 24-h exposure. Dihydrocoumarin (1-5 mM) increases apoptosis in a dose-dependent manner in the TK6 cell line at the 6-h time point. A 5-mM dose of Dihydrocoumarin increases apoptosis at the 6-h time point in the TK6 cell line[1].
Dihydrocoumarin (1-5 mM) increases p53 lysine 373 and 382 acetylation in a dose-dependent manner in the TK6 cell line following a 24-h exposure period[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 119-84-6
-
Appearance Liquid (Density: 1.169 g/cm3)
-
Masse moléculaire 148.16
-
Formule C9H8O2
-
Color Colorless to light yellow
-
SMILES
O=C1CCC2=CC=CC=C2O1
-
Synonyms
Hydrocoumarin; Chroman-2-one
-
Structure Classification
-
Initial Source
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Pure form -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
DMSO : 100 mg/mL (674.95 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (16.87 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (16.87 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (274 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 6.7495 mL | 33.7473 mL | 67.4946 mL | 168.7365 mL |
| 5 mM | 1.3499 mL | 6.7495 mL | 13.4989 mL | 33.7473 mL | |
| 10 mM | 0.6749 mL | 3.3747 mL | 6.7495 mL | 16.8736 mL | |
| 15 mM | 0.4500 mL | 2.2498 mL | 4.4996 mL | 11.2491 mL | |
| 20 mM | 0.3375 mL | 1.6874 mL | 3.3747 mL | 8.4368 mL | |
| 25 mM | 0.2700 mL | 1.3499 mL | 2.6998 mL | 6.7495 mL | |
| 30 mM | 0.2250 mL | 1.1249 mL | 2.2498 mL | 5.6245 mL | |
| 40 mM | 0.1687 mL | 0.8437 mL | 1.6874 mL | 4.2184 mL | |
| 50 mM | 0.1350 mL | 0.6749 mL | 1.3499 mL | 3.3747 mL | |
| 60 mM | 0.1125 mL | 0.5625 mL | 1.1249 mL | 2.8123 mL | |
| 80 mM | 0.0844 mL | 0.4218 mL | 0.8437 mL | 2.1092 mL | |
| 100 mM | 0.0675 mL | 0.3375 mL | 0.6749 mL | 1.6874 mL |
Dihydrocoumarin Related Classifications
HY-N1926 Related Classifications
Powered by Bioz