(rac)-AR-13503
Based on 1 Customer Validation
(rac)-AR-13503 ((rac)-AR-13324 M1 metabolite) is the isoform of AR-13503 (HY-12798C). AR-13503 a ROCK/PKC inhibitor, inhibiting angiogenesis and enhancing retinal pigment epithelium (RPE) permeability. AR-13503 also inhibits the formation of aberrant neovascularization (NV) in oxygen-induced retinopathy (OIR) model in mice.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.08%
- CAS No.: 1254032-16-0
- Formule: C19H19N3O2
- Masse moléculaire:321.37
-
Stockage:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Activité biologique
AR-13503 (16 h) inhibits human umbilical vein endothelial cell (HUVEC) tube formation, with an IC50 value of 21 nM[1].
AR-13503 (400 nM; 5 d) decreases the sprouting area of the choroidal in a dose-dependent manner[1].
AR-13503 (400 nM; 2 weeks) enhances primary porcine RPE barrier function in a dose-dependent manner[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Oxygen-induced retinopathy (OIR) mice model (C57BL/6; 7-days-old)[1]
-
Dosage:1.25 mg/kg
-
Administration:Intraperitoneal injection; once daily for 5 days
-
Result:The combination group had a greater (~75%) reduction in NV than Aflibercept alone (~55%).
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 1254032-16-0
-
Appearance Solid
-
Masse moléculaire 321.37
-
Formule C19H19N3O2
-
Color White to light yellow
-
SMILES
O=C(C(CN)C1=CC=C(CO)C=C1)NC2=CC3=C(C=C2)C=NC=C3
-
Synonyms
(rac)-AR-13324 M1 metabolite
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Solvant et solubilité
DMSO : 40 mg/mL (124.47 mM; ultrasonic and warming and adjust pH to 2 with 1 M HCl and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
1 M HCl : 25 mg/mL (77.79 mM; Need ultrasonic)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 4 mg/mL (12.45 mM); Clear solution
This protocol yields a clear solution of ≥ 4 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (40.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 4 mg/mL (12.45 mM); Clear solution
This protocol yields a clear solution of ≥ 4 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (40.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (272 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| 1 M HCl / DMSO | 1 mM | 3.1117 mL | 15.5584 mL | 31.1168 mL | 77.7920 mL |
| 5 mM | 0.6223 mL | 3.1117 mL | 6.2234 mL | 15.5584 mL | |
| 10 mM | 0.3112 mL | 1.5558 mL | 3.1117 mL | 7.7792 mL | |
| 15 mM | 0.2074 mL | 1.0372 mL | 2.0745 mL | 5.1861 mL | |
| 20 mM | 0.1556 mL | 0.7779 mL | 1.5558 mL | 3.8896 mL | |
| 25 mM | 0.1245 mL | 0.6223 mL | 1.2447 mL | 3.1117 mL | |
| 30 mM | 0.1037 mL | 0.5186 mL | 1.0372 mL | 2.5931 mL | |
| 40 mM | 0.0778 mL | 0.3890 mL | 0.7779 mL | 1.9448 mL | |
| 50 mM | 0.0622 mL | 0.3112 mL | 0.6223 mL | 1.5558 mL | |
| 60 mM | 0.0519 mL | 0.2593 mL | 0.5186 mL | 1.2965 mL | |
| DMSO | 80 mM | 0.0389 mL | 0.1945 mL | 0.3890 mL | 0.9724 mL |
| 100 mM | 0.0311 mL | 0.1556 mL | 0.3112 mL | 0.7779 mL |
(rac)-AR-13503 Related Classifications
HY-125639 Related Classifications
Powered by Bioz