SOD1-Derlin-1 inhibitor-2
Based on 1 Customer Validation
SOD1-Derlin-1 inhibitor-2 (compound 56-59) is an inhibitor of SOD1-Derlin-1 interaction. SOD1-Derlin-1 inhibitor-2 attenuates the interactions between Derlin-1 and SOD1mut. SOD1-Derlin-1 inhibitor-2 can be used for the research of amyotrophic lateral sclerosis (ALS).
For research use only. We do not sell to patients.
- Purity: 99.86%
- CAS No.: 2170170-27-9
- Formula: C22H18N4OS
- Molecular Weight:386.47
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
Biological Activity
SOD1-Derlin-1 inhibitor-2 (compound 56-59; 0.1-100 μM) inhibits the SOD1-Derlin-1 interaction in a dose-dependent manner[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:ALS model C57BL/6 mice[1]
-
Dosage:3 mM, flow rate 0.15 μL/h
-
Administration:intracerebroventrical injection
-
Result:Had significantly delayed onset, by a median of 4.5 weeks (14.5% improvement) and prolonged survival, by a median of 5 weeks (14.2% improvement).
Chemical Information
-
CAS No. 2170170-27-9
-
Appearance Solid
-
Molecular Weight 386.47
-
Formula C22H18N4OS
-
Color Light yellow to yellow
-
SMILES
O=C(C1=C(N)C2=CC=C(C3=CC=CN=C3)N=C2S1)N(C4=CC=CC=C4)CC=C
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 50 mg/mL (129.38 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.47 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (273 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.5875 mL | 12.9376 mL | 25.8752 mL | 64.6881 mL |
| 5 mM | 0.5175 mL | 2.5875 mL | 5.1750 mL | 12.9376 mL | |
| 10 mM | 0.2588 mL | 1.2938 mL | 2.5875 mL | 6.4688 mL | |
| 15 mM | 0.1725 mL | 0.8625 mL | 1.7250 mL | 4.3125 mL | |
| 20 mM | 0.1294 mL | 0.6469 mL | 1.2938 mL | 3.2344 mL | |
| 25 mM | 0.1035 mL | 0.5175 mL | 1.0350 mL | 2.5875 mL | |
| 30 mM | 0.0863 mL | 0.4313 mL | 0.8625 mL | 2.1563 mL | |
| 40 mM | 0.0647 mL | 0.3234 mL | 0.6469 mL | 1.6172 mL | |
| 50 mM | 0.0518 mL | 0.2588 mL | 0.5175 mL | 1.2938 mL | |
| 60 mM | 0.0431 mL | 0.2156 mL | 0.4313 mL | 1.0781 mL | |
| 80 mM | 0.0323 mL | 0.1617 mL | 0.3234 mL | 0.8086 mL | |
| 100 mM | 0.0259 mL | 0.1294 mL | 0.2588 mL | 0.6469 mL |
SOD1-Derlin-1 inhibitor-2 Related Classifications
HY-123982 Related Classifications
Powered by Bioz