trans-5-Decenyl acetate
Based on 1 Customer Validation
trans-5-Decenyl acetate is a synthetic sex pheromone component. trans-5-Decenyl acetate attracts male Anarsia lineatella moths when used in a mixture with trans-5-decen-1-ol (HY-W127516). trans-5-Decenyl acetate can be used to monitor male Anarsia lineatella moth activity in peach and almond orchard field.
For research use only. We do not sell to patients.
- Purity: 98.0%
- CAS No.: 38421-90-8
- Formula: C12H22O2
- Molecular Weight:198.31
-
Storage:Pure form -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
Biological Activity
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:male moths[1]
-
Dosage:5 mg (formulated with 1 mg trans-5-decen-1-ol)
-
Administration:loaded into rubber septa dispensers
-
Result:Caught a mean of 2249 male peach twig borer moths, which was the highest catch among tested pheromone formulations.
Exhibited a distinct diel periodicity in response to the pheromone, with peak flight (and trap catch) occurring between 2400 and 0200 Pacific Standard Time.
Detected 3 major seasonal moth flight periods in peach orchards (April-early May, June-July, late August-early September, with a partial October flight).
Detected 4 distinct seasonal moth flight periods in almond orchards (May peak, June peak, July peak, late August-September peak, with moths collected through October-November).
Chemical Information
-
CAS No. 38421-90-8
-
Appearance Liquid (Density: 0.886±0.06 g/cm3)
-
Molecular Weight 198.31
-
Formula C12H22O2
-
Color Colorless to light yellow
-
SMILES
C(CC/C=C/CCCC)COC(C)=O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Pure form -20°C 3 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 100 mg/mL (504.26 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (12.61 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (12.61 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (267 KB)
-
SDS (394 KB)
- English - EN (394 KB)
- Français - FR (394 KB)
- Deutsch - DE (394 KB)
- Norwegian - NO (394 KB)
- Español - ES (394 KB)
- Swedish - SV (394 KB)
- Italian - IT (394 KB)
- Korean - KR (394 KB)
- Portuguese - PT (394 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 5.0426 mL | 25.2131 mL | 50.4261 mL | 126.0653 mL |
| 5 mM | 1.0085 mL | 5.0426 mL | 10.0852 mL | 25.2131 mL | |
| 10 mM | 0.5043 mL | 2.5213 mL | 5.0426 mL | 12.6065 mL | |
| 15 mM | 0.3362 mL | 1.6809 mL | 3.3617 mL | 8.4044 mL | |
| 20 mM | 0.2521 mL | 1.2607 mL | 2.5213 mL | 6.3033 mL | |
| 25 mM | 0.2017 mL | 1.0085 mL | 2.0170 mL | 5.0426 mL | |
| 30 mM | 0.1681 mL | 0.8404 mL | 1.6809 mL | 4.2022 mL | |
| 40 mM | 0.1261 mL | 0.6303 mL | 1.2607 mL | 3.1516 mL | |
| 50 mM | 0.1009 mL | 0.5043 mL | 1.0085 mL | 2.5213 mL | |
| 60 mM | 0.0840 mL | 0.4202 mL | 0.8404 mL | 2.1011 mL | |
| 80 mM | 0.0630 mL | 0.3152 mL | 0.6303 mL | 1.5758 mL | |
| 100 mM | 0.0504 mL | 0.2521 mL | 0.5043 mL | 1.2607 mL |
trans-5-Decenyl acetate Related Classifications
HY-W108419A Related Classifications
Powered by Bioz