9H-Carbazole-3-carbaldehyde
Based on 1 Customer Validation
9H-Carbazole-3-carbaldehyde (3-Formylcarbazole) is a carbazole compound and an anticancer agent. 9H-Carbazole-3-carbaldehyde is present in the stems of Clausena lansium (Lour.) Skeels. 9H-Carbazole-3-carbaldehyde can be used in the research of cervical cancer, leukemia, non-small cell lung cancer and liver cancer.
For research use only. We do not sell to patients.
- Purity: 99.26%
- CAS No.: 51761-07-0
- Formula: C13H9NO
- Molecular Weight:195.22
-
Storage:
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Biological Activity
9H-Carbazole-3-carbaldehyde (36 h) exhibits potent cytotoxicity against SMMC-7721 liver cancer cells with an IC50 of 6.19 μg/mL, potent cytotoxicity against K562 and H1299 cells, moderate cytotoxicity against Hela cells, and weak cytotoxicity against A549 cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:human cervical cancer (Hela), leukemia (K562), non-small cell lung carcinoma (H1299), liver cancer (SMMC-7721), lung cancer (A549)
-
Concentration:Five different concentrations
-
Incubation Time:36 h
-
Result:Exhibited potent cytotoxic activity against SMMC-7721 cells with an IC50 of 6.19 μg/mL.
Exhibited potent cytotoxic activity against K562 cells with an IC50 of 20.48 μg/mL.
Exhibited potent cytotoxic activity against H1299 cells with an IC50 of 13.23 μg/mL.
Exhibited moderate cytotoxic activity against Hela cells with an IC50 of 12.71 μg/mL.
Exhibited weak cytotoxic activity against A549 cells with an IC50 of 37.64 μg/mL.
Chemical Information
-
CAS No. 51761-07-0
-
Appearance Solid
-
Molecular Weight 195.22
-
Formula C13H9NO
-
SMILES
O=CC1=CC2=C(C=C1)NC3=C2C=CC=C3
-
Synonyms
3-Formylcarbazole
-
Structure Classification
-
Initial Source
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Solvent & Solubility
DMSO : 40 mg/mL (204.90 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 4 mg/mL (20.49 mM); Clear solution
This protocol yields a clear solution of ≥ 4 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (40.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (276 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 5.1224 mL | 25.6121 mL | 51.2243 mL | 128.0606 mL |
| 5 mM | 1.0245 mL | 5.1224 mL | 10.2449 mL | 25.6121 mL | |
| 10 mM | 0.5122 mL | 2.5612 mL | 5.1224 mL | 12.8061 mL | |
| 15 mM | 0.3415 mL | 1.7075 mL | 3.4150 mL | 8.5374 mL | |
| 20 mM | 0.2561 mL | 1.2806 mL | 2.5612 mL | 6.4030 mL | |
| 25 mM | 0.2049 mL | 1.0245 mL | 2.0490 mL | 5.1224 mL | |
| 30 mM | 0.1707 mL | 0.8537 mL | 1.7075 mL | 4.2687 mL | |
| 40 mM | 0.1281 mL | 0.6403 mL | 1.2806 mL | 3.2015 mL | |
| 50 mM | 0.1024 mL | 0.5122 mL | 1.0245 mL | 2.5612 mL | |
| 60 mM | 0.0854 mL | 0.4269 mL | 0.8537 mL | 2.1343 mL | |
| 80 mM | 0.0640 mL | 0.3202 mL | 0.6403 mL | 1.6008 mL | |
| 100 mM | 0.0512 mL | 0.2561 mL | 0.5122 mL | 1.2806 mL |